World Journal of Engineering and Technology

Vol.4 No.3DB(2016), Paper ID 71339, 7 pages

DOI:10.4236/wjet.2016.43D022

 

Influence of Bed Temperature on Heat Shrinkage Shape Error in FDM Additive Manufacturing of the ABS-Engineering Plastic

 

Young-Hyu Choi, Cheol-Min Kim, Hwan-Seock Jeong, Jeong-Ho Youn

 

Department of Mechanical Engineering, Changwon National University, Changwon, Republic of Korea
Department of Mechanical Design, Changwon National University, Changwon, Republic of Korea
Department of Mechanical Design, Changwon National University, Changwon, Republic of Korea
Turf Grass Science Institute, Hanul Inc., Hapcheon-Gun, Republic of Korea

 

Copyright © 2016 Young-Hyu Choi, Cheol-Min Kim, Hwan-Seock Jeong, Jeong-Ho Youn et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

 

How to Cite this Article


Choi, Y. , Kim, C. , Jeong, H. and Youn, J. (2016) Influence of Bed Temperature on Heat Shrinkage Shape Error in FDM Additive Manufacturing of the ABS-Engineering Plastic. World Journal of Engineering and Technology, 4, 186-192. doi: 10.4236/wjet.2016.43D022.

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.