[1]
|
G. T. R. Reader, M. Zheng, I. J. Potter and J. G. Hawley, “Investigation of Non-Air Diesel Engine Systems,” 28th Inter-Socity Energy Conversion Engineering Conference, San Diego, 1992.
|
[2]
|
K. Fukuda, A. Ghasemi, R. Barron and R. Balachandar, “An Open Cycle Simulation of DI Diesel Engine Flow Field Effect on Spray Processes,” SAE Technical Paper 2012-01-0696, 2012. doi:10.4271/2012-01-0696
|
[3]
|
A. S. Kuleshov, “Multi-Zone DI Diesel Spray Combustion Model for Thermodynamic Simulation of Engine with PCCI and High EGR Level,” SAE Paper No 2009- 01-1956, 2009.
|
[4]
|
H. Barths, H. Pitsch and N. Peters, “3d Simulation of Di Diesel Combustion and Pollutant Formation Using a TwoComponent Reference Fuel,” Oil & Gas Science and Technology, Vol. 54, No. 2, 1999.
|
[5]
|
L. V. Griend, M. E. Feldman and C. L. Peterson, “Modeling Combustion of Alternate Fuels in a DI Diesel Engine Using KIVA,” ASAE, Vol. 33, No. 2, 1990, pp. 342-350.
|
[6]
|
B. A. Cantrell, R. D. Reitz, C. J. Rutland and Y. Immamori, “Strategies for Reducing the Computational Time of Diesel Engine CFD Simulations,” International Multidimensional Engine Modeling User’s Group Meeting, SAE Congress, 23 April 2012
|
[7]
|
S. A. Basha and K. R. Gopal, “In-Cylinder Fluid Flow Turbulence and Spray Models,” Renewable and Sustainable Energy Reviews, Vol. 13, No. 6-7, 2008, pp. 1620-1627.
|
[8]
|
S. M. Jameel Basha, P. Issac Prasad and K. Rajagopal, “Simulation of In-Cylinder Processes in a DI Diesel Engine with Various Injection Timings,” ARPN Journal of Engineering and Applied Sciences, Vol. 4, No. 1, 2009.
|
[9]
|
U. V. Kongre and V. K. Sunnapwar, “CFD Modeling and Experimental Validation of Combustion in Direct Ignition Engine Fueled with Diesel,” International Journal of Applied Engineering Research, Vol. 1, No. 3, 2010.
|
[10]
|
Fluent-ANSYI, “FLUENT 6.3.26. 2006. User’s Manual and Tutorial Guide,” Fluent Inc., 2006.
|
[11]
|
KHD Deutz, “FL 511/W Instruction Manual,” 2973544D/ E, 2000.
|
[12]
|
Oruva Motor, “F1L511 Diesel Engine Technical Data,” Licensed from Dutez, 2000.
|
[13]
|
A. M. Nour, E. M. Marzouk, A. A. Abel Rahman and W. A. Abdel Ghafar, “Effect of Carbon Dioxide in Non-Air Inlet Mixture on Combustion performance in Diesel Engine,” IREME, 2009
|
[14]
|
B. E. Launder and D. B. Spalding, “Lectures in Mathematical Models of Turbulence,” Academic Press, London, 1972.
|
[15]
|
B. F. Magnussen, “On the Structure of Turbulence and a Generalized Eddy Dissipation Concept for Chemical Reaction in Turbulent Flow,” Nineteenth AIAA Meeting, St. Louis, 1981.
|
[16]
|
G. L. Borman and K. W. Ragland, “Combustion Engineering,” WCB, McGraw-Hill, 1998.
|
[17]
|
H. O. Hardenburg and F. W. Hase, “An Empirical Formula for Computing the Pressure Rise Delay of a Fuel from Its Cetane Number and from the Relevant Parameters of Direct Injection Diesel Engines,” SAE Technical Paper 790493, SAE, 1979.
|
[18]
|
P. J. O’Rourke and A. A. Amsden, “The TAB Method for Numerical Calculation of Spray Droplet Breakup,” SAE Technical Paper 872089, SAE, 1987.
|
[19]
|
R. D. Reitz, “Mechanisms of Atomization Processes in High-Pressure Vaporizing Sprays,” Atomization and Spray Technology, Vol. 3, No. 4, 1987, pp. 309-337.
|
[20]
|
R. D. Reitz and F. V. Bracco, “Mechanisms of Breakup of Round Liquid Jets,” The Encyclopedia of Fluid Mechanics, Vol. 3, 1986, pp. 223-249.
|
[21]
|
P. A. Tesner, T. D. Snegiriova and V. G. Knorre, “Kinetics of Dispersed Carbon Formation,” Combustion and Flame, Vol. 17, No. 2, 1971, pp. 253-260.
doi:10.1016/S0010-2180(71)80168-2
|
[22]
|
J. F. Wiedenhoefer and R. D. Reitz, “Multidimensional Modeling of the Effects of Radiation and Soot Deposition in Heavy-Duty Diesel Engines,” SP-1740 SAE 2003-01- 0560, 2003, pp. 251-271.
|
[23]
|
J. B. Heywood, “Internal Combustion Engine Fundamentals,” McGraw Hill, New York, 1988.
|