Share This Article:

RETRACTED: A Simplified Thermal Modelling of Cooling Tower for Optimization of HVAC Systems to Enhance Energy Efficiency

Abstract Full-Text HTML Download Download as PDF (Size:1764KB) PP. 335-343
DOI: 10.4236/ojapps.2015.57034    3,046 Downloads   3,669 Views  

ABSTRACT

Short Retraction Notice

The paper does not meet the standards of "Open Journal of Applied Sciences".

This article has been retracted to straighten the academic record. In making this decision the Editorial Board follows COPE's Retraction Guidelines. The aim is to promote the circulation of scientific research by offering an ideal research publication platform with due consideration of internationally accepted standards on publication ethics. The Editorial Board would like to extend its sincere apologies for any inconvenience this retraction may have caused.

Editor guiding this retraction: Professor Harry E. Ruda (EiC of OJAppS)

The full retraction notice in PDF is preceding the original paper, which is marked "RETRACTED".

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

  

References

[1] Bureau of Energy Efficiency, Ministry of Power, Government of India (2009) Energy Conservation Building Code (ECBC). Bureau of Energy Efficiency, Ministry of Power, Government of India, New Delhi.
[2] (2011) CO2 Emissions from Fuel Combustion Highlights. 2011 Edition, International Energy Agency, France.
[3] (2012) Natural Gas—Proved Reserves. CIA World Fact Book.
[4] ASHRAE (2008) ASHRAE Handbook—2008 HVAC Systems and Equipment: American Society of Heating, Refrigerating, and Air-Conditioning Engineers.
[5] Facão, J. and Oliveira, A.C. (2000) Thermal Behavior of Closed Wet Cooling Towers for Use with Chilled Ceilings. Applied Thermal Engineering, 20, 1225-1236.
http://dx.doi.org/10.1016/S1359-4311(99)00096-4
[6] Facão, J. and Oliveira, A. (2004) Heat and Mass Transfer Correlations for the Design of Small Indirect Contact Cooling Towers. Applied Thermal Engineering, 24, 1969-1978.
http://dx.doi.org/10.1016/j.applthermaleng.2004.02.007
[7] Xia, Z.Z., Chen, C.J. and Wang, R.Z. (2011) Numerical Simulation of a Closed Wet Cooling Tower with Novel Design. International Journal of Heat and Mass Transfer, 54, 2367-2374. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2011.02.025
[8] Zheng, W.Y., Zhu, D.S., Zhou, G.Y., Wu, J.F. and Shi, Y.Y. (2012) Thermal Performance Analysis of Closed Wet Cooling Towers under both Unsaturated and Supersaturated Conditions. International Journal of Heat and Mass Transfer, 55, 7803-7811.
http://dx.doi.org/10.1016/j.ijheatmasstransfer.2012.08.006
[9] Papaefthimiou, V.D., Rogdakis, E.D., Koronaki, I.P. and Zannis, T.C. (2012) Thermodynamic Study of the Effects of Ambient Air Conditions on the Thermal Performance Characteristics of a Closed Wet Cooling Tower. Applied Thermal Engineering, 33-34, 199-207.
http://dx.doi.org/10.1016/j.applthermaleng.2011.09.035
[10] Sarker, M.M.A., Kim, E., Moon, C.G. and Yoon, J.I. (2008) Performance Characteristics of the Hybrid Closed Circuit Cooling Tower. Energy and Buildings, 40, 1529-1535.
http://dx.doi.org/10.1016/j.enbuild.2008.02.010
[11] Hasan, A. and Sirén, K. (2002) Theoretical and Computational Analysis of Closed Wet Cooling Towers and Its Applications in Cooling of Buildings. Energy and Buildings, 34, 477-486. http://dx.doi.org/10.1016/S0378-7788(01)00131-1
[12] Stabat, P. and Marchio, D. (2004) Simplified Model for Indirect-Contact Evaporative Cooling-Tower Behaviour. Applied Energy, 78, 433-451.
http://dx.doi.org/10.1016/j.apenergy.2003.09.004
[13] Li, Y.A. (2008) Closed-Circuit Cooling Tower for Air Conditioning. China Architecture & Building Press, Beijing. (In Chinese)
[14] Lian, Z.W., Zhang, Y.P., Chen, B.M. and Cao, D.X. (2005) Heat and Mass Transfer Principles and Equipment. China Architecture & Building Press, Beijing. (In Chinese)
[15] Jin, G.Y., Cai, W.J., Lu, L., Lee, E.L. and Chiang, A. (2007) A Simplified Modeling of Mechanical Cooling Tower for Control and Optimization of HVAC Systems. Energy Conversion and Management, 48, 355-365.
http://dx.doi.org/10.1016/j.enconman.2006.07.010
[16] Jiang, J.J., Liu, X.H. and Jiang, Y. (2013) Experimental and Numerical Analysis of a Cross-Flow Closed Wet Cooling Tower. Applied Thermal Engineering, 61, 678-689.
http://dx.doi.org/10.1016/j.applthermaleng.2013.08.043
[17] You, J. (2010) Numerical Simulation and Optimization of Closed-Wet Cooling Tower. Master Thesis, School of Environmental Science and Engineering, Donghua University, Shanghai. (In Chinese)
[18] Cortinovis, G.F., Paiva, J.L., Song, T.W. and Pinto, J.M. (2009) A Systemic Approach for Optimal Cooling Tower Operation. Energy Conversion and Management, 50, 2200-2209. http://dx.doi.org/10.1016/j.enconman.2009.04.033
[19] Al-Bassam, E. and Alasseri, R. (2013) Measurable Energy Savings of Installing Variable Frequency Drives for Cooling Towers’ Fans, Compared to Dual Speed Motors. Energy and Buildings, 67, 261-266. http://dx.doi.org/10.1016/j.enbuild.2013.07.081

  
comments powered by Disqus

Copyright © 2019 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.