The Microstructure and Oxidation Resistance of The Microstructure and Oxidation Resistance of Slurry Method on Rene 80 Superalloy

DOI: 10.4236/jmmce.2012.117058   PDF   HTML     7,126 Downloads   12,110 Views   Citations

Abstract

The slurry method is one of the oldest techniques of deposition of aluminide coating on the nickel superalloy, titanium alloys and steel. It is characterized by relatively low costs of its realisation and necessary equipment. This method en-ables a simple modification of chemical composition of the coating through addition of different powders. The author showed study on the possibility of modification of the Al-Si slurry chemical composition used for aluminide coating deposition by addition of MeCrAlY powder. The slurry was deposited by immersion than the diffusion treatment at 950℃ for two hours was applied. The thickness of obtained coatings was in the range of 30 - 65 μm.

Share and Cite:

M. Goral, "The Microstructure and Oxidation Resistance of The Microstructure and Oxidation Resistance of Slurry Method on Rene 80 Superalloy," Journal of Minerals and Materials Characterization and Engineering, Vol. 11 No. 7, 2012, pp. 719-723. doi: 10.4236/jmmce.2012.117058.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] Y. Tamarin, Protective Coatings for Turbine Blades, ASM International, 2002
[2] Z. D. Xiang, J. S. Burnell-Gray, P. K. Datta, Journal of Materials Science, vol. 36, 2001, pp. 5673 – 5682
[3] Squillace A., Bonetti R., Archer N.J., Yeatman J.A., Surface and Coatings Technology, vol. 120–121, 1999., pp 118–123
[4] J. A. Haynes, M. J. Lance, B. A. Pint, I. G. Wright, Surface & Coatings Technology, vol. 146-147 (2001), pp. 140-146
[5] M. J. Li X. F. Sun, H. R. Guan, X. Jiang, Z. Q. Hu, Oxidation of Metals, Vol. 59, Nos. 5/6, June 2003, pp 483-502
[6] J. Angenete, K. Stiller, Surface and Coatings Technology, vol. 150, (2002), pp. 107–118.
[7] T. Kircher; B.G. McMordie, S. Shankar; S., Slurry compositions for diffusion coatings, US Patent, Praxair no. 6,444,054, year; 2000
[8] Information materials from Ceral USA company, www.ceralusa.com
[9] M. Góral, L. Swadzba, Modification of aluminide coatings by slurry method on Ni-Superalloys, Corrosion protection (in Polish), no 4-5, 2007, pp.120-123
[10] A. Haynes, B.L. Armstrong, S. Dryepondt, Y. Zhang, proceeding of ICMCTF 2011 conference, San Diego, USA
[11] M. Goral, L. Swadzba, G. Moskal, M. Hetmanczyk, T. Tetsui, Intermetallics Volume: 17, Issue: 11, November, 2009, pp. 965-967.

  
comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.