Development of Fibre Reinforced Cementitious Composite for Ceiling Application

I.O. Oladele, A.D. Akinwekomi, S. Aribo, A.K. Aladenika

2Department of Science Laboratory Technology Rufus Giwa polytechnic Owo, Ondo State,Nigeria.
Department of Metallurgical and Materials Engineering, Federal University of Technology,Akure, Ondo State, Nigeria..

DOI: 10.4236/jmmce.2009.88051                

Abstract

Natural sponge fibre (Acanthus montanus) was used as reinforcement for ceiling materials in this research work. This fibre, being fairly strong and stiff as well as cheap and plentiful with low energy demand during manufacture, are strong contenders for the reinforcement of cementbased materials. The fibre, whose mass fraction was the variable in this work, was cut down into smaller sizes and mixed with pulverised waste paper, cement and water. The resulting slurry was then poured into rectangular moulds which were compacted until the excess water was expelled and resulting composites became hard. Demoulded samples were left to cure in the open laboratory air for 28 days. Flexural and water absorptivity tests were carried out on the various samples which showed that reinforcement and best mechanical properties were obtained at optimum fibre mass fraction of 4% when compared with the brittle matrix in the absence of reinforcement. These tests confirmed the possible use of sponge fibres as reinforcement in cement matrices for ceiling purposes.

Keywords

Natural sponge fibres, mass fraction, flexural test and water absorptivity test.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	Swamy, R.N. (1990), Vegetable Fibre Reinforced Cement Composites- A False Dream or a Potential Reality, Proceedings of Second International RILEM Symposium ,1st edition, Chapman & Hall, London (ed. H.S Sobral), pp. 3-8.
[2]	Benjamin ,C.T. (1990), Fabrication and Performance of Natural Fiber-Reinforced Composite Materials”, 35th. International SAMPE Symposium, pp.970-978.
[3]	Al-Qureshi H.A .(1999), The Use of Banana Fibre Reinforced Composites for the Development of a Truck Body, Second International Wood and Natural Fibre Composites Symposium, Kassel/Germany, pp.1-8.
[4]	Brandt, A.M. (1995), Cement Based Composites: Materials, Mechanical Properties and Performance, 1st edition, Chapman and Hall, London, pp. 5-60, 77-97.
[5]	Soroushian, P and Mankunte, S (1990), High Performance Fibre Reinforced Cement Composites, (eds. H.W. Reinhardt and A.E. Naaman), E and FN Son, London, pp. 84- 99.
[6]	Hussin, M.W. and Zakaria, F. (1990), Prospects For Coconut Fibre- Reinforced Thin Cement Sheet in the Malaysian Construction Industry, Proceedings of the Second International RILEM Symposium,1st edition, Chapman & Hall, London (ed. H.S Sobral), pp. 77-80.
[7]	Lasisi, F and Ogunjimi, B. (1984), Source and Mix Proportions as Factors in Characteristic Strength of Laterized Concrete, International Journal for Development Technology, 2:3, pp. 8-13.