Open Journal of Fluid Dynamics
Vol.5 No.3(2015), Paper ID 60044, 9
pages
DOI:10.4236/ojfd.2015.53027
A Micromixer Using the Taylor-Dean Flow: Effects of Aspect Ratio and Inflow Condition on the Mixing
Yasutaka Hayamizu, Toshihiko Kawabe, Shinichiro Yanase, Takeshi Gonda, Shinichi Morita, Shigeru Ohtsuka, Kyoji Yamamoto
Department of Mechanical Engineering, Yonago National College of Technology, Tottori, Japan
Technical Division, Tsurumi Manufacturing Co., Ltd., Tottori, Japan
Graduate School of Natural Science and Technology, Okayama University, Okayama, Japan
Department of Mechanical Engineering, Yonago National College of Technology, Tottori, Japan
Department of Mechanical Engineering, Yonago National College of Technology, Tottori, Japan
Department of Mechanical Engineering, Yonago National College of Technology, Tottori, Japan
Graduate School of Natural Science and Technology, Okayama University, Okayama, Japan
Copyright © 2015 Yasutaka Hayamizu, Toshihiko Kawabe, Shinichiro Yanase, Takeshi Gonda, Shinichi Morita, Shigeru Ohtsuka, Kyoji Yamamoto et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Hayamizu, Y. , Kawabe, T. , Yanase, S. , Gonda, T. , Morita, S. , Ohtsuka, S. and Yamamoto, K. (2015) A Micromixer Using the Taylor-Dean Flow: Effects of Aspect Ratio and Inflow Condition on the Mixing.
Open Journal of Fluid Dynamics,
5, 256-264. doi:
10.4236/ojfd.2015.53027.