Prof. Daniel Chen

University of Saskatchewan, Canada

Professor

Email: xbc719@mail.usask.ca   

Qualifications

2002 Ph.D., University of Saskatchewan, Canada, Mechatronics

1991 M.Sc., Harbin Institute of Technology, China, Solid Mechanics

Publications(Selected)

1.      J. W. Li, E. Matias, N. Chen, C.-Y. Kim, J. Wang, J. Gorin, F. He, P. Thorpe, Y. Lu,W.F. Chen, P. Grochulski, X.B. Chen, and W.J. Zhang, 2011, “Investigations of Mechanical Vibrations for beamlines at the Canadian Light Source,” Journal of Synchrotron Radiation, vol. 18, pp. 109-116.

2.     Z. M. Zhang, Q. An, W. J. Zhang, Q. Yang, Y. J. Tang, X. B. Chen, 2011, “Modeling of Directional Friction on a Fully Lubricated Surface with Regular Anisotropic Asperities,”Meccanica, vol. 46, pp. 535-545.

3.     J. W. Li, X. B. Chen, and W. J. Zhang, 2011, “Axiomatic-Design-Theory-Based Approach to Modeling Linear High Order System Dynamics,” IEEE/ASME Transactions on Mechatronics, vol. 16, no. 2, pp. 341-350.

4.     N. Zhu, M. G. Li, Y. J. Guan, D. J. Schreyer, and X. B. Chen, 2010, “Effect of Laminin Blended with Chitosan on Axon Guidance on Patterned Substrates,” Biofabrication, vol. 2, 045002.

5.     N. K. Bawolin, M. G. Li, X. B. Chen, and W. J. Zhang, 2010, “Modeling Material-Degradation-Induced Elastic Property of Tissue Engineering Scaffolds,” ASME Journal of Biomechanical Engineering, vol. 132, no. 11, pp. 111001-1-7.

6.     M. G. Li, X. Y. Tian, N. Zhu, D. Schreyer, and X. B. Chen, 2010, “Modeling Process-Induced Cell Damage in the Bio-Dispensing Process," Tissue Engineering Part C, vol.16, no. 3, pp. 533-542.

7.     J. W. Li, X. B. Chen, and W. J. Zhang, 2010, “A New Approach to Modeling System Dynamics – in the Case of Piezoelectric Actuator with a Host System,” IEEE/ASME Transactions on Mechatronics, vol. 15, no. 3, pp. 371-380.

8.     N. K. Bawolin, W. J. Zhang, X. B. Chen, 2010, “A Brief Review of the Modelling of the Time Dependent Mechanical Properties of Tissue Engineering Scaffolds,” Journal of Biomimetics, Biomaterials, and Tissue Engineering, vol. 6, pp. 19-33.

9.     M. G. Li, X. Y. Tian, and X. B. Chen, 2009, “A Brief Review of Dispensing-Based Rapid Prototyping Techniques in Tissue Scaffold Fabrication,” Biofabrication, vol. 1, 032001.

10.   M. G. Li, X. Y. Tian, and X. B. Chen, 2009, “Modeling of Flow Rate, Pore Size and Porosity for the Dispensing-Based Tissue Scaffolds Fabrication,” ASME Journal of Manufacturing Science and Engineering, vol. 131, pp. 034501-1-5.

11.   X. B. Chen, M. G. Li, and N. Cao, 2009, “Modeling of the Fluid Volume Transferred in Contact Dispensing Processes,” IEEE Trans. on Electronics Packaging Manufacturing, vol. 32, no. 3, pp. 133-137.

12.   J. W. Li, X. B. Chen, Q. An, S. D. Tu, and W. J. Zhang, 2009 “Friction Models Incorporating Thermal Effects in Highly Precision Actuators,” Review of Scientific Instruments, vol. 80, 045014-1-6.

13.   M. G. Li and X. B. Chen, 2009, “Recent Patents in Fluid Dispensing Processes for Electronics Packaging,” Recent Patents on Mechanical Engineering, vol. 2(1): 19-25. X. B. (Daniel) Chen Curriculum Vitae (up to February 18, 2011) Page 9 /15.

14.   J. W. Li, G. S. Yang, C. Zhang, S. D. Tu, and X. B. Chen, 2009. “Thermal Error Modeling for Complex Physical Systems: The-State-of-Arts Review,” International Journal of Advanced Manufacturing Technology, vol. 42, pp.168-179.

15.   M. Hashemi and X. B. Chen, 2008 “Theoretical Investigation into the Performance of the Rotary-Screw Fluid Dispensing Process,” Canadian Society for Mechanical Engineering (CSME) Transactions, vol. 32, no. 3-4, pp. 325-331.

16.   X. B. Chen, Q. S. Zhang, D. Kang, and W. J. Zhang, 2008, “On the Dynamics of Piezo-Actuated Positioning Systems,” Review of Scientific Instruments 79, 116101-3.

17.   X. B. Chen, 2008, “Modeling and Control of Fluid Dispensing Processes: A State-of-the-Art Review, International Journal of Advanced Manufacturing Technology” (Online:August 2008).

18.   X. B. Chen, M. G. Li, and H. Ke, 2008, “Modeling of the Flow Rate in the Dispensing-Based Process for Fabricating Tissue Scaffolds,” ASME Journal of Manufacturing Science and Engineering, 130(2), 210031-7.

19.   X. B. Chen, D. Kang, and Q. S. Zhang, 2008, “On the Dynamics of Piezoelectric-Driven Stick-Slip Actuators,” Key Engineering Materials, 375, 648-652.

20.   J. W. Li, G. S. Yang, C. Zhang, S. D. Tu, and X. B. Chen, 2008 “Thermal Effect on Piezoelectric Stick-Slip Actuator Systems,” Review of Scientific Instruments, 79, 0461081-3.

Profile Details

http://homepage.usask.ca/~xbc719/