Impacts of Nanoparticle Shape on Al₂O₃-Water Nanofluid Flow and Heat Transfer over a Non-Linear Radically Stretching Sheet

Umair Rashid¹, Adnan Ibrahim²

¹CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei, China.
²Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei, China.

DOI: 10.4236/anp.2020.91002                

Abstract

The results of this article can be useful in science and technology advancement, such as nanofluidics, micro mixing and energy conversion. The purpose of this article is to examine the impacts of nanoparticle shape on Al₂O₃-water nanofluid and heat transfer over a non-linear radically stretching sheet in the existence of magnetic field and thermal radiation. The different shapes of Al₂O₃ nanoparticles that have under contemplation are column, sphere, hexahedron, tetrahedron, and lamina. The governing partial differential equations (PDEs) of the problem are regenerated into set of non-linear ordinary differential equations (ODEs) by using appropriate similarity transformation. The bvp4c program has used to solve the obtained non-linear ordinary differential equation (ODEs). The Nusselt number for all shapes of Al₂O₃ nanoparticle shapes in pure water with is presented in graphical form. It has reported that the heat transfer augmentation in lamina shapes nanoparticles is more than other shapes of nanoparticle. The relation of thermal boundary layer with shapes of nanoparticles, solid volume fraction, magnetic field and thermal radiation has also presented with the help of graphical representation. It is also demonstrated that lamina shape nanoparticles have showed large temperature distribution than other shapes of nanoparticles.

Keywords

Nanofluid, Radically Stretching Sheet, Thermal Radiation, Magnetic Field, bvp4c Program

1. Introduction

The fluid flows over stretching sheet have gained considerable attention in fields of engineering due to its extensive use, such as bundle wrapping, hot rolling, extrusion of sheet material, glass fiber, wire rolling and extrusion of polymer sheet [1]. The fluid behaviour and various physical aspects are associated with the stretching sheet having been discussed by different authors [1] [2] [3] [4]. Recently, the boundary layer flow of nanofluid over a stretching sheet has become very interesting topic among researchers. The steady boundary layer flow, nanoparticle volume fraction and heat transfer in nanofluid over a linear stretching surface were analysed by khan and pop [5]. The nano boundary layer flow over a stretching sheet by applying differential transform method (DTM) was studied by Rashidi and Erfani [6]. Numerical solution of nanofluid flow in permeable rotating sheet was studied by Sheikholeslami and Ganji [7].

Due to peculiar properties, nanofluids are significant in numerous applications in heat transfer including microelectronics, hybrid powered engines, fuel cells, and pharmaceutical processes [8]. Nanofluid, containing nanoparticles was introduced by Choi et al. [9] and discussed the fluid which contains nanoparticles that were suspended in basic fluid, such as ethylne glycol, propylen glycol, water etc. Nanoparticle having high thermal conductive metals, such as, copper, aluminum, silicon or silver helps to intensify the thermal conductivity of such mixtures, which consequently improves over all the energy transport capability. Nadeem and Lee [10] introduced the nanofluid flow over an exponentially stretching sheet. Rana and Bhargave [11] extended the work, and studied the laminar boundary layer flow of a nanofluid over stretching sheet. The effects of magnetic field on a nanofluid over a stretching sheet have been investigated by Sheikholeslami and Chamkha [12]. Model of stagnation point flow of nanofluid over a stretching sheet was developed by Ul Haq et al. [13]. Mixed convection boundary layer fluid flow along a stretching sheet in porous medium was numerically discussed by Mukhopadhayay Som et al. [14].

