Amalgamated-signal Cymometer Based on TMS320F28335 ()
Abstract
In our design, an amalgamated-signal cymometer is
developed with a TMS320F28335
DSP chip ---- we use its on-chip 12-bit 16-channel AD to conduct a novel
dual-sequencer synchronize sampling and averaged to improve the accuracy.
Considering the algorithm, we use TI's C28x_FPU_Lib to conduct a FFT with
sampled results and correct spectrum with Time-Shift Phase Difference
Correcting Spectrum Method based on
all-phase spectral analysis. Namely, we design a sampling-frequency
self-adaption algorithm which makes operation keep on without outside-hardware
command. Actually, the test result shows that our design's frequency resolution
ratio is up to 0.4%, and the maximum frequency’s D-value between main and minor
signal is up to 29.99 kHz.
Share and Cite:
Z. Xu, W. Lv and Z. Li, "Amalgamated-signal Cymometer Based on TMS320F28335,"
Energy and Power Engineering, Vol. 5 No. 4B, 2013, pp. 1226-1229. doi:
10.4236/epe.2013.54B232.
Conflicts of Interest
The authors declare no conflicts of interest.
References
[1]
|
K. J. Xu, “Theory and Application of TMS320X281X DSP,” Beijing University of Aeronautics and Astronautics Press, 2006.
|
[2]
|
K. Ding, “Discrete Spectrum Correction Theory and Technology,” Science Press, 2007.
|
[3]
|
RIFEDG, VINCENTGA. Use of the discrete fourier transform in the measurement of levels and tones[ J]. Bell Syst. Tech. J. , 1970, 49( 2): 197- 228.
|
[4]
|
Z. H. Wang, “Digital Signal All Phase Spectrum Analysis and Filtering Technology,” Electronic Industry Press, 2009.
|
[5]
|
“TMS320F28335 Data Manual,” Texas Instruments.
|
[6]
|
G. Z. Zhao, “Signal Analysis and Processing,” Mechanical Industry Press, 2005.
|
[7]
|
Z. Z. Li, “Digital Signal Processing and Application with MATLAB,” Tsinghua University Press, 2008.
|
[8]
|
“Assembly Good Paper of C2000 Grand Prix of TI C2000 Senior Embedded Controlled in 2008,” Electronic Industry Press, 2008.
|