Thermal Analysis of the Impact of RT Storage Time on the Strengthening of an Al-Mg-Si Alloy

A. Hayoune

Nuclear Research Centre of Birine OB 180, Ain Oussera 17200, Djelfa, Algeria.

DOI: 10.4236/msa.2012.37065                

Abstract

Despite the large number of papers dealing with the Al -Mg-Si system, the decomposition of the supersaturated solid solutions during the different aging treatments and therefore, the related hardening is still under debate. In the present work, by the use of simple techniques such as the Differential Scanning Calorimetry (DSC), Microhardness measurements and X-Ray Diffraction (XRD) analysis the precipitation behaviour and the impact of prior natural aging after homogenization on the subsequent microstructural and mechanical evolutions during artificial heat treatment at 160℃, of nuclear aluminium alloy Al-1.32% Mg-0.53% Si (% wt.) alloy, were identified. Through DSC, lattice parameter and microhardness measurements, the precipitation sequence were indirectly identified to be as follows: supersaturated solid solution (S.S.S.) → atomic clusters and GP zones →β” →β’ →β. The evolution of the mechanical properties during natural aging has been explained to be due to GP zones and atomic clusters formation. Storage at RT was found to have an important effect on the mechanical properties of the studied alloy. Under the light of the DSC results, this effect was explained by a slower precipitation kinetics of the β” phase; the atomic clusters and GP zones, which formed during storage at RT and the low concentration of the quenched-in vacancies in the stored samples have a delaying effect upon the nucleation of β” phase. Consequently, the final microstructure developed in these samples is coarse; hence lower mechanical properties are obtained.

