Micro Transportation Systems: A Review
Phuc Hong Pham, Dzung Viet Dao
.
DOI: 10.4236/mme.2011.12005   PDF    HTML     5,546 Downloads   11,633 Views   Citations

Abstract

This paper summarized and reviewed recent studies of micro transportation systems (MTS) in the MEMS (Micro Electro-Mechanical System) field. Micro transportation systems can be identified and classified into three categories based on the contact types between the objects and the actuators (i.e. liquid-based, solid- based and air-bearing type). Their advantages and disadvantages were also analyzed and compared. The au- thors have proposed and developed three types of solid-based MTS utilizing electrostatic comb-drive actua- tors and ratchet mechanisms to drive the micro container in straight and curved paths. These MTSs have been fabricated with silicon-on-insulator (SOI)-MEMS technology and tested successfully. In the near future, MTSs can be applied in different fields such as medicine (to classify and test blood cells), in bioengineering (to capture, sort and combine bio-cells, DNA), or in micro robot systems.

Share and Cite:

P. Pham and D. Dao, "Micro Transportation Systems: A Review," Modern Mechanical Engineering, Vol. 1 No. 2, 2011, pp. 31-37. doi: 10.4236/mme.2011.12005.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] H. Van Brussel, J. Peirs, D. Reynaerts, A. Delchambre, G. Reinhart, N. Roth, M. Weck and E. Zussman, “Assembly of microsystems,” Annals of the CIRP, Vol. 49 No. 2, 2000, pp. 451-472. doi:10.1016/S0007-8506(07)63450-7
[2] M. C. Tarhan, R. Yokokawa, F. O. Morin, S. Takeuchi and H. Fujita, “Sorting and Direct Transportation of Target Molecules by Bio-Molecular Selectivity and Motor Func- tion,” Technical Digest of the 20th IEEE International Conference on Micro Electro Mechanical Systems, Nürnberg, 22-25 May 2007, pp. 23-26.
[3] E. Altintas, K. F. Bohringer and H. Fujita, “Micromachined Linear Brownian Motor: Net-Unidirectional Transport of Nanobeads by Tamed Brownian Motion with Electrostatic Rectification,” Technical Digest of the 20th IEEE International Conference on Micro Electro Mechanical Systems, Nürnberg, 22-25 May 2007,, pp. 839-842.
[4] S. K. Chung, Y. Zhao, U. C. Yi and S. K Cho, “Micro Bubble Fluidics by Electrowetting on Dielectric and Ul- trasonic Excitation for Micro Bubble Tweezers,” Technical Digest of the 20th IEEE International Conference on Micro Electro Mechanical Systems, Nürnberg, 22-25 May 2007, pp. 31-34.
[5] S. K. Cho, H. Moon, and C. -J. Kim, “Creating Transporting, Cutting and Merging of Liquid Droplets by Elec- trowetting-Based Actuation for Digital Microfluidic Circuits,” Journal of Microelectromechanical Systems, Vol. 12, No. 1, 2003, pp. 70-80. doi:10.1109/JMEMS.2002.807467
[6] K.-S. Yun and C.-J Kim, “Low-Voltage Electrostatic Ac- tuation of Droplet on Thin Superhydrophobic NanoTurf,” Technical Digest of the 20th IEEE International Conference on Micro Electro Mechanical Systems, Nürnberg, 22-25 May 2007, pp. 139-142.
[7] M. Ataka, M. Mita and H. Fujita, “The Layer-Built Sen- sor/Actuator Integrated Array for the 2D Feedback Con- veyance”, Technical Digest of the 20th IEEE International Conference on Micro Electro Mechanical Systems, Nürn- berg, 22-25 May 2007, pp. 35-38.