The study of magnetic effects of nanofluid flow has gained vast attention of engineering and sciences because of its extensive significant industrial applications such as metallurgical process and polymer industry [15]. Sheikholeslami et al. [16] numerically discussed the magnetic field effect on natural convection heat transfer of water-cu and water-cuo nanofluid. Yadav et al. examined the magnetic field effect on sunset of nanofluid convection [17]. Xuan et al. [18] studied the effect of magnetic field on heat transfer of nanofluid flowing through a microchannel. Rashid [19] has been numerically studied the magnetic field effect on steady laminar flow over vertical plate. Ashorynejad et al. [15] have examined the magnetic field effect on natural convection of water-Ag nanofluid between two coaxial circular cavities. Ghasemi et al. [20] numerically investigated study on natural convection heat transfer in an inclined enclosure filled with a water-Cuo nanofluid. Mahumoudi et al. [21] numerically discussed magnetic field effect on the natural convection of water-Cuo nanofluid in triangular enclosure. Hamad [22] had investigated analytical solution of the magnetic field effect on natural convection of nanofluid over stretching sheet. Sheikholeslami and Rashid have study ferrofluid heat transfer in the existence of magnetic field [23]. Sheikholeslami and Ellahi have analyzed the effect of magnetic field on natural convection flow of nanofluid [24].

Alumina (Al₂O₃) is one of the advance and extensively used ceramic materials. Alumina is one of representative for electrical insulating materials. It has high chemical stability, high thermal conductivity and higher temperature as compared to other electro insulating such as plastic, paper and glass [25] [26] [27]. Al₂O₃ nanoparticles are plentifully produced and have used in several consumers, domestic, medical, and industrial products [28] [29]. Al₂O₃ nanoparticles have several military applications [30] due to high combustion enthalpy and pyrotechnic properties, Al₂O₃ nanoparticles have utilized as fuel in propellents [30] [31] [32]. Al₂O₃ nanoparticles also used to manufacture the batteries and electrical components [33]. Al₂O₃ nanoparticles have been proposed to use as a carrier system to enhance drug solubility [34]. Various researchers have been discussed the thermal conductivity ofwater-Al₂O₃ nanofluid. Numerical study of water-Al₂O₃ nanofluid between two parallel plates was conducted by Esfe et al. [35].

The shape of nanoparticles is very significant to change thermal conductivity of nanofluid. The present research focuses on to investigate the impacts of nanoparticle shape on Al₂O₃-water nanofluid and heat transfer over a non-linear radically stretching sheet in the presence of magnetic field and thermal radiation. There are five shapes of nanoparticles which are under consideration; column, sphere, hexahedron, tetrahedron and lamina. Numerical solutions of nonlinear ordinary differential equations (ODE’s) are solved by bvp4c program. The effects of empirical shape factor, solid volume fraction, magnetic field and radiation parameter are discussed in detail.

2. Mathematical Model

We have considered two dimensional, steady and laminar boundary layer flow in water-based nanofluid, having various shapes of Al₂O₃ nanoparticles, pass over a non-linear radically stretching sheet with influences of magnetic field and thermal radiation. The under contemplated shapes of nanoparticles are column, sphere, hexahedron, tetrahedron and lamina. The radically stretching sheet is placed at z = 0, transverse magnetic field and radiation field are applied along the z-axis, which are shown in Figure 1. Furthermore, a cylindrical co-ordinate system (r, θ, z) has been used. The flow is in rotational symmetry, so the physical quantities are independent of θ. The components of velocities u and w are direction of r and z respectively. The partial governing equations of the axisymmetric flow are

(1)

(2)

Figure 1. Schematic model and co-ordinate system.

(3)

(4)

The nanofluid flow is happened due to stretching sheet, there is no role of pressure gradient in the fluid flow field. The above equation after applying the boundary layer approximation has reduced as shown in [37].

(5)

(6)

(7)

With the boundary conditions related to problem are given by

(8)

here a > 0 is stretching constant. The effective features of nanofluids are

(9)

Here and are represented the density of base fluid, solid and nanofluid respectively. and have represented the specific heat of base fluid, solid and nanofluid respectively. is represented the solid volume fraction. is the thermal diffusivity of nanofluid. is the thermal conductivity of nanofluid.

Hamilton and crosser [38] have been presented a model for solid-liquid mixture to account the effect of particles shape. When thermal conductivity of the nanoparticles become 100 greater than base fluid, The Hamilton and crosser model are expressed as following as:-

(10)

where represents the thermal conductivity of solid. The represents the thermal conductivity of base fluid. The m represents the shape factor and its numerical values are given in Table 1. Furthermore, thermophysical properties of liquid and solid nanoparticles are presented in Table 2.

