Vinyl Acetate-Acrylic Acid Copolymer for Enhanced Oil Recovery

Gerard T. Caneba, Jay Axland

Department of Chemical Engineering, Michigan Technological University,1400 Townsend Drive, Houghton, MI 49931.

DOI: 10.4236/jmmce.2002.12007                

Abstract

This paper pertains to the possible use of newly-synthesized vinyl acetate/acrylic acid (VA/AA) copolymer to help recover trapped crude oil, an important mineral resource. The proposed approach is to use the copolymer as a foaming surfactant (in water or brine), which will be driven by a gas, such as carbon dioxide or nitrogen. Neutralized forms of the copolymer result in an anionic surfactant, which has been found to have minimal adsorption onto the rock matrix. The neutralized VA/AA copolymers synthesized in this study are found to outperform other anionic surfactants and even more adsorbing nonionic surfactants. Due to the long chain nature of the hydrophilic groups of nonionic surfactants, they are found to produce better foams than anionic ones. Since VA/AA copolymers have long chain hydrophilic groups, it is not surprising that they are good foaming agents as well. Optical microscopy of VA/AA emulsions reveal that they form microscopic network surface structures, which are presumably due to liquid crystalline formation in macromolecular scale.

Keywords

vinyl acetate/acrylic acid, copolymer, Enhanced Oil

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	Obtained from http://www.fe.doe.gov/oil_gas/res_efficiency.shtml
[2]	Caneba, G.T. and Dar, Y., 2002, “Free Radical Retrograde Precipitation Copolymers and Process for making Same”, submitted to U.S. Patent and Trademark Office, January.
[3]	Caneba, G.T., 1992, “Free-Radical Retrograde-Precipitation Polymerization Process”, U.S. Patent No. 5,173,551, December;
[4]	Caneba, G. T., 1992, Adv. Polym. Tech., 11, 277-286;
[5]	Aggarwal, A., R. Saxena, B. Wang, and G. T. Caneba, 1996, J. App. Polym. Sci., 62, 2039-2051;
[6]	Wang, B., Y. Dar, L. Shi, and G. T. Caneba, 1999, J. App. Polym. Sci., 71, 61-74.
[7]	Caneba, G.T., 2002, Proceedings of the American Institute of Chemical Engineers Annual Meeting, Indianapolis, IN, November 3-8.
[8]	Borchardt, J.K., Bright, D.B., Dickson, M.K., and Wellington, S.L., 1988, “Surfactants for Carbon Dioxide Foam Flooding”, in: Surfactant-Based Mobility Control – Progress in Miscible-Flood Enhanced Oil Recovery, D.H. Smith, Ed., ACS Symposium Series, 373, Washington, D.C., Chapter 8.
[9]	“National Energy Policy: Report of the National Energy Policy Development Group”, U.S. Government Printing Office, Washington, D.C., May, 2001, p. x.
[10]	Ibid., Chapter 2.
[11]	Obtained from http://news.ft.com
[12]	Chu, B. and Z. Zhao, 1996, “Nonionic Surfactants”, Nace Vaugn, Ed., Marcel Dekker, NY,pp. 67-143.
[13]	Klins, M.A. and C.P. Bardon, 1991, “Carbon Dioxide Flooding”, in:Basic Concepts in Enhanced Oil Recovery Processes, M. Baviere, Ed., Elsevier Applid Science, New York., pp.215-240.
[14]	Obtained from http://fe.doe.gov/oil_gas_res_efficiency/res_progareas.shtml