Keywords

Al-Mg-Si Alloy; Precipitation; DSC; Natural Aging; Microhardness

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	V. M. Lebedev, V. T. Lebedev, I. N. Ivanova, S. P. Orlov and D. N. Orlova, “Structure of Aluminum Alloys Irradi- ated with Reactor Neutrons,” Physics of the Solid State, Vol. 52, No. 5, 2010, pp. 996-999. doi:10.1134/S1063783410050239
[2]	J. V. De Langkruis, M. S. Vossenberg, W. H. Kool and S. Van der Zwaag, “A Study on the ?’ and ?” Formation Kinetics in AA6063 Using Differential Scanning Calo- rimetry,” Journal of Materials Engineering and Perfor- mance, Vol. 12, No. 4, 2003, pp. 408-413.
[3]	O. Myhr, ?. Grong and K. O. Pedersen, “A Combined Precipitation, Yield Strength and Work Hardening Model for Al-Mg-Si Alloys,” Metallurgical and Materials Trans- actions A, Vol. 41, No. 9, 2010, pp. 2276-2289. doi:10.1007/s11661-010-0258-7
[4]	D. G. Eskin, V. Massardier and P. Merle, “A Study of High-Temperature Precipitation in Al-Mg-Si Alloys with an Excess of Silicon,” Journal of Materials Science, Vol. 34, No. 4, 1999, pp. 811-820. doi:10.1023/A:1004585216084
[5]	K. Fukui, M. Takeda and T. Endo, “The Metastable Phase Responsible for Peak Hardness in the Ageing Tempera- ture Range 403 - 483 K for an Al-Mg-Si Ternary Alloy,” Journal of Materials Science, Vol. 40, No. 2, 2005, pp. 3317-3320. doi:10.1007/s10853-005-2710-4
[6]	C. D. Mariora, S. J. Andersen, H. W. Zandbergen and R. Holmestad, “The Influence of Alloy Composition on Pre- cipitates of the Al-Mg-Si System,” Metallurgical and Materials Transactions A, Vol. 36, No. 3, 2005, pp. 691- 702. doi:10.1007/s11661-005-0185-1
[7]	R. S. Yassar, M. Cai, D. P. Field, X. Chen and J. Asay, “The Effect of Shock-Loading on the Aging Behavior of an Al-Mg-Si Alloy,” Journal of Materials Science, Vol. 41, No. 6, 2006, pp. 1711-1720. doi:10.1007/s10853-006-2933-z
[8]	M. Takeda, F. Ohkubo, T. Shirai and K. Fukui, “Stability of Metastable Phases and Microstructures in the Ageing Process of Al-Mg-Si Ternary Alloys,” Journal of Materi- als Science, Vol. 33, No. 9, 1998, pp. 2385-2390. doi:10.1023/A:1004355824857
[9]	L. Zhen, W. D. Fei, S. B. Kang and H. W. Kim, “Precipi- tation Behaviour of Al-Mg-Si Alloys with High Silicon Content,” Journal of Materials Science, Vol. 32, No. 7, 1997, pp. 1895-1902. doi:10.1023/A:1018569226499
[10]	R. C. Dorward, “Preaging Effects in AI-Mg-Si Alloys Con- taining 0.6 to 0.9 Pct Mg2Si,” Metallurgical and Materi- als Transactions B, Vol. 4, No. 2, 1973, pp. 507-512. doi:10.1007/BF02648703
[11]	C. D. Mariora, H. Nordmark, S. J. Andersen and R. Holm- estad, “Post-β’’ Phases and Their Influence on Micro- structure and Hardness in 6xxx Al-Mg-Si Alloys,” Journal of Materials Science, Vol. 41, No. 2, 2006, pp. 471- 478. doi:10.1007/s10853-005-2470-1
[12]	C. S. T. Chang and J. Banhart, “Low-Temperature Dif- ferential Scanning Calorimetry of an Al-Mg-Si Alloy,” Metallurgical and Materials Transactions A, Vol. 42, No. 7, 2011, pp. 1960-1964. doi:10.1007/s11661-010-0596-5
[13]	K. D. Woo, J. S. Lee and S. W. Kim, “Calorimetric In- vestigation of Precipitation Kinetics in AI-Mg-Si-X(Cr, Be) Alloys,” Metals and Materials International, Vol. 5, No. 4, 1999, pp. 363-368.
[14]	M. Vedani, G. Angella, P. Bassani, D. Ripamonti and A. Tuissi, “DSC Analysis of Strengthening Precipitates in Ultrafine Al-Mg-Si Alloys,” Journal of Thermal Analysis and Calorimetry, Vol. 87, No. 1, 2007, pp. 277-284. doi:10.1007/s10973-006-7837-2
[15]	Y. Birol, “DSC Analysis of the Precipitation Reaction in AA6005 Alloy,” Journal of Thermal Analysis and Calo- rimetry, Vol. 93, No. 3, 2008, pp. 977-981. doi:10.1007/s10973-007-8686-3
[16]	A. Hayoune and D. Hamana, “Structural Evolution during Non-Isothermal Ageing of a Dilute Al-Cu Alloy by Dila- tometric Analysis,” Journal of Alloys and Compounds, Vol. 474, No. 1-2, 2009, pp. 118-123. doi:10.1016/j.jallcom.2008.06.070
[17]	A. Hayoune and D. Hamana, “A Dilatometric and High- Temperature X-Ray Diffraction Study of Cold Deformation Effect on the Interaction between Precipitation, Recovery and Recrystallization Reactions in Al-12 wt.% Mg Alloy,” Materials Science and Engineering: A, Vol. 527, No. 27-28, 2010, pp. 7261-7264. doi:10.1016/j.msea.2010.08.011
[18]	G. W. Smith, W. J. Baxter and R. K. Mishra, “Precipita- tion in 339 and 2124 Aluminum: A Caveat for Calo- rimetry,” Journal of Materials Science, Vol. 35, No. 15, 2000, pp. 3871-3880. doi:10.1023/A:1004837615783
[19]	G. A. Edwards, K. Stiller, G. L. Dunlop and M. J. Couper, “The Precipitation Sequence in Al-Mg-Si Alloys,” Acta Materialia, Vol. 46, No. 11, 1998, pp. 3893-3904. doi:10.1016/S1359-6454(98)00059-7
[20]	C. D. Marioara, S. J. Andersen, J. Jansen and H. W. Zandbergen, “The Influence of Temperature and Storage Time at RT on Nucleation of the β” Phase in a 6082 Al-Mg-Si Alloy,” Acta Materialia, Vol. 51, No. 3, 2003, 789-796. doi:10.1016/S1359-6454(02)00470-6