Advances in Materials Physics and Chemistry

Vol.8 No.5(2018), Paper ID 84921, 19 pages

DOI:10.4236/ampc.2018.85015

 

Effect of Formation of Concentrated Stainless Steel Layer by Thermochemical Reaction and Addition of Hydrocarbon Gas on Sintered Part

 

Sang-Gweon Kim, Kuk-Hyun Yeo, Jae-Hoon Lee, Yong-Ki Cho, Masahiro Okumiya

 

Heat Treatment Technology R&BD Group, Korea Institute of Industrial Technology, Siheung, Korea
Heat Treatment Technology R&BD Group, Korea Institute of Industrial Technology, Siheung, Korea
Heat Treatment Technology R&BD Group, Korea Institute of Industrial Technology, Siheung, Korea
Heat Treatment Technology R&BD Group, Korea Institute of Industrial Technology, Siheung, Korea
Toyota Technological Institute, Nagoya, Japan

 

Copyright © 2018 Sang-Gweon Kim, Kuk-Hyun Yeo, Jae-Hoon Lee, Yong-Ki Cho, Masahiro Okumiya et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

 

How to Cite this Article


Kim, S. , Yeo, K. , Lee, J. , Cho, Y. and Okumiya, M. (2018) Effect of Formation of Concentrated Stainless Steel Layer by Thermochemical Reaction and Addition of Hydrocarbon Gas on Sintered Part. Advances in Materials Physics and Chemistry, 8, 227-245. doi: 10.4236/ampc.2018.85015.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.