New Nanocrystalline Matrix Materials for Sintered Diamond Tools ()
Abstract
The work presents the possibility of substitution of expensive, wear resistant Co-WC powders, that have been traditionally used in the production of sintered diamond tools, with cheap iron-base counterparts manufactured by ball milling. It has been shown that ball-milled Fe-Ni-Cu-Sn-C powders can be consolidated to a virtually pore-free condition by hot pressing at 900 ℃. The as-consolidated material has nanocrystalline structure and is characterised by a combination of high hardness, mechanical strength and excellent resistance to abrasion. Its properties can be widely modified by changing the milling conditions.
Share and Cite:
J. Konstanty and A. Romanski, "New Nanocrystalline Matrix Materials for Sintered Diamond Tools,"
Materials Sciences and Applications, Vol. 3 No. 11, 2012, pp. 779-783. doi:
10.4236/msa.2012.311113.
Conflicts of Interest
The authors declare no conflicts of interest.
References
[1]
|
J. Konstanty, “Cobalt as a Matrix in Diamond Impregnated Tools for Stone Sawing Applications,” 2nd Edition, Agh-Uwnd, Krakow, 2003.
|
[2]
|
Anon, “2011 Production Statistics,” Cobalt News, 2012, p. 3.
|
[3]
|
Anon, “A New Generation of Powders for the Diamond Tool Industry,” Marmomacchine International, Vol. 18, 1997, p. 156.
|
[4]
|
I. E. Clark and B.-J. Kamphuis, “Cobalite HRR—A New Prealloyed Matrix Powder for Diamond Construction Tools,” Industrial Diamond Review, Vol. 62, 2002, p. 177.
|
[5]
|
J. Konstanty, T. F. Stephenson and D. Tyrala, “Novel Fe-Ni-Cu-Sn Matrix Materials for the Manufacture of Diamond-Impregnated Tools,” Diamond Tooling Journal, Vol. 3, 2011, p. 26.
|
[6]
|
D. Tyrala, “Engineering Structure and Properties of Sin- tered Fe-Ni-Cu-Sn Materials Used as a Matrix in Diamond-Impregnated Tools (in Polish),” Ph.D. Thesis, AGH- University of Science & Technology, Krakow, 2010.
|
[7]
|
J. Konstanty, D. Tyrala, A. Radziszewska and W. Ra- tuszek, “Properties of Iron-Base Materials Manufactured from Premixed Powders by the Hot Press Process,” Proceedings of the 5th International Powder Metallurgy Con- ference, Ankara, 8-10 October 2008.
|
[8]
|
K. Geels, “The True Microstructure of Materials,” Structure, Vol. 35, 2000, p. 5.
|