Journal of Minerals and Materials Characterization and Engineering
Vol.1 No.5(2013), Paper ID 36919, 7
pages
DOI:10.4236/jmmce.2013.15039
Numerical Optimization of Sand Casting Parameters Using the Dantzig’s Simplex Method
John Ogheneortega Oji, Simon Godenaan Datau, Kunle Joseph Akinluwade, Adeyinka Taofeek Taiwo, Dayo Adeyemi Isadare, Sunday Hendrix Pamtoks, Adelana Rasaki Adetunji
Prototype Engineering Development Institute (PEDI), Ilesa, Nigeria
Department of Mechanical Engineering, Federal Polytechnic, Bauchi, Nigeria
Department of Materials Science and Engineering, African University of Science and Technology, Abuja, Nigeria
Department of Materials Science & Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria
Department of Materials Science & Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria
Department of Mechanical Engineering, Federal Polytechnic, Bauchi, Nigeria
Department of Materials Science & Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria
Copyright © 2013 John Ogheneortega Oji, Simon Godenaan Datau, Kunle Joseph Akinluwade, Adeyinka Taofeek Taiwo, Dayo Adeyemi Isadare, Sunday Hendrix Pamtoks, Adelana Rasaki Adetunji et al. This is
an open access article distributed under the Creative Commons Attribution
License, which permits unrestricted use, distribution, and reproduction in any
medium, provided the original work is properly cited.
How to Cite this Article
J. Oji, S. Datau, K. Akinluwade, A. Taiwo, D. Isadare, S. Pamtoks and A. Adetunji, "Numerical Optimization of Sand Casting Parameters Using the Dantzig’s Simplex Method,"
Journal of Minerals and Materials Characterization and Engineering, Vol. 1 No. 5, 2013, pp. 250-256. doi:
10.4236/jmmce.2013.15039.