An Exploratory Study of Batch Splitting through Combined Control of Release and Dispatching

Nuno O. Fernandes, S. Carmo -Silva

Dept. of Production and Systems University of Minho, Braga, Campus de Gualtar 4710-057, Portugal.
School of Technology Polytechnic Institute of Castelo Branco Castelo Branco, Av. do Empresário 6000-767, Portugal.

DOI: 10.4236/ce.2012.37B006                

Abstract

Workload Control (WLC) has been developed as a production planning and control approach for make-to-order manufacturing. Previous studies on WLC often assume a simplified shop where released batches are treated as independent jobs, which proceed through the different stages of processing without being split. Batch splitting allows released batches to be split into a number of smaller sub-batches so that its operations at work centres can be overlapped and its progress accelerated. This paper investigates how WLC performs under batch splitting. Evaluating the performance of WLC in this context is an important step towards the alignment between WLC theory and practice. Thus, assuming a production situation with unbalanced utilizations of manufacturing resources, the effectiveness of different dispatching rules and job release strategies are examined using simulation. Results highlight the importance of controlled release of jobs to the shop floor and the importance of differentiating between bottleneck and non-bottleneck work centres for purpose of dispatching.

Keywords

Order Release; Dispatching; Batch Splitting

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	Land, M. and Gaalman, G., “Workload control concepts in job shops: A critical assessment”, Int. Journal of Production Economics, Vol. 46–47, No.1, pp. 535-548, 1996.
[2]	Hendry, L., Huang, Y. and Stevenson, M., “Workload control: Successful implementation taking a contingency-based view of production planning & control”, To appear in: Int. Journal of Operations and Production Management, 2012.
[3]	Portioli A. and Tantardini, M., “A lean-based ORR system for non-repetitive manufacturing”. Int. Journal of Production Research, Vol. 50, No. 12, pp. 3257-3273, 2011.
[4]	Fernandes, N.O. and Carmo-Silva, S., “Workload control under continuous order release”, Int. Journal of Production Economics, Vol. 131, No. 1, pp. 257-262, 2011.
[5]	Thurer, M., Stevenson, M., Silva, C, Land, M.J., and Fredendall, L.D., "Workload control (WLC) and order release: a lean solution for make-to-order companies" To appear in: Production and Operations Management, 2012.
[6]	Jacobs, F.R. and Bragg, D.J., “Repetitive lots: flow time reductions through sequencing and dynamic batch sizing”, Decision Sciences, Vol.19, pp.281-294, 1988.
[7]	Wanger, B.J. and Ragatz, G.L., “The impact of lot splitting on due date performance”, Journal of Operations Management, Vol. 12, No. 1, pp.13-25, 1994.
[8]	Smunt, T.L., Buss, A.H. and Kropp, D.H., “Lot Splitting in Stochastic Flow Shop and Job Shop Environments”, Decision Sciences, Vol. 27, No. 2, pp. 215–238, 1996.
[9]	Russell, G.R., and Fry, T.D. (1997), “Order review/release and lot splitting in drum-buffer-rope”, Int. Journal of Production Research, Vol. 35, No. 3, pp. 827-845.
[10]	Enns, ST, “An integrated system for controlling shop loading and work flows”. Int. journal of production research, Vol 33, No 10, 2801-2820, 1995.
[11]	Fredendall, L.D., Divesh, O., and Patterson, J.W., “Concerning the theory of workload control”. European Journal of Operational Research, 201, 99–111, 2010.
[12]	Oosterman, B., Land, M. and Gaalman, G.,“The influence of shop characteristics on workload control”, Int. Journal of Production Economics, Vol. 68, No. 1, pp. 107–119, 2000.
[13]	Land, M., “Parameters and sensitivity in workload control”, Int. Journal of Production Economics, Vol. 104, No. 2, pp. 625–638, 2006.