Modern Research in Catalysis
Vol.7 No.1(2018), Paper ID 82513, 16
pages
DOI:10.4236/mrc.2018.71001
Improvement of a Mesh-Type Cu/Ni/γ-Al2O3/Al Catalyst for Steam Reforming of Dimethyl Ether by Metal (Fe, Zn or La) Addition for CO in Situ Removal
Qi Zhang, Yameng Chu, Xiaoqian Deng, Li Zhang, Hualong Chu
Department of Chemical Engineering, East China University of Science and Technology, Shanghai, China
Department of Chemical Engineering, East China University of Science and Technology, Shanghai, China
Department of Chemical Engineering, East China University of Science and Technology, Shanghai, China
State-Key Laboratory of Chemical Engineering, Department of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai, China
State-Key Laboratory of Chemical Engineering, Department of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai, China
Copyright © 2018 Qi Zhang, Yameng Chu, Xiaoqian Deng, Li Zhang, Hualong Chu et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
Zhang, Q. , Chu, Y. , Deng, X. , Zhang, L. and Chu, H. (2018) Improvement of a Mesh-Type Cu/Ni/γ-Al2O3/Al Catalyst for Steam Reforming of Dimethyl Ether by Metal (Fe, Zn or La) Addition for CO in Situ Removal.
Modern Research in Catalysis,
7, 1-16. doi:
10.4236/mrc.2018.71001.