Vibration Signals and Condition Monitoring for Wind Turbines

Dimitrios Koulocheris, Georgios Gyparakis, Andonios Stathis, Theodore Costopoulos

School of Mechanical Engineering, National Technical University of Athens, Athens, Greece.

DOI: 10.4236/eng.2013.512116                

Abstract

Rolling element bearings are critical parts of modern wind turbines as they carry the loads of the turning structure and the wind force. The stochastic nature of the wind loads makes it difficult to estimate the useful operational life of the bearings. Condition monitoring of these bearings in a real time environment could be very helpful in estimating their performance and in scheduling maintenance actions when a condition-based maintenance strategy is followed. This procedure can be successfully implemented by using vibration analysis in the time domain or in the frequency domain, giving useful results about the current condition of bearings and the location of potential faults. Permanently located transducers on proper positions on the bearings’ housings can be used in order to collect, process and evaluate real time measurements and provide information about the bearing’s performance. In this work, a test rig is utilized in order to evaluate the performance of rolling bearings. The results of the experimentation are satisfactory and the progress of fatigue failures can be predicted through vibration analysis techniques showing that implementation in real scale may be useful.

Keywords

Wind Turbines; Bearings; Basic Rating Life; Maintenance; Condition Monitoring; Vibration Signals

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	X. Chiementin, F. Bolaers, L. Rasolofondraibe and J.-P. Dron, “Localization and Quantification of Vibratory Sources: Application to the Predictive Maintenance of Rolling Bearings,” Journal of Sound and Vibration, Vol. 316, No. 1-5, 2008, pp. 331-347. http://dx.doi.org/10.1016/j.jsv.2008.02.029
[2]	K. Debray, F. Bogard and Y. Q. Guo, “Numerical Vibration Analysis on Defect Detection in Revolving Machines Using Two Bearing Models,” Archive of Applied Mechanics, Vol. 74, No. 1-2, 2004, pp. 45-58. http://dx.doi.org/10.1007/s00419-004-0327-8
[3]	Z. Kiral and H. Karagulle, “Vibration Analysis of Rolling Element Bearings with Various Defects under the Action of an Unbalanced Force,” Mechanical Systems and Signal Processing, Vol. 20, No. 8, 2006, pp. 1967-1991. http://dx.doi.org/10.1016/j.ymssp.2005.05.001
[4]	H. Qiu, J. Lee, J. Lin and G. Yu, “Robust Performance Degradation Assessment Methods for Enhanced Rolling Element Bearings Prognostics,” Advanced Engineering Informatics, Vol. 40, No. 3-4, 2004, pp. 1-14. http://dx.doi.org/10.1016/j.aei.2004.08.001
[5]	J.-P. Dron, L. Rasolofondraibe, X. Chiementin and F. Bolaers, “A Comparative Experimental Study on the Use of Three Denoising Methods for Bearing Defect Detection,” Meccanica, Vol. 45, No. 2, 2010, pp. 265-277. http://dx.doi.org/10.1007/s11012-009-9243-x
[6]	A. Djebala, N. Ouelaa and N. Hamzaoui, “Detection of Rolling Bearing Defects Using Discrete Wavelet Analysis,” Meccanica, Vol. 43, No. 3, 2008, pp. 339-348. http://dx.doi.org/10.1007/s11012-007-9098-y
[7]	Y. Ming, J. Chen and G. Dong, “Weak Fault Feature Extraction of Rolling Bearing Based on Cyclic Wiener Filter and Envelope Spectrum,” Mechanical Systems and Signal Processing, Vol. 25, No. 5, 2011, pp. 1773-1785. http://dx.doi.org/10.1016/j.ymssp.2010.12.002
[8]	T. Karacay and N. Akturk, “Experimental Diagnostics of Ball Bearings Using Statistical and Spectral Methods,” Tribology International, Vol. 42, No. 6, 2009, pp. 836843. http://dx.doi.org/10.1016/j.triboint.2008.11.003
