Share This Article:

A Thermo-Mechanical Behavior Simulation of A NiTi Staple Used for the Correction of Idiopathic Scoliosis

Abstract Full-Text HTML Download Download as PDF (Size:1105KB) PP. 61-69
DOI: 10.4236/jbnb.2012.31008    4,257 Downloads   7,638 Views   Citations


In order to treat scoliosis, a thermo-mechanical behavior study of shape memory alloy bone staple has been proposed. A pre-stretched shape-memory-alloy bone staple, which has been heated above the transition temperature, provides greater compressive force upon insertion between two vertebrae and allows the control of idiopathic scoliosis development. Until now, the optimal design has not been reached due to the lack of appropriate design tools for shape memory alloy devices. In this paper, a shape memory alloy bone staple model is proposed by developing a user subroutine UMAT based on Boyd et al. unified thermodynamic shape memory alloy constitutive law using the finite element analysis software, ABAQUS. The numerical results for superelastic and shape memory effect under the tensile and three-point bending tests are presented. Simulations of the shape memory effects and force generation of the shape memory alloy staple are also shown.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

F. Hatira and K. Saidane, "A Thermo-Mechanical Behavior Simulation of A NiTi Staple Used for the Correction of Idiopathic Scoliosis," Journal of Biomaterials and Nanobiotechnology, Vol. 3 No. 1, 2012, pp. 61-69. doi: 10.4236/jbnb.2012.31008.