[8] M. Ataka, A. Omodaka, N. Takeshima and H. Fujita, “Fabrication and Operation of Polyimide Bimorph Actuators for a Ciliary Motion System,” Journal of Microelectromechanical Systems, Vol. 2, No. 4, 1993, pp. 146- 150. doi:10.1109/84.273089
[9] Chien-Tai Wu and Wensyang Hsu, “Design and Fabrica- tion of an Electrothermal Microactuator for Multi-Level Conveying,” Journal of Microelectromechanical Systems, Vol. 12, No. 4, 2006, pp. 293-298.
[10] T. Ebefors, J. Mattsson, E. Kalvesten and G. Stemme, “A Micro Motion System Based on Polyimide Joint Actua- tors,” Proceedings of EUROSENSORS XII, Southampton, 13-16 September 1998, pp. 391-394.
[11] T. Ebefors, J. Ulfstedt-Mattsson, E. Kalvesten and G. Ste- mme, “A Robust Micro Conveyer Realized by Arrayed Polyimide Joint Actuators,” Journal of Micromechanics and Microengineering, Vol. 10, No. 3, 2000, pp. 337-349. doi:10.1088/0960-1317/10/3/307
[12] J. Suh, S. Glader,R. Darling,C. Storment and G. Kovacs, “Organic Thermal and Electrostatic Ciliary Microactuator Array for Object Manipulation,” Sensors Actuators A, Vol. 58, No. 1, 1997, pp. 51-60. doi:10.1016/S0924-4247(97)80224-5
[13] P. E. Kladitis, V.M. Bright, K. F. Harsh and Y. C. Lee, “Prototype Microrobots for Micro Positioning in a Manu- Facturing Process and Micro Unmanned Vehicles,” Proceedings of the 12th IEEE International Micro Electro Mechanical System Conference, Orlando, 17-21 January 1999, pp. 570-575.
[14] D. Ruffieux and N. F. de Rooij, “A 3DOF Bimorph Actuator Array Capable of Locomotion,” Proceedings of the 13th European Conference on Solid-State Transducers, The Hague, 12-15 September 1999, pp. 725-728.
[15] C. Liu, T. Tsai, Y. C. Tai, W. Liu, P. Will and C.M. Ho, “A Micromachined Permalloy Magnetic Actuator Array for Micro Robotics Assembly Systems,” Proceedings of International Conference on Solid-State Sensors and Actuators, Sweden, 25-29 June 1995, pp. 328-331.
[16] T. Furuhata, T. Hirano and H. Fujita, “Array-Driven Ultrasonic Microactuators,” Proceedings of International Conference on Solid-State Sensors and Actuators, San Francisco, 24-27 June 1991, pp. 1056-1059.
[17] T. Shigematsu and M. K. Kurosawa, “XY Surface Acoustic Wave Motor with Nanometer Resolution,” Proceeding of 21st Sensor Symposium, Baltimore, 3-4 November 2004, pp. 237-240.
[18] T. Hata, H. Tsuyoshi, D. V. Dao and S. Sugiyama, “Theoretical and Experimental Study on Micro Fluidic Actuator Utilizing Surface Acoustic Wave,” International Sympo- sium on Flexible Automation, Osaka, 10-12 July 2006, pp. 120-123.
[19] M. Edo, Y. Watanabe, O. Morita, H. Nakazawa and E. Yonezawa, “Two-Dimensional Micro Conveyer with In- tegrated Electrostatic Actuators,” The 12th IEEE Interna- tional Conference on Micro Electro Mechanical Systems, Orlando, 17-21 January 1999, pp. 43-48.
[20] T. Y. Harness and R. A. Richard, “Characteristic Modes of Electrostatic Comb-Drive X-Y Microactuators,” Journal of Micromechanics and Microengineering, Vol. 10, No. 1, 2000, pp. 7-14. doi:10.1088/0960-1317/10/1/302
[21] R. Yeh, S. Hollar and K. S. J. Pister, “Single Mask, Large Force, and Large Displacement Electrostatic Linear Inch- worm Motors,” Journal of Microelectromechanical Systems, Vol. 11, No. 4, 2002, pp. 330-336. doi:10.1109/JMEMS.2002.800937
