Prof. Andreas
Kulovits
Department of
Mechanical Engineering and Materials Science,University of Pittsburgh, USA
Research Associate
Email:
akk8@pitt.edu
Qualifications
2007 Ph.D.,
Materials Science and Engineering, University of Vienna, Austria
2002 M.Sc.,
Physics, University of Vienna, Austria
1999 B.Sc.,
Physics and Chemistry, University of Pittsburgh, USA
Publications(Selected)
-
Kulovits, J.M.K. Wiezorek, W.A. Soffa, W. Pueschl, W. Pfeiler; The
influence of deformation by cold –work on L10 ordering in anisotropic FePd:
Journal of Alloys and Compounds, Volume 378, Issues 1-2, 22 September 2004,
Pages 285-2892.
-
Kulovits, W.A. Soffa, W. Pueschl, W. Pfeiler; Ordering and disordering in
L10 FePd alloys studied by residual resistivitymeasurement: Intermetallics 13,
Issue 5, May 2005, Pages 510-514
-
S. Saha, A. Kulovits, W.A. Soffa, J. Barnard: Synthesis of FePd and FePd
Ta magnetic nanocomposits by severe plastic deformation:Journal of Applied
Physics 97, Issue 10, 15 May 2005, Pages 1-3
-
Andreas K. Kulovits, John P. Leonard, Jörg M.K. Wiezorek: Microstructure
of pulsed laser deposited FePd thin films on amorphous and crystalline
substrates:Intermetallics 15, Issue 12 (2007) p. 1606-1611
-
Tae-Bong Hur, Hong Koo Kim, David Perello, Minhee Yun, Andreas Kulovits
and Jorg M. K. Wiezorek: Morphology and grain structure during epitaxial growth
of Ag films on native-oxide covered Si surface: Journal of Applied Physics 103,
Issue 10 (2008) art. No. 103507
-
Andreas Kulovits, Scott X. Mao, Jörg M.K. Wiezorek: Microstructural
changes of Nanocrystalline Ni during cold rolling Acta Materialia 56 (2008)
4836-4845
-
J. Cai, A. Kulovits, R. Shankar, J. Wiezorek: Novel microstructures from
severely deformed Al-Ti alloys created by chip formation in machining: Journal
of Materials Science 43 (23-24) (2008) 7474-7480.
-
Desphande, J. M. K. Wiezorek Cold working and Annealing of chemically
ordered L10 phase Fe50Pd50:Intermetallics 17, Issue 10 (2009) 865-871
-
R. Zhong, A. Kulovits, J. M. K. Wiezorek, J. P. Leonard: Four Zone
Solidification Microstructure formed by Laser melting of Copper thin films:
Applied Surface Science 256 (2009) 105-111
-
J. M. K. Wiezorek, A. Kulovits, X. –D. Zhang, H. L. Fraser: Slip Transfer
Across Hetero-Interfaces in Two-Phase Titanium Aluminum Interfaces:
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials
Science 42 (2011) pp. 605-612
-
J. M. K. Wiezorek, A. Kulovits, C. Yanar, W. A. Soffa: Grain Boundary
Mediated Displacive-Diffusional Formation of t-Phase in MnAl: Metallurgical and
Materials Transactions A: Physical Metallurgy and Materials Science pp. 42
(2011) 594-604
-
X. Sang, A. Kulovits, J.M.K. Wiezorek: Determination of Debye Waller Factor
and Structure factors for Si by Quantitative Convergent Beam Electron
Diffraction using off-axis Multi-Beam Orientations:Acta Crystallographica A66
(2010) 685 -693
-
X. Sang, A. Kulovits, J. M. K. Wiezorek: Simultaneous Determination of
highly precise Debye Waller Factors and Structure Factors for chemically
ordered NiAl:Acta Crystallographica A66 (2010) 694 -702
-
Kulovits, J. M. K.
Wiezorek, T. LaGrange, B. Reed, G. Campbell: Revealing the Transient States of
Rapid Solidification in Aluminum Thin Films using Ultrafast Transmissions
Electron Microscopy: Philosophical Magazine Letters 91: 4 (2011) 287-296
-
X. Sang, A. Kulovits, J. M. K. Wiezorek: Simultaneous determination of
highly precise Debye Waller factors and multiple structure factors for
chemically ordered tetragonal FePd:Acta Crystallographica A67 (2011) 229-239
-
Kulovits, W.A.
Soffa, W. Pueschl, W. Pfeiler: Ordering and disordering in anisotropic L10 FePd
Materials Research Society Symposium - Proceedings 753 (2002) pp. 387-392
-
Andreas K. Kulovits, John P. Leonard, Jörg M.K. Wiezorek: Influence of
processing parameters on microstructure of pulsed laser deposited Au thin
films: Mater. Res. Soc. Symp. Proc. 979 (2006) 91-96
-
Vincent Sokalski, Andreas Kulovits, Jorg Wiezorek: UFG and NC FePd by
combined reaction transformation mode of severely plastically deformed FePd:
Mater. Res. Soc. Symp. Proc. 980 (2007) 167-172
-
Kulovits, J
Leonard, J. Wiezorek: Microstructural evolution during post deposition
annealing of pulsed laser deposited Fe100-xPdx thin films: Mater. Res. Soc.
Symp. Proc. 980 (2007) 155-160
-
R. Zhong, A. Kulovits, J. M. K. Wiezorek, J. P. Leonard: Texture of
rapidly solidified Cu thin films studied by SEM EBSD and TEM: Ceramic
Transactions 201, (2008) pp. 35-45
-
Kulovits, S. X.
Mao, J. M. K. Wiezorek: Comparing the Role of Dislocations during Plastic
Deformation of Nanocrystalline Nickel and Coarse-Grained Ni during Cold
Rolling: Mater. Res. Soc. Symp. Proc. 1090 (2008) 13-18
-
J. M. K. Wiezorek, A. Kulovits: TEM of c – component dislocations
associated with pyramidal slip activity inTi3Al: Mater. Res. Soc. Symp. Proc.
1128 (2008) 147-152
-
K. Kulovits, J. M.
K. Wiezorek: Observation of 2 Dislocation Glide in Duplex Ti-48Al
after Room Temperature Tensile Deformation: Mater. Res. Soc. Symp. Proc. 1128
(2008) 141-146
-
K. Kulovits, B. Webler, A. R. Desphande, J. M. K. Wiezorek: Electron
Microscopy of Commercial Purity Al-2024 (Al-Mg-Cu) after Accumulative
Roll-Bonding: TMS annual meeting (2009) 63-68.