Share This Article:

Study on the Luminescence Properties of the Strain Compensated Quantum Well

Full-Text HTML Download Download as PDF (Size:177KB) PP. 40-45
DOI: 10.4236/jcc.2013.17010    3,524 Downloads   4,919 Views   Citations

ABSTRACT

Compared with the conventional strained quantum well, the InGaAs/GaAsP strain compensated quantum well (SCQW) has better optical properties, as the well layer and the barrier layer lattice mismatch with each other which results in the introduction of stress. In this paper, we adopted the Kohn-Luttinger Hamiltonian, conducted some theoretical calculations using the transfer matrix method, and finally verified the following change trend of the InGaAs quantum well following the In-group through experiments: the growth of the low In-group can improve the epitaxial flatness of the active area; the growth of the high In-group can increase the wavelength as well as the strain. In this paper, we adopted the AlGaAs barrier material instead of the GaAsP, made an analysis on the level changes of the compensation quantum well, and successfully fostered the strain compensated quantum well structure using the metal-organic chemical vapor deposition (MOCVD) system which had better optical properties compared with the strained quantum wells.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

Liu, T. , Li, J. , Li, J. , Han, J. , Deng, J. , He, L. and Lin, S. (2013) Study on the Luminescence Properties of the Strain Compensated Quantum Well. Journal of Computer and Communications, 1, 40-45. doi: 10.4236/jcc.2013.17010.

References

[1] J. V. Moloney, J. Hader and S. W. Koch, “Quantum Design of Semiconductor Active Materials Laser and Amplifier Applications,” Laser & Photonics Reviews, Vol. 1, 2007, pp. 24-43. http://dx.doi.org/10.1002/lpor.200610003
[2] J. Hader, J. V. Moloney, M. Fallahi, et al., “Closed-Loop Design of a Semiconductor Laser,” Optics Letters, Vol. 31, No. 22, 2006, pp. 3300-3302. http://dx.doi.org/10.1364/OL.31.003300
[3] H. Toktamis, B. Gonul and M. Oduncuoglu, “Comparative Study of the Band-Offset Ratio of Conventionally Strained and Strain Compensated InGaAs/GaAs QW Lasers,” Physica E, Vol. 24, 2004, pp. 183-186. http://dx.doi.org/10.1016/j.physe.2004.03.020
[4] N. K. Dutta, W. S. Hobson, D. Vakhshoori, et al., “Strain Compensated In-GaAs-GaAsP-InGaP Laser,” IEEE Photonics Technology Letters, Vol. 8, No. 7, 1996, pp. 852-854. http://dx.doi.org/10.1109/68.502248
[5] A. Moser, A. Oosenbrug, E. E. Latta, Th. Forster and M. Gasser, “High-Power Operation of Strained InGaAs/Al- GaAs Single Quantum Well Lasers,” Applied Physics Letters, Vol. 23, 1991, pp. 2642-2644. http://dx.doi.org/10.1063/1.105924
[6] P. K. Bhattacharya, “Semiconductor Optoelectronic Devices,” Pearson Education, US, 1996.
[7] R. M. Kolbas, N. G. Anderson, W. D. Ladig, et al., IIEEE Journal of Quantum Electronics, QE, Vol. 24, No. 8, 1998, p. 1605.
[8] S. L. Chuang, “Physics of Optoelectronic Devices,” Wiley, New York, 1995.
[9] L. A. Coldren and S. W. Corzine, “Diode Lasers and Photonic Integrated Physics,” Wiley, New York, 1995.
[10] S. L. Chuang, “Efficient Band-Structure Calculations of Strained Quantum Wells,” Physical Review, Vol. B43, 1991, pp. 9649-9661.
[11] V. P. Duraev, A. A. Mamalyuk, A. A. Padalitsa, et al., “Effect of GaAsP Barrier Layers on the Parameters of In-GaAs/AlGaAs Laser Diodes Emitting in the 1050~1100 nm Spectral Range,” Quantum Electronics, Vol. 35, No. 10, 2005, pp. 909-911. http://dx.doi.org/10.1070/QE2005v035n10ABEH005742
[12] D. C. Lu and S. K. Duan, “Principles and Applications of Metal Organic Vapor Phase Epitaxy,” Science Press, Beijing, 2009, pp. 160-164. (in Chinese)

  
comments powered by Disqus

Copyright © 2018 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.