[9]	X. Niu, L. Zhu and H. Ding, “New Statistical Moments for the Detection of Defects in Rolling Element Bearings,” International Journal of Manufacturing Technology, Vol. 26, No. 11-12, 2005, pp. 1268-1274. http://dx.doi.org/10.1007/s00170-004-2109-4
[10]	I. Zotos and Th. Costopoulos, “On the Use of Rolling Element Bearings Models in Precision Maintenance,” American Journal of Engineering and Applied Science, Vol. 4, No. 2, 2009, pp. 344-352. http://dx.doi.org/10.3844/ajeassp.2009.344.352
[11]	M. S. Patil, J. Mathew, P. K. Rajendrakumar and S. Desai, “A Theoretical Model to Predict the Effect of Localized Defect on Vibrations Associated with Ball Bearing,” International Journal of Mechanical Sciences, Vol. 52, No. 9, 2010, pp. 1193-1201. http://dx.doi.org/10.1016/j.ijmecsci.2010.05.005
[12]	R. B. Randall and J. Antoni, “Rolling Element Bearing Diagnostics—A Tutorial,” Mechanical Systems and Signal Processing, Vol. 25, No. 2, 2011, pp. 485-520. http://dx.doi.org/10.1016/j.ymssp.2010.07.017
[13]	V. Sugumaran and K. I. Ramachandran, “Fault Diagnosis of Roller Bearing Using Fuzzy Classifier and Histogram Features with Focus on Automatic Rule Learning,” Expert Systems with Applications, Vol. 38, No. 5, 2011, pp. 4901-4907. http://dx.doi.org/10.1016/j.eswa.2010.09.089
[14]	K. Raptis, G. Papadopoulos, Th. Costopoulos and A. Tsolakis, “Experimental Study of Load Sharing in RollerBearing Contact by Caustics and Photoelasticity,” American Journal of Engineering and Applied Sciences, Vol. 4, No. 2, 2011, pp. 294-300. http://dx.doi.org/10.3844/ajeassp.2011.294.300
[15]	I. Zotos nd Th. Costopoulos, “A Study on the Increase of Numerical Stability and Accuracy of the Transfer Matrix Method,” Journal of Mathematics and Statistics, Vol. 4, No. 4, 2008, pp. 208-212.
[16]	Y. Lei, Z. He and Y. Zi, “A New Approach to Intelligent Fault Diagnosis of Rotating Machinery,” Expert Systems with Applications, Vol. 35, No. 4, 2008, pp. 1593-1600. http://dx.doi.org/10.1016/j.eswa.2007.08.072
[17]	H. Wang and P. Chen, “Intelligent Diagnosis Method for Rolling Element Bearing Faults Using Possibility Theory and Neural Network,” Computers & Industrial Engineering, Vol. 60, No. 4, 2011, pp. 511-518. http://dx.doi.org/10.1016/j.cie.2010.12.004
[18]	P. K. Kankar, S. C. Sharma and S. P. Harsha, “Fault Diagnosis of Ball Bearings Using Machine Learning Methods,” Expert Systems with Applications, Vol. 38, No. 3, 2011, pp. 1876-1886. http://dx.doi.org/10.1016/j.eswa.2010.07.119
[19]	P. K. Kankar, S. C. Sharma and S. P. Harsha, “Fault Diagnosis of Ball Bearings Using Continuous Wavelet Transform,” Applied Soft Computing, Vol. 11, No. 2, 2011, pp. 2300-2312. http://dx.doi.org/10.1016/j.asoc.2010.08.011
[20]	B. Kilundu, P. Dehombreux and C. Letot, “Early Detection of Bearing Damage by Means of Decision Trees,” Journal of Automation, Mobile Robotics & Intelligent Systems, Vol. 3, No. 3, 2009, pp. 70-74.
[21]	P. Stepanic, I. V. Latinovic and Z. Djur, “A New Approach to Detection of Defects in Rolling Element Bearings Based on Statistical Pattern Recognition,” International Journal of Advanced Manufacturing Technology, Vol. 45, No. 1-2, 2009, pp. 91-100. http://dx.doi.org/10.1007/s00170-009-1953-7
[22]	T. I. Liu, J. H. Singonahalli and N. R. Iyer, “Detection of Roller Bearing Defects Using Expert System and Fuzzy Logic,” Mechanical Systems and Signal Processing, Vol. 10, No. 5, 1996, pp. 595-614. http://dx.doi.org/10.1006/mssp.1996.0041