Engineering

Vol.6 No.4(2014), Paper ID 43807, 9 pages

DOI:10.4236/eng.2014.64023

 

Delaware Method Improvement for the Shell and Tubes Heat Exchanger Design

 

Miguel Toledo-Velázquez, Pedro Quinto-Diez, Juan C. Alzelmetti-Zaragoza, Sergio R. Galvan, Juan Abugaber-Francis, Arturo Reyes-León

 

Applied Thermal and Hydraulic Engineering Laboratory SEPI-ESIME-IPN Professional Unit “Adolfo Lopez Mateos”, México DF, México
Applied Thermal and Hydraulic Engineering Laboratory SEPI-ESIME-IPN Professional Unit “Adolfo Lopez Mateos”, México DF, México
Faculty of Mechanical Electrical Engineering, Universidad Veracruzana, Veracruz, México
Faculty of Mechanical Engineering, Universidad Michoacana de Sán Nicolas de Hidalgo, Edifice H, University City, Santiago Tapia 403, Col. Centro, Morelia, Michoacán, México
Applied Thermal and Hydraulic Engineering Laboratory SEPI-ESIME-IPN Professional Unit “Adolfo Lopez Mateos”, México DF, México
Applied Thermal and Hydraulic Engineering Laboratory SEPI-ESIME-IPN Professional Unit “Adolfo Lopez Mateos”, México DF, México

 

Copyright © 2014 Miguel Toledo-Velázquez, Pedro Quinto-Diez, Juan C. Alzelmetti-Zaragoza, Sergio R. Galvan, Juan Abugaber-Francis, Arturo Reyes-León et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

 

How to Cite this Article


Toledo-Velázquez, M. , Quinto-Diez, P. , Alzelmetti-Zaragoza, J. , Galvan, S. , Abugaber-Francis, J. and Reyes-León, A. (2014) Delaware Method Improvement for the Shell and Tubes Heat Exchanger Design. Engineering, 6, 193-201. doi: 10.4236/eng.2014.64023.

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.