[1] J. G. Boyd and D. C. Lagoudas, “A Thermodynamical Constitutive Model for Shape Memory Materials. Part1. The Monolithic Shape Memory Alloy,” International Journal of Plasticity, Vol. 2, No. 6, 1996, pp. 805-842. doi:10.1016/S0749-6419(96)00030-7
[2] E. Patoor, “Les Alliages a Mémoire de Forme, ” Hermes-Paris, Paris, 1990.
[3] X. D. Zhang, C. A. Rogers and C. Liang, “Modeling of the Two Way Shape Memory Effect,” Journal of Intelligent Material System and Structures, Vol. 80, No. 4, 1997, pp. 353-362.
[4] C.-Y. Chang, D. Vokoun and C.-T. Hu, “Two-Way Shape Memory Effect of NiTi Alloy Induced by Constraint Aging Treatment at Room Temperature,” Metallurgical and Materials Transactions A, Vol. 32, No. 7, 2001, pp. 1629- 1634. doi:10.1007/s11661-001-0141-7
[5] Z. Bo, D.C. Lagoudas and D. Miller, “Material Characterization of SMA Actuators under Non Proportional Thermomechanical Loading,” Journal of Engineering Material & Technology, Vol. 31, No. 1, 1998, pp. 75-85.
[6] F. Trochu and Y. Y. Qian, “Non Linear Finite Element Simulation of Superelastic Shape Memory Alloy Parts I,” Computer & Structures, Vol. 62, No. 5, 1997, pp. 799-810. doi:10.1016/S0045-7949(96)00288-X
[7] F. Trochu and P. Therriaul, “Non Linear Modeling of Hysteretic Laws by Dual Kriging and Application,” Computer Methods in Applied Mechanics and Engineering, Vol. 151, No. 3-4, 1998, pp. 545-558. doi:10.1016/S0045-7825(97)00165-5
[8] F. Auricchio and E. Sacco, “One Dimensional Model for Superelastic Shape Memory Alloys with Different Elastic Properties between Austenite and Martensite,” International Journal of Non-Linear Mechanics, Vol. 32, No. 6, 1997, pp. 1101-1114. doi:10.1016/S0020-7462(96)00130-8
[9] F. Auricchio and E. Sacco, “A SMA Thermomechanical Finite Element Beam Model,” The International Organization on Shape Memory and Superelastic Technologies, Materials Park, 1997.
[10] F. Auricchio, “A Robust Integration Algorithm for a Finite Strain Shape Memory Alloy Superelastic Model,” Journal of Plasticity, Vol. 17, No. 7, 2001, pp. 971-990. doi:10.1016/S0749-6419(00)00050-4
[11] M. A. Qidwai, P. B. Entchev, D. C. Lagoudas and V. G. DeGiorgi, “Modeling of the Thermomechanical Behavior of Porous Shape Memory Alloys,” International Journal of Solids and Structures, Vol. 38, No. 48-49, 2001, pp. 8653-8671. doi:10.1016/S0020-7683(01)00118-4
[12] J. G. Boyd and D. C. Lagoudas, “A Thermodynamical Constitutive Model for Shape Memory Materials. Part 2. The SMA Composite Material,” International Journal of Plasticity, Vol. 12, No. 7, 1996, pp. 843-873. doi:10.1016/S0749-6419(96)00031-9
[13] D. A. Hodgson, “Using Shape Memory Alloys,” Shape Memory Applications, Sunnyvale, 1988.
[14] M. A. Schmerling, M. A.Wilkov and M. D. Sanders, “Proposed Medical Application of Shape Memory Effect,” In: A NiTi Harrington Rod for the Treatment of Scoliosis, Shape Memory Effects in Alloy, Plenum Press, New York, 1975, pp. 563-574.
[15] V. Birman, “Review of Mechanics of Shape Memory Alloy Structures,” Applied Mechanics Reviews, Vol. 50, No. 11, 1997, pp. 629-645. doi:10.1115/1.3101674
[16] K. Tanaka, “A Thermomechanical Sketch of Shape Mem- ory Effect: One-Dimensional Tensile Behavior,” Res Mechanica, Vol. 2, No. 3, 1986, pp. 59-72.
[17] C. Liang and C. Rogers, “A Multi Dimensional Constitutive Model for Shape Memory Alloys,” Journal of Engineering Mathematics, Vol. 26, No. 3, 1992, pp. 429-443. doi:10.1007/BF00042744
[18] D. C. Lagoudas, Z. Bo and M. A. Qidwai, “A Unified Thermodynamic Constitutive Model for SMA and Finite Element Analysis of Active Metal Matrix Composites,” Mechanics of Composite Materials and Structures, Vol. 3, No. 2, 1996, pp. 153-179. doi:10.1002/(SICI)1234-986X(199606)3:2<153::AID-MCM36>3.3.CO;2-J
[19] F. Auricchio and E. Sacco, “A Temperature Depend Beam for Shape Memory Alloys: Constitutive Modeling, Finite Element Implementation and Numerical Simulation,” Computational Methods in Applied Mechanics & Engineering, Vol. 174, No. 1-2, 1999, pp. 171-190,.
[20] F. Auricchio and E. Sacco, “Thermo-Mechanical Modeling of a Superelastic Shape-Memory Wire under Cyclic Strenching-Bending Loading,” International Journal of Solids and Structures, Vol. 38, No. 34-35, 2001, pp. 6123- 6145.
[21] F. Auricchio, R. L. Taylor and J. Lubliner, “Shape Memory Alloys Macromodeling and Numerical Simulations of the Finite Strain Superelastic Behaviour,” Computer Methods in Applied Mechanics and Engineering, Vol. 146, No. 3-4, 1997, pp. 281-312. doi:10.1016/S0045-7825(96)01232-7
[22] F. Auricchio and R. L. Taylor, “A Return-Map Algorithm for General Associative Isotropic Elasto-Plastic Materials in Large Deformation Regime,” International Journal of Plasticity, Vol. 15, No. 12, 1999, pp. 1359-1378. doi:10.1016/S0749-6419(99)00044-3
[23] E. Patoor and M. Berveiller, “Technologie Des Alliages A Mémoire De Forme, ” Hermes-Paris, Paris, 1994.
[24] L. C. Brinson and M. S. Huang, “Simplifications and Comparisons of Shape Memory Alloy Constitutive Models,” Journal of Intelligent Material Systems and Structures, Vol. 7, No. 1, 1996, pp. 108-114. doi:10.1177/1045389X9600700112
[25] C. Lexcellent, B. C. Goo, Q. P. Sun and J. Bernardini, “Characterization Thermomechanical Behavior and Micromechanical Based Constitutive Model of Shape Memory Cu Zn Ni Single Crystal,” Acta Materialia, Vol. 44, No. 9, 1996, pp. 3773-3780. doi:10.1016/1359-6454(95)00452-1
[26] C. Lexcellent and J. Rejzner, “Modeling of the Strain Rate Effect, Creep and Relaxation of a Ni-Ti Shape Memory Alloy under Tension (Compression)-Torsional Proportional Loading in the Pseudoelastic Range,” Smart Materials and Structure, Vol. 9, No. 5, 2000, pp. 613-621.
[27] M. Huang, X. Gao and C. Brinson, “A Multi Variant Micromechanical Model for SMAs Part 2. Crystallographic Issues for Single Crystal Model,” International Journal of Plasticity, Vol. 16, No. 10-11, 2000, pp. 1371-1399. doi:10.1016/S0749-6419(00)00014-0
[28] X. Gao, M. Huang and C. Brinson, “A multivariant Micromechanical Model for SMAs Part 1. Crystallographic Issues for Single Crystal Model,” International Journal of Plasticity, Vol. 16, No. 10-11, 2000, pp. 1345-1369. doi:10.1016/S0749-6419(00)00013-9
[29] Q. P. Sun and K. C. Hwang, “Micromechanics Modelling for the Constitutive Behavior of Polycristalline Shape Memory Alloy (Part I and II),” Journal of the Mechanics and Physics of Solids, Vol. 41, No. 1, 1993, pp. 1-33. doi:10.1016/0022-5096(93)90060-S
[30] V. Kafka, “Mesomechanical Constitutive Modeling, Series on Advances in Mathematics for Applied Sciences,” Institute of technology and applied Academy of Sciences, Czech Republic World Scientific, 2001.
[31] V. Kafka, “Shape Memory under Complex Loading: Mesomechanical Modeling,” Acta Technica, Vol. 44, 1999, pp. 17-33.
[32] V. Kafka, “Two Way Shape Memory Its Nature and Modeling,” Acta Technica, Vol. 43, 1998, pp. 375-391.
[33] D. C. Lagoudas and S. G. Shu, “Residual Deformation of Active Structures with SMA Actuators,” International Journal of Mechaical Sciences, Vol. 41, No. 6, 1999, pp. 595-619. doi:10.1016/S0020-7403(98)00035-6
[34] P. Terriault, F. Viens and V. Brailovski, “Non-Isothermal Finite Element Modeling of a Shape Memory Alloy Actuator Using ANSY,” Computational Materials Science, Vol. 36, No. 4, 2006, pp. 397-410. doi:10.1016/j.commatsci.2005.05.010

comments powered by Disqus

Copyright © 2019 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.