Study of Potentiodynamic Polarization Behaviour of Electroless Ni-B Coatings and Optimization using Taguchi Method and Grey Relational Analysis

DOI: 10.4236/jmmce.2011.1014103   PDF   HTML     5,668 Downloads   7,727 Views   Citations


Electroless nickel coatings are very popular for their corrosion resistant actions. The present article attempts to study the corrosion behaviour of electroless Ni-B coatings by varying the coating parameters viz. bath temperature, reducing agent concentration and nickel source concentration together with the annealing temperature. The electrochemical parameters viz., corrosion potential and corrosion current density are evaluated with the help of potentiodynamic polarization experimentation. Taguchi based Grey analysis is employed in order to optimize this multiple response problem and the optimal combination of parameters for maximum corrosion resistance for Ni-B coatings is presented. Moreover, analysis of variance reveals that bath temperature and concentration of nickel source have significant influence on the corrosion performance of the coating. The microstructure characterization of the coating is also conducted with the help of scanning electron microscopy, energy dispersive X-ray analysis and X-ray diffraction analysis. The Ni-B coating in general exhibits a nodular structure and turns crystalline with heat treatment. The corroded surface exhibits cracks and black spots which imply the occurrence of localized corrosion.

Share and Cite:

S. Das and P. Sahoo, "Study of Potentiodynamic Polarization Behaviour of Electroless Ni-B Coatings and Optimization using Taguchi Method and Grey Relational Analysis," Journal of Minerals and Materials Characterization and Engineering, Vol. 10 No. 14, 2011, pp. 1307-1327. doi: 10.4236/jmmce.2011.1014103.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] Mallory, G.O. and Hadju, J.B. (1991), “Electroless Plating: Fundamentals and Applications”, AESF, Orlando.
[2] Riedel, W. (1991), “Eletroless nickel plating. Stevenage”, Finishing Publications Ltd., Hertfordshire, UK.
[3] Agarwala, R.C. and Agarwala, V. (2003), “Electroless alloy/composite coatings: A review”, Sadhana 28(3-4), pp. 475-493.
[4] Sahoo, P. and Pal, S.K. (2007), “Tribological performance optimization of electroless Ni-P coatings using the Taguchi method and grey relational analysis”, Tribol Lett 28(2), pp. 191-201.
[5] Sahoo, P. and Das, S.K. (2011), “Tribology of electroless nickel coatings - A review”, Mater Des 32, pp. 1760-1775.
[6] Narayanan, T.S.N.S., Krishnaveni, K. and Seshadri, S.K. (2003), “Electroless Ni-P/Ni- B duplex coatings: Preparation and evaluation of microhardness, wear and corrosion resistance”, Mater Chem Phys 82(3), pp. 771-779.
[7] Kanta, A.F., Vitry, V. and Delaunois, F. (2009), “Wear and corrosion resistance behaviours of autocatalytic electroless plating”, J Alloys Compd 486(1-2), pp. L21-23.
[8] Delaunois. F. and Lienard, P. (2002), “Heat treatments for electroless nickel-boron plating on aluminium alloys”, Surf Coat Technol 160(2-3), pp. 239-248.
[9] Srinivasan, K.N., Meenakshi, R. and Santhi, A., Thangavelu, P.R. and John, S. (2010), “Studies on development of electroless Ni-B bath for corrosion resistance and wear resistance applications”, Surf Eng 26(3), pp. 153-158.
[10] Narayanan, T.S.N.S. and Seshadri, S.K. (2004), “Formation and characterization of borohydride reduced electroless nickel deposits”, J Alloys Compd 365(1-2), pp. 197- 205.
[11] Dervos, C.T., Novakovic, J. and Vassiliou, P. (2004), “Vacuum heat treatment of electroless Ni-B coatings”, Mater Lett 58(5), pp. 619-623.
[12] Anik, M., Korpe, E. and Sen, E. (2008), “Effect of coating bath composition on the properties of electroless nickel-boron films”, Surf Coat Technol 202(9), pp. 1718-1727.
[13] Contreras, A., León, C., Jimenez, O., Sosa, E. and Pérez, R. (2006), “Electrochemical behavior and microstructural characterization of 1026 Ni-B coated steel”, Appl Surf Sci 253(2), pp. 592-599.
[14] Taguchi, G. (1990), “Introduction to Quality Engineering”, Asian Productivity Organization, Tokyo.
[15] Ross, P.J. (1996), “Taguchi Techniques for Quality Engineering”, 2nd edn., McGraw Hill, New York.
[16] Roy, R.K. (1990), “A primer on the Taguchi method”, Society of Manufacturing Engineers, Dearborn, Michigan.
[17] Deng, J. (1989), “Introduction to grey system”, Journal of Grey System 1(1), pp. 1-24.
[18] Montgomery, D.C. (2001), “Design and Analysis of Experiments”, Wiley, New York.
[19] Cheong, W.J., Luan, B.L. and Shoesmith, D.W. (2007), “Protective coating on Mg AZ91D alloy - The effect of electroless nickel (EN) bath stabilizers on corrosion behaviour of Ni-P deposit”, Corros Sci 49(4), pp. 1777-1798.
[20] Poorqasemi, E., Abootalebi, O., Peikari, M. and Haqdar, F. (2009), “Investigating accuracy of the Tafel extrapolation method in HCl solutions”, Corros Sci 51, pp. 1043- 1054.
[21] Watanabe, T. and Tanabe, Y. (1976), “Formation and morphology of Ni-B amorphous alloy deposited by electroless plating”, Materials Science and Engineering 23, pp. 97- 100.
[22] Minitab User Manual (2001), “Making data analysis easier”, MINITAB Inc., State College, PA, USA.
[23] Kanta, A.F., Poelman, M., Vitry, V. and Delaunois, F. (2010), “Nickel-boron electrochemical properties investigations”, J Alloys Compd 505, pp. 151-156.
[24] Crobu, M., Scorciapino, A., Elsener, B. and Rossi, A. (2008), “The corrosion resistance of electroless deposited nano-crystalline Ni-P alloys”, Electrochim Acta 53(8), pp. 3364-3370.

comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.