Journal of Environmental Protection

Volume 3, Issue 9 (September 2012)

ISSN Print: 2152-2197   ISSN Online: 2152-2219

Google-based Impact Factor: 1.15  Citations  h5-index & Ranking

Study of Mechanism of the W-OH Sand Fixation

HTML  Download Download as PDF (Size: 652KB)  PP. 1025-1033  
DOI: 10.4236/jep.2012.39119    4,376 Downloads   6,724 Views  Citations

ABSTRACT

A novel hydrophilic polyurethane (abbreviated as W-OH) was developed and applied as a sustainable sand-fixing material. This paper on the chemical sand fixation mechanism of W-OH discusses the adhesive force between the W-OH solid and sand particles. The solidification mechanism was investigated and the solidifying time was tested. And then the thickness and porosity of the W-OH sand-fixing layer were investigated. By scanning electron microscopy (SEM), the microstructure of the W-OH sand-fixing layer was examined. The hardness and compressive stress of the sand-fixing specimens were studied at W-OH different concentrations. Finally, the resistance to wind erosion of the W-OH sand-fixing layer was investigated by a wind tunnel test. The results demonstrated that the W-OH aqueous solution had an excellent affinity for water on the surface of the sand particles, and the adhesive force between the W-OH solid and sand was primarily hydrogen bonding, covalent bonds and physical absorption, such as Van Der Waals forces. W-OH is a prepolymer of hydrophilic polyurethane containing groups of -NCO that can quickly react with water and other groups containing active H. The W-OH aqueous solution solidified in the range of 2 min to 15 min. The solidifying time decreased with increasing temperature and concentration. Before solidifying it had a good permeability of sand and the formed sand-fixing layer had a thickness of 8 - 35 mm and a porosity of 25% - 8% at a spraying concentration of 2 - 10 L/m2. The hardness index of the sand-fixing layer was in the range of 21 mm to 28 mm and compressive stress was in the range from 0.21 MPa mm to 1.27 MPa, both of which increased linearly with W-OH concentration. Sand treated by over 3% W-OH concentrations showed excellent resistance to wind/sand erosion of more than 25 m/s.

Share and Cite:

W. Gao, Z. Wu and Z. Wu, "Study of Mechanism of the W-OH Sand Fixation," Journal of Environmental Protection, Vol. 3 No. 9, 2012, pp. 1025-1033. doi: 10.4236/jep.2012.39119.

Cited by

[1] Bacterial Alginate-Based Hydrogel Reduces Hydro-Mechanical Soil-Related Problems in Agriculture Facing Climate Change
Sanhueza, D Cargnino-Cisternas… - Polymers, 2022
[2] Effect of Synergistic Aging on Bauxite Residue Dust Reduction Performance via the Application of Colloids, an Orthogonal Design-Based Study
2021
[3] A comprehensive research in chemical consolidator/stabilizer agents on sand production control
Journal of Petroleum …, 2021
[4] Characterization of red sand dust pollution control performance via static and dynamic laboratorial experiments when applying polymer stabilizers
2021
[5] Mechanical behavior of polymer stabilized sand under different temperatures
2021
[6] Dust control performance enhancement of red sand via the synergistic application of Na-and Ca-lignosulfonates
2021
[7] Desiccation Cracking Behavior of Polyurethane and Polyacrylamide Admixed Clayey Soils
2020
[8] Evaluation and improvement on the freeze-thaw durability performance of the polyurethane stabilized Pisha sandstone for water and soil conservation
2020
[9] Effects of different segments in polyurethane on the performance of sand stabilization
2019
[10] Treatment of bauxite residue dust pollution by improving structural stability via application of synthetic and natural polymers
2019
[11] Improving water retention capacity of an aeolian sandy soil with feldspathic sandstone
2019
[12] How the surfactants mixed with emulsion can enhance the sand fixation ability in the high salt-affected sandy land
2019
[13] Research and Application of Non-traditional Chemical Stabilizers on Bauxite 3 Residue (Red Sand) Dust Control
2018
[14] The synthesis of salt-resistant emulsion and its application in ecological sand-fixing of high salt-affected sandy land
Human and Ecological Risk Assessment An International Journal, 2017
[15] 新型 W-OH 材料对崩积体土壤分离速率的影响
土壤学报, 2017
[16] Synthesis and application of a novel waterborne polyurethane emulsion for sand fixation
2017
[17] Research and application of non-traditional chemical stabilizers on bauxite residue (red sand) dust control, a review
Science of The Total Environment, 2017
[18] Effect of simulated corrosion environment on mechanical performances of sand fixation by hydrophilic Polyurethane
2017
[19] Effect of using polymeric materials in ecological sand‐fixing of Kerqin Sandy Land of China
Journal of applied polymer science, 2016
[20] Migration behavior of anionic polyurethane dispersion during infiltration and redistribution in sand
2016
[21] Properties of surfactants on high salt-affected sandy land in enhanced sand fixation: salt tolerance, adsorption isotherms and ecological effect
RSC Advances, 2015
[22] Chemical sand stabilization: A review of material, mechanism, and problems
Environmental Technology Reviews, 2015
[23] 现有固沙材料的结构与性能内在关系的研究进展
材料导报, 2015
[24] Redox-sensitive mesoporous silica nanoparticles functionalized with PEG through a disulfide bond linker for potential anticancer drug delivery
RSC Advances, 2015
[25] Simultaneously improving the thermal stability, flame retardancy and mechanical properties of polyethylene by the combination of graphene with carbon black
Rsc Advances, 2014

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.