[1]
|
R. M. Jones, “Mechanics of Composite Materials,” McGraw-Hill, Kogakusha Ltd., Tokyo, 1975.
|
[2]
|
S. B. Singh and D. Kumar, “Postbuckling Response and Failure of Symmetric Laminated Plates with Rectangular Cutouts under Uniaxial Compression,” Structural Engineering and Mechanics, Vol. 29, No. 4, 2008, pp. 455-467.
|
[3]
|
T. Ozden, “Analysis of Critical Buckling Load of Laminated Composites Plate with Different Boundary Conditions Using FEM and Analytical Methods,” Computational Materials Science, Vol. 45, No. 4, 2009, pp. 1006-1015. doi:10.1016/j.commatsci.2009.01.003
|
[4]
|
S. K. Panda and L. S. Ramachandra, “Buckling of Rectangular Plates with Various Boundary Conditions Loaded by Non-Uniform In-Plane Loads,” International Journal of Mechanical Sciences, Vol. 52, No. 6, 2010, pp. 819-828. doi:10.1016/j.ijmecsci.2010.01.009
|
[5]
|
D. Kumar and S. B. Singh, “Effects of Boundary Conditions on Buckling and Postbuckling Responses of Composite Laminate with Various Shaped Cutouts,” Composite Structures, Vol. 92, No. 3, 2010, pp. 769-779.
doi:10.1016/j.compstruct.2009.08.049
|
[6]
|
S. B. Singh and D. Kumar, “Postbuckling Response and Failure of Symmetric Laminated Plates with Rectangular Cutouts under In-Plane Shear,” Structural Engineering and Mechanics, Vol. 34, No. 2, 2010, pp. 175-188.
|
[7]
|
Y. Zhang and F. L. Matthews, “Postbuckling Behaviour of Anisotropic Laminated Plates under Pure Shear and Shear Combined with Compressive Loading,” Journal of American Institute of Aeronautics and Astronautics, Vol. 22, No. 2, 1984, pp. 281-286.
|
[8]
|
S. B. Singh and A. Kumar, “Postbuckling Response and Failure of Symmetric Laminates under In-Plane Shear,” Composite Science and Technology, Vol. 58, No. 12, 1998, pp. 1949-1960.
doi:10. 1016/S0266-3538(98)00032-3
|
[9]
|
M. P. Nemeth, “Buckling and Postbuckling Behavior of Laminated Composite Plates with a Cutout,” 1996.
|
[10]
|
V. O. Britt, “Shear and Compression Buckling Analysis for Anisotropic Panels with Elliptical Cutouts,” Journal of American Institute of Aeronautics and Astronautics, Vol. 32, No. 11, 1994, pp. 2293-2299.
|
[11]
|
R. J. Herman, “Postbuckling Behavior of Graphite/Epoxy Cloth Shear Panels with 45°-Flanged Lightening Holes,” M.S. Thesis, Naval Postgraduate School, Monterey, 1982.
|
[12]
|
G. J. Turvey and K. Sadeghipour, “Shear Buckling of Anisotropic Fibre-Reinforced Rectangular Plates with Central Circular Cutouts,” Proceedings of the International Conference Computer Aided Design in Composite Material Technology, Southampton, 1988, pp. 459-473.
|
[13]
|
S. Vellaichamy, B. G. Prakash and S. Brun, “Optimum Design of Cutouts in Laminated Composite Structures,” Computers & Structures, Vol. 37, No. 3, 1990, pp. 241-246. doi:10.1016/0045-7949(90)90315-S
|
[14]
|
P. N. Jha and A. Kumar, “Response and Failure of Square Laminates under Combined Loads,” Composite Structures, Vol. 55, No. 3, 2002, pp. 337-345.
doi:10.1016/S0263-8223(01)00141-6
|
[15]
|
P. Jain and A. Kumar, “Postbuckling Response of Square Laminates with a Central Circular/Elliptical Cutout,” Composite Structures, Vol. 65, No. 2, 2004, pp. 179-185.
doi:10.1016/j.compstruct. 2003.10.014
|
[16]
|
S. J. Guo, “Stress Concentration and Buckling Behaviour of Shear Loaded Composite Panels with Reinforced Cutouts,” Composite Structures, Vol. 80, No. 1, 2007, pp. 1-9. doi:10.1016/j.compstruct. 2006.02.034
|
[17]
|
S. Guo, R. Morishima, X. Zhang and A. Mills, “Cutout Shape and Reinforcement Design for Composite C-Section Beams under Shear Load,” Composite Structures, Vol. 88, No. 2, 2009, pp. 179-187.
doi:10.1016/j.compstruct.2008.03.001
|
[18]
|
D. Kumar and S. B. Singh, “Postbuckling Strengths of Composite Laminate with Various Shaped Cutouts under In-Plane Shear,” Composite Structures, Vol. 92, No. 12, 2010, pp. 2966-2978.
doi:10.1016/j.compstruct.2010.05.008
|
[19]
|
O. O. Ochoa and J. N. Reddy, “Finite Elements Analysis of Composite Laminates,” Kluwer Academic Publishers, Dordrecht, 1992.
|
[20]
|
S. B. Singh, “Postbuckling Response, Strength and Failure of Symmetric Laminates,” Ph.D. Dissertation, Indian Institute of Technology, Kanpur, 1996.
|
[21]
|
S. Kosteletos, “Postbuckling Response of Laminated Plates under Shear Loads,” Composite Structures, Vol. 20, No. 3, 1992, pp. 137-145. doi:10.1016/0263-8223(92)90020-D
|
[22]
|
Z. Hashin, “Failure Criteria for Unidirectional Fiber Composites,” Journal of Applied Mechanics, Vol. 47, No. 3, 1980, pp. 329-334. doi:10.1115/1.3153664
|
[23]
|
S. W. Tsai, “A Survey of Macroscopic Failure Criteria for Composite Materials,” Journal of Reinforced Plastics and Composites, Vol. 3, No. 1, 1984, pp. 40-62.
doi:10.1177/073168448400300102
|