Comparison of Different Control Algorithms for a Gantry Crane System ()
Abstract
For a gantry crane system, this paper presents a comparison between four control algorithms. These algo-rithms are being compared on simplicity, stability and robustness. Goal for the controller is to move the load on a gantry crane to a new position with minimal overshoot of the load and maximal speed of the load. An-other goal is to provide an insight in the behaviour of the possible controllers. In this article a parallel P-controller, cascade P-controller, fuzzy controller and an internal model controller are used. To be able to validate and design the controllers a model is derived from the gantry crane. The controllers and the model are being implemented in Matlab Simulink. Finally the controllers are validated and tuned in Labview on a laboratory gantry scrane scale model. Main conclusion is that all presented controllers can be used as a con-troller for the gantry crane system but the fuzzy controller is showing the best performance.
Share and Cite:
S. Bruins, "Comparison of Different Control Algorithms for a Gantry Crane System,"
Intelligent Control and Automation, Vol. 1 No. 2, 2010, pp. 68-81. doi:
10.4236/ica.2010.12008.
Conflicts of Interest
The authors declare no conflicts of interest.
References
|
[1]
|
S. J. Nordfjord and H. Pálsson, “LEGO-Crane Controller using RCX and RoboLab”. http://fuzzy.iau.dtu.dk/ download/lego9/lego9.pdf
|
|
[2]
|
M. A. Ahmad and A. N. K. Nasir, “Hybrid Input Shaping and LQR control schemes of a Gantry Crane System,” Proceedings of the 3rd International Conference on Mechatronics, ICOM’08, pp. 365-372
|
|
[3]
|
S. W. Su, H. Nguyen, R. Jarman, J. Zhu, D. Lowe, P. McLean, S. Huang, N. T. Nguyen, R. Nicholson and K. Weng, “Model Predictive Control of Gantry Crane with Input Nonlinearity Compensation,” Proceedings of World Academy of Science, Engineering and Technology, Vol. 3, 8 february 2009, pp. 312-316.
|
|
[4]
|
H. Butler, G. Honderd and J. van Amerongen, “Model Reference Adaptive Control of a Gantry Crane Scale Model,” IEEE Control System, January 1991, pp. 57-62
|
|
[5]
|
Wahyudi, J. Jalani, R. Muhida and M. J. E. Salami, “Control Strategy for Automatic Gantry Crane Systems: A Practical and Intelligent Approach,” International Journal of Advanced Robotic Systems, Vol. 4, No. 4, (2007), pp 447-456
|
|
[6]
|
P. Reading, “One-Degree of Freedom Internal Model Control,” 2002, pp. 39-64. http://www.bgu.ac.il/chem_ eng/pages/Courses/oren%20courses/Chapter%203%20-%20corrected%2002.pdf
|