Author(s)

Lei Li, Haiqing Liu, Xiulan Lei, Yunyun Zhai

College of Biological, Chemical Science and Engineering, Jiaxing University, Jiaxing, China.

A simple method for the formation of molecularly imprinted membrane of Rhodamine B (RhB) was developed by electrospinning. RhB molecularly imprinted microspheres were produced by precipitation polymerization using RhB, acrylamide, ethylene glycol dimethacrylatea (EGDMA), azobisisobutyronitrile (AIBN) and acetonitrile as template, functional monomer, cross-linking agent, initiator and porogen, respectively. Then molecularly imprinted membranes (MIMs) were produced via electrospinning technique with polyethylene terephthalate (PET) as the matrix polymer. The as-prepared nanofiber membranes were characterized by scanning electron microscopy (SEM). Optimization studies with the aim to enhance the MIP selection adsorption were carried out with respect to the amount of membrane, pH and adsorption time. Linear range and detection limit were 0.01 ~ 20 μmol/L and 2.0 × 10^-3 μmol/L, respectively. HPLC analysis showed that in the optimized conditions of separation and enrichment, the recovery rate can reach 97.8% ~ 117.1%, relative standard deviation (n = 3) was 1.36% ~ 2.19% in employing MIMs to the RhB simulated water samples. The results showed that the imprinted polymer exhibited higher affinity for Rhodamine B compared to non-molecularly imprinted polymers membranes (NIMs) and molecularly imprinted particles (MIP).

Molecularly Imprinted Membrane; Electrospinning; Precipitation Polymerization; Rhodamine B; Separation and Enrichment

Li, L. , Liu, H. , Lei, X. and Zhai, Y. (2012) Electrospun Nanofiber Membranes Containing Molecularly Imprinted Polymer (MIP) for Rhodamine B (RhB). Advances in Chemical Engineering and Science, 2, 266-274. doi: 10.4236/aces.2012.22031.