Macroscopic Structural Analysis on a 10 kW Class Lab-Scale Process Heat Exchanger Prototype under a High-Temperature Gas Loop Condition

Kee-Nam Song, Sung-Deok Hong, Hong-Yoon Park

.

DOI: 10.4236/eng.2013.51A017                

Abstract

A PHE (Process Heat Exchanger) is a key component in transferring high-temperature heat generated from a VHTR (Very High Temperature Reactor) to a chemical reaction for the massive production of hydrogen. Last year, a 10 kW class lab-scale PHE prototype made of Hastelloy-X was manufactured at the Korea Atomic Energy Research Institute (KAERI), and a performance test of the PHE prototype is currently underway in a small-scale nitrogen gas loop at KAERI. The PHE prototype is composed of two kinds of flow plates: grooves 1.0 mm in diameter machined into the flow plate for the primary coolant, and waved channels bent into the flow plate for the secondary coolant. Inside the 10 kW class lab-scale PHE prototype, twenty flow plates for the primary and secondary coolants are stacked in turn. In this study, to understand the macroscopic structural behavior of the PHE prototype under the steady-state operating condition of the gas loop, high-temperature structural analyses on the 10 kW class lab-scale PHE prototype were performed for two extreme cases: in the event of contacting the flow plates together, and when not contacting them. The analysis results for the extreme cases were also compared.

Keywords

Process Heat Exchanger; Very High Temperature Reactor; High-Temperature Structural Analysis; Nuclear Hydrogen

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	W. J. Lee, Y. W. Kim and J. H. Chang, “Perspectives of Nuclear Heat and Hydrogen,” Nuclear Engineering and Technology, Vol. 41, No. 4, 2009, pp. 413-426. doi:10.5516/NET.2009.41.4.413
[2]	US DOE, “Financial Assistance Funding Opportunity Announcement,” Next Generation Nuclear Plant ProgramGas Cooled, US DOE Idaho Operation Office, 2009.
[3]	AREVA, “NGNP with Hydrogen Production Pre-Conceptual Design Studies Report,” Doc. No. 1209052076000, AREVA, Seattle, 2007.
[4]	L. C. Brown, G. E. Besenbruch, R. D. Lentsch, K. R. Schultz, J. F. Funk, P. S. Pickard, A. C. Marshall and S. K. Showalter, “High Efficiency Generation of Hydrogen Using Nuclear Power,” GA-A24285, General Atomics, San Diego, 2003.
[5]	J. H. Chang, et al., “A Study of a Nuclear Hydrogen Production Demonstration Plant,” Nuclear Engineering and Technology, Vol. 39, No. 2, 2007, pp. 111-122. doi:10.5516/NET.2007.39.2.111
[6]	Y. J. Shin, et al., “A Dynamic Simulation of the Sulfuric Acid Decomposion Process in a Sulfur-Iodine Nuclear Hydrogen Production Plant,” Nuclear Engineering and Technology, Vol. 41, No. 6, 2009, pp. 831-840. doi:10.5516/NET.2009.41.6.831
[7]	Y. W. Kim, “High Temprature and High Pressure Corrosion Resistant Process Heat Exchanger for a Nuclear Hydrogen Production System,” Korea Patent No.0877574, 2008.
[8]	K. N. Song, S. D. Hong and H. Y. Park, “High-Temperature Structural Analysis of a Small-Scale PHE Prototype under the Test Condition of a Small-Scale Gas Loop,” Science and Technology of Nuclear Installations, Vol. 2012, 2012, Article ID: 312080. doi:10.1155/2012/312080
[9]	HAYNES International, “Hastelloy-X Alloy,” 2012. http://www.haynesintl.com/pdf/h3009.pdf
[10]	“Siemens PLM Software I-DEAS/TMG User Manual Version 6.1,” Plano, 2009.
[11]	“Dassault Systemes Simulia ABAQUS User Manual Version 6.8,” Waltham, 2009.
[12]	K. N. Song, S. D. Hong and H. Y. Park, “High-Temperature Structural Analysis on a Medium-Scale Process Heat Exchanger,” Transactions of the Korean Society of Mechanical Engineers-A, Vol. 36, No. 10, 2012, in Press.
[13]	K. N. Song, S. D. Hong and H. Y. Park, “High-Temperature Structural Analysis of a Small-Scale Process Heat Exchanger (III),” Transactions of the Korean Society of Mechanical Engineers-A, Vol. 35, No. 2, 2011, pp. 191-200. doi:10.3795/KSME-A.2011.35.2.191