By using the nonlinear Rosseland approximation, the radiation flux converted into form

(11)

That the temperature within the flow, such as that may be expressed as a temperature liner function. Hence by expanding by Taylor series and neglecting higher order terms, we obtained the following relation

(12)

By Employing Equations (11) and (12), Equation (7) converted into

(13)

The similarity transformation of Equations (5)-(9) and stokes stream function are defined in the following form

Table 1. Values of the empirical shape and the sphericity of nanoparticle as [36]

Table 2. Thermophysical properties of Al₂O₃ and pure water.

(14)

Here and are the dimensionless stream function and similarity variable respectively. Re is the local Reynolds number, it defined as. Moreover is the quadratic stretching velocity. Thus the velocity components are

and (15)

By the Equation (15) into Equations ((5)-(6)) and Equation (13), the Equation (5) identical satisfied Equation ((6), (13)) and their related boundary value conditions reduce as

(16)

(17)

(18)

where.

Here M is the Magnetic parameter, it is defined as. is the Radiation parameter, it is defined as. Moreover, Pr is the Prandlt number, it is defined as.

The quantity of particle interest in this problem is the Nusselt number defined as

(19)

where is the wall heat flux given by

Using Equation (6) into Equation (13), we get

(20)

3. Result and Discussion

To get clear heat transfer rate for each shape of nanoparticles, numerical values with pertinent parameters have shown in the form of graphs. From Figures 2-8, it has distinguished that heat transfer rate is decreasing function of solid volume fraction, magnetic and radiation parameters. The lamina shape of nanoparticles, with, M = 1.0, and R_d = 1.0 have played remarkable in rate of heat transfer, while performance of sphere shape of nanoparticles in term of heat transfer is lowest than the other shape of nanoparticles. It is distinguished that

Figure 2. Various shapes (a)-(e) of the Al₂O₃ nanoparticles as from reference [36].

Figure 3. The effect of on Nusselt number for.

Figure 4. The effect of M on Nusselt number.

Figure 5. The effect of on Nusselt number for.

performance of heat transfer in nanoparticles is such as Lamina > Column > Tetrahedron > Hexahedron > Sphere.

The graphical depictions are used to illustrate the relation of appropriate parameters on velocity profiles and thermal boundary layers. The solid volume fraction is very significant parameter for nanofluid. Figure 9 illustrates that the

Figure 6. The effect of on Nusselt number for.

Figure 7. The effect of M on Nusselt number for.

velocity profile is an increasing function of solid volume fraction. It is also distinguished from Figure 10 that the velocity of nanoparticles decreases with increase in the magnetic field. The reason is that the resistance force, which has produced by magnetic field, opposes the flow and reduces the fluid motion. Figure 11 reveals the effects of nanoparticles’ shapes on dimensionless temperature with same basic fluid and other parameters, and it has observed that the lamina > column > tetrahedron > hexahedron > sphere. It has also been noted that lamina shape nanoparticles have maximum temperature due to minimum viscosity and thermal conductivity whereas sphere shape nanoparticles have minimum temperature due to its maximum viscosity.

Figure 8.The effect of on Nusselt number for.

Figure 9. The effect of on velocity profile of nanoparticles for.

Figure 10. The effect of M on velocity of nanoparticles for.

Figure 11. The Shape effects when and

Figure 12 shows variation of solid volume fraction in temperature profile for different shapes of nanoparticles. The shape nanoparticles are increasing function of solid volume fraction. Deduction; nanoparticles contribute to increasing thermal conductivity of base fluid; consequently, heat is transferred from radical sheet to the fluid with rapidly and has heated the thermal boundary region. Thus as the convergence of nanoparticles in base fluid raised, the temperature in the thermal boundary layer has also been raised. The thermal boundary layer thickness due to effect of solid volume fractionin lamina shapes nanoparticles is more energetic. The effect of magnetic field on nanoparticles’ shapes has been plotted in Figure 13. The lamina shape nanoparticles seem animated on other shapes of nanoparticles. Usually in boundary layer flow, the radiation parameter produces additional heat. Figure 14 depicts the variation of thermal radiation on thermal

Figure 12. The effects of when.

