World Journal of Engineering and Technology
Vol.4 No.3DB(2016), Paper ID 71341, 6
pages
DOI:10.4236/wjet.2016.43D024
Methodology for the Study of the Quality of CFRP Dry Drilling Based on Macrogeometrical and Dimensional Deviations
J. Salguero, S. R. Fernandez-Vidal, P. Mayuet, J. M. Vazquez-Martinez, M. Alvarez, M. Marcos
Mechanical Engineering and Industrial Design Department, University of Cadiz, Cadiz, Spain
Mechanical Engineering and Industrial Design Department, University of Cadiz, Cadiz, Spain
Mechanical Engineering and Industrial Design Department, University of Cadiz, Cadiz, Spain
Mechanical Engineering and Industrial Design Department, University of Cadiz, Cadiz, Spain
Mechanical Engineering and Industrial Design Department, University of Cadiz, Cadiz, Spain
Mechanical Engineering and Industrial Design Department, University of Cadiz, Cadiz, Spain
Copyright © 2016 J. Salguero, S. R. Fernandez-Vidal, P. Mayuet, J. M. Vazquez-Martinez, M. Alvarez, M. Marcos et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Salguero, J. , Fernandez-Vidal, S. , Mayuet, P. , Vazquez-Martinez, J. , Alvarez, M. and Marcos, M. (2016) Methodology for the Study of the Quality of CFRP Dry Drilling Based on Macrogeometrical and Dimensional Deviations.
World Journal of Engineering and Technology,
4, 200-205. doi:
10.4236/wjet.2016.43D024.