Prof. Ahmet Z. Sahin
College of Engineering Sciences
King Fahd University of Petroleum and
Minerals, Saudi Arabia
Professor
Email: azsahin@kfupm.edu.sa
Qualifications
1988 Ph.D., The University of Michigan,Mechanical Engineering
1984 M.Sc., The University of
Michigan,Mechanical Engineering
1982 B.Sc., Istanbul Technical
University, Aeronautical Engineering
Publications (Selected)
-
Sahin, A.Z., Ayar, T., and Yilbas, B.S.,
"Efficiency Analysis of Laser Hole Cutting", International Journal of
Exergy, vol. 6, no. 4, pp. 592-604, 2009.
-
Sahin, A.Z, and Yilbas, B.S., "Entropy
Generation in the Flow System Generated In Between Two Parallel Plates Due To
Bivertical Motion of the Top Plate ", Sadhana, vol. 34, no. 3, pp.
455-466, 2009.
-
Sahin, A.Z., “First and Second Law
Thermodynamics Analysis of Pipe Flow”, BOOK CHAPTER in “Fluid Mechanics and
Pipe Flow: Turbulence, Simulation and Dynamics” ISBN: 978-1-60741-037-9, Nova
Science Publishers, Inc., pp. 317-342, 2009.
-
Oztop, H.F., Dagtekin, I., and Sahin, A.Z.,
"Second Law Analysis of Fully Developed Laminar Flow for Rectangular Ducts
with Semicircular Ends", International Communications in Heat and Mass
Transfer, vol. 36, no. 7, pp. 725-730, 2009.
-
Arshad, M.H., Kahraman, R., Sahin, A.Z.,
and Mansour, R.B., "Second Law Analysis of Compressible Flow through a
Diffuser Subjected to Constant Wall Temperature", International Journal of
Exergy, vol. 7, no. 1, pp. 110-129, 2010.
-
Sahin, A.Z., and Zubair, S.M., “Exergy
Analysis of Process Heaters”, International Journal of Exergy, vol. 7, no. 4,
pp. 505-520, 2010.
-
Sahin, A.Z., Ayar, T., and Yilbas, B.S.,
"Laser Welding: The First and Second Law Analysis", International
Journal of Exergy, vol. 7, no. 5, pp. 535-546, 2010.
-
Sahin, A.Z., Ayar, T., and Yilbas, B.S.,
"Laser Welding of Dissimilar Metals and Efficiency Analysis", Lasers
in Engineering, vol. 19, no. (3-4), pp. 139-152, 2010.
-
Yilbas, B.S., Sahin, A.Z., Ayar, T., and
Abdul Aleem, B.J., "Laser Nitriding of Steel Surface: Efficiency
Analysis", International Journal of Surface Science and Engineering, vol.
4, no. 4-6, pp. 492-504, 2010.
-
Arshad, M.H., Kahraman, R., Sahin, A.Z.,
and Ben-Mansour, R., "Second Law Analysis of Compressible Flow through a
Diffuser Subjected to Constant Heat Flux at Wall", Energy Conversion and
Management, vol. 51, no. 12, pp. 2808-2815, 2010.
-
Yilbas, B.S. and Sahin, A.Z.,
“Thermoelectric Device and Optimum External Load Parameter and Slenderness
Ratio”, Energy, vol. 35, no. 12, pp. 5380-5384, 2010.
-
Sahin, A.Z. and Yilbas, B.S., “The
influence of operating and device parameters on the maximum efficiency and the
maximum output power of thermoelectric generator”, International Journal of
Energy Research, accepted for publication, 2010.
-
Bejan, A., Lorente, S., Yilbas, B.S., and
Sahin, A.Z., “The effect of size on efficiency: Power plants and vascular
designs”, International Journal of Heat and Mass Transfer, vol. 54, no. 7-8,
pp. 1475–1481, 2011.
-
Sahin, A.Z., Bolat, A., and Al-Ahmari, A.,
"Investigation of Underground Water Pumping Capacity Using Wind Energy at
Dhahran", Arabian Journal for Science and Engineering, vol. 36, pp.
879-889, 2011.
-
Sahin, A.Z., Yilbas, B.S., Shuja, S.Z., and
Momin O., “Investigation into topping cycle: Thermal efficiency with and
without presence of thermoelectric generator”, Energy, vol. 36, no. 7, pp.
4048-4054, 2011.
-
Sahin, A.Z., “The natural optimality in
heat and fluid flow phenomena”, International Journal of Exergy, vol. 9, no. 3,
pp. 346-354, 2011.
-
Sahin, A.Z., “Entropy production
minimization in steady state heat conduction”, International Journal of the
Physical Sciences, vol. 6, no. 12, pp. 2826-2831, 2011.
-
Yilbas, B.S., Sahin, A.Z., Chatwin, C.,
Ayar, T., “Laser Cutting of Kevlar Laminates: First and Second Law Analysis”,
Journal of Mechanical Science and Technology, vol. 25, no. 4, pp. 855-862,
2011.
-
Yilbas, B.S., Sahin, A.Z., and Akhtar, S.,
“Laser Treatment of Alumina Surfaces: The First and The Second Law Analysis”,
International Journal of Surface Science and Engineering, vol. 5, no.2-3, pp.
116-130, 2011.
-
Sahin, A.Z., “The inherent optimality in
steady conduction of heat”, International Journal of the Physical Sciences,
vol. 6, no. 35, pp. 7828-7837, 2011.
-
Sahin, A.Z. and Yilbas, B.S., “The
influence of operating and device parameters on the maximum efficiency and the
maximum output power of thermoelectric generator”, International Journal of
Energy Research, vol. 36, pp. 111-119, 2012.
-
Sahin, A.Z., Yilbas, B.S. and Ayar, T.
“Laser cutting of ceramic and thermal efficiency analysis”, Advanced Materials
Research, vol. 445, pp. 400-435, 2012.
-
Sahin, A.Z., “Critical Insulation Thickness
for Maximum Entropy Generation”, International Journal of Exergy, vol. 10, no.
1, pp. 34-43, 2012.
-
Sahin, A.Z., “The thermodynamic quantity
minimized in steady heat and fluid flow processes: A control volume approach”,
Energy Conversion and Management, vol. 59, pp. 27-32, 2012.
-
Lorente, S., Bejan, A., Al-Hinai, K.,
Sahin, A.Z., and Yilbas, B.S., “Constructal Design of Distributed Energy
Systems: Solar Power and Water Desalination”, International Journal of Heat and
Mass Transfer, Vol. 55, no. 9-10, pp. 2213-2218, 2012.