[22] S. H. Kim, et al., “High-Resolution Inchworm Linear Motor Based on Electrostatic Twisting Microactuators,” Journal of Micromechanics and Microengineering, Vol. 15, No. 9, 2005, pp. 1674-1682. doi:10.1088/0960-1317/15/9/009
[23] I. Fujimasa, “Micromachines, a New Era in Mechanical Engineering,” Oxford University Press, Oxford, 1996, pp. 115-117.
[24] K. S. J. Pister, R. S. Fearing and R. T. Howe, “A Planar Air Levitated Electrostatic Actuator System,” Proceedings of the IEEE 5th Workshop on Micro Electro Mecha- nical Systems, 1990, pp. 67-71.
[25] S. Konishi and H. Fujita, “A Conveyance System Using Air Flow Based on the Concept of Distributed Micro Mo- tion Systems,” IEEE Journal of Microelectromechanical Systems, Vol. 3, No. 2, 1994, pp. 54-58. doi:10.1109/84.294321
[26] Y. Mita, S. Konishi and H. Fujita, “Two Dimensional Micro Conveyance Systems with through Holes for Electrical and Fluidic Interconnection,” Proceedings of International Conference on Solid State Sensors and Actuators, Chicago, 16-19 June 1997, pp. 16-19. doi:10.1109/SENSOR.1997.613575
[27] Y. Fukuta, M. Yanada, A. Ino, Y. Mita, Y. A. Chapuis, S. Konishi and H. Fujita, “Conveyor for Pneumatic Two- Dimensional Manipulation Realized by Arrayed MEMS and its Control,” Journal of Robotics and Mechatronics, Vol. 16, No. 2, 2004, pp. 163-170.
[28] T. Hirata, T. Akashi, A. Bertholds, H. P. Gruber, A. Schmid, M. -A. GrCtillat, O. T. Guenat and N. F. de RooiJ, “A Novel Pneumatic Actuator System Realized by MicroElectro-Discharge Machining,” Technical Digest of the 11th IEEE International Conference on Micro Electro Mechanical Systems, 1998, pp. 160-165.
[29] Y.-K. Kim , M. Katsurai and H. Fujita 1990 “Fabrication and testing of a micro superconducting actuator using the Meissner effect,” Proceedings of Ninth International Workshop on Micro Electromechanical Systems, Napa Valley, 11-14 February 1990, pp. 61-66.
[30] H. Nakazawa, Y. Wantanabe, O. Morita, M. Edo, M. Yushina and E. Yonezawa, “Electromagnetic Micro-Parts Conveyer with Coil-Diode Modules,” Technical Digest, Proceedings of 16th International Conference on Solid State Sensors and Actuators, Sendai, 7-10 June 1999, pp. 1192-1195.
[31] P. H. Pham, D. V. Dao, S. Amaya, R. Kitada and S. Sugiyama, “Straight Movement of Micro Containers Based on Ratchet Mechanism and Electrostatic Comb-Drive Ac- tuators,” Journal of Micromechanics and Microengineer- ing, Vol. 16, No. 12, 2006, pp. 2532-2538. doi:10.1088/0960-1317/16/12/003
[32] P. H. Pham, D. V. Dao and S. Sugiyama, “Micro Trans- portation System (MTS) with Large Movement of Con- tainers Driven by Electrostatic Comb-Drive Actuators,” Journal of Micromechanics and Microengineering, Vol. 17, No. 10, 2007, pp 2125-2131. doi:10.1088/0960-1317/17/10/026
[33] P. H. Pham, L. B. Dang and H. N. Vu, “Micro Robot Sys- tem with Moving Micro-Car Driven by Electrostatic Comb- Drive Actuators,” Microsystem Technologies, Vol. 16, No. 4, 2010, pp. 505-510. doi:10.1007/s00542-010-1017-9
[34] D. V. Dao, P. H. Pham and S. Sugiyama, “A Novel Micro Transportation System with Fast Movement of a Micro Container Based on Electrostatic Actuation and a Ratchet Mechanism,” Journal of Micromechanics and Microengineering, Vol. 20, No. 11, 2010. doi:10.1088/0960-1317/20/11/115026

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.