The Polymeric Heterogemeous Matrix for Carbon and Glass Reinforced Plastic ()
Galina Malysheva,
Lianhe Liu,
Xiao Ouyang,
Oleg Kulakov
Department of Material Science and Chemical Engineering, Harbin Engineering University, Harbin, China.
Department of Special Machinery, Bauman Moscow State Technical University, Moscow, Russia.
Qingdao Advanced Marine Material Technology Co., Ltd, Qingdao, China.
DOI: 10.4236/msce.2013.15005
PDF
HTML
3,183
Downloads
5,095
Views
Citations
Abstract
This article presents the results of
deformation-strength properties measurement and microstructural analysis of
heterogeneous polymer matrix consisting of thermoset and thermoplastic
polymers. Thermosetting material is a diamino-diphenil sulfon-cured
epoxy oligomer. Polysulfone was used as thermoplastic material. Two different
technological processes were used to obtain heterogeneous polymer matrix: the material
was mixed in the block, or layered material was produced in which a layer of
thermoplastic material alternated with a layer of epoxy oligomer.
Share and Cite:
Malysheva, G. , Liu, L. , Ouyang, X. and Kulakov, O. (2013) The Polymeric Heterogemeous Matrix for Carbon and Glass Reinforced Plastic.
Journal of Materials Science and Chemical Engineering,
1, 23-27. doi:
10.4236/msce.2013.15005.
Conflicts of Interest
The authors declare no conflicts of interest.
References
|
[1]
|
A. Muranov, G. Malysheva and A. Pilyugina, “The Polymeric Heterogeneous matrix for Composites,” ACM-TAA-2012, Werxham, 2012.
|
|
[2]
|
M. Kerber and I. Gorbunova, “Binders for Polymeric Composite Materials,” Plastics, No. 12, 2010, pp. 14-21.
|