Figure 13. The effect of M when and.

Figure 14. The effects of when and.

boundary layer thickness of nanoparticles. It is noted that the temperature raised with intensifying value of radiation parameter, because in the presences of thermal radiation implies an immense enlarging in the radiative heat which encourage thermal state of nanofluid initiate temperature to intensify. Thermal boundary layer thickness of lamina shape nanoparticles observed more animated by thermal radiation effect.

4. Conclusions

The shapes effect of nanoparticles effects on boundary layer flow and heat transfer in Al₂O₃-water nanofluid over a non-linear radically stretching sheet have been designed in this study. The effects of nanoparticles shape, solid volume fraction, magnetic field and thermal radiation on thermal boundary layer and heat transfer rate with value of prandtle number (Pr = 6.2) have discussed in details. Non-linear thermal radiation is taken into consideration. The following results have been proven:

· The lamina shape of nanoparticles acts as principle in lead of disturbance on thermal boundary layer thickness.

· The tetrahedron shape of nanoparticles acts amidst role in disturbance of thermal boundary layer thickness.

· The sphere shape of nanoparticles shows lowest role in disturbance of thermal boundary layer thickness.

· The lamina shape of nanoparticles shows remarkable role in the rate of heat transfer.

· Performance of tetrahedron in form of heat transfer is amidst.

· Performance of sphere shape of nanoparticles in the form of heat transfer is lower than other nanoparticles shapes.

Heat transfer properties are considerably dependent on the shape effect of nanoparticles. Herein, possible increment of characteristic of water while seeded with nanoparticles is worthwhile in terms of shape effect. These considerations should be taken into account for future research directions regarding technical advancement of nanofluidics, micro mixing and energy conversion to have economically viable operations.

Conflicts of Interest

The authors declare no conflicts of interest regarding the publication of this paper.

References

[1]	Ellahi, R. and Riaz, A. (2010) Analytical Solutions for MHD Flow in a Third-Grade Fluid with Variable Viscosity. Mathematical and Computer Modelling, 52, 1783-1793. https://doi.org/10.1016/j.mcm.2010.07.005
[2]	Aziz, A. (2010) Hydrodynamic and Thermal Slip Flow Boundary Layers over a Flat Plate with Constant Heat Flux Boundary Condition. Communications in Nonlinear Science and Numerical Simulation, 15, 573-580. https://doi.org/10.1016/j.cnsns.2009.04.026
[3]	Nadeem, S., Hussain, A. and Khan, M. (2010) HAM Solutions for Boundary Layer Flow in the Region of the Stagnation Point towards a Stretching Sheet. Communications in Nonlinear Science and Numerical Simulation, 15, 475-481. https://doi.org/10.1016/j.cnsns.2009.04.037
[4]	Noor, N.F.M., Awang Kechil, S. and Hashim, I. (2010) Simple Non-Perturbative Solution for MHD Viscous Flow due to a Shrinking Sheet. Communications in Nonlinear Science and Numerical Simulation, 15, 144-148. https://doi.org/10.1016/j.cnsns.2009.03.034
[5]	Khan, W.A. and Pop, I. (2010) Boundary-Layer Flow of a Nanofluid past a Stretching Sheet. International Journal of Heat and Mass Transfer, 53, 2477-2483. https://doi.org/10.1016/j.ijheatmasstransfer.2010.01.032
[6]	Rashidi, M.M. and Erfani, E. (2011) The Modified Differential Transform Method for Investigating Nano Boundary-Layers over Stretching Surfaces. International Journal of Numerical Methods for Heat and Fluid Flow, 21, 864-883. https://doi.org/10.1108/09615531111162837
[7]	Sheikholeslami, M. and Ganji, D.D. (2014) Numerical Investigation for Two Phase Modeling of Nanofluid in a Rotating System with Permeable Sheet. Journal of Molecular Liquids, 194, 13-19. https://doi.org/10.1016/j.molliq.2014.01.003
[8]	Makinde, O.D., Khan, W.A. and Khan, Z.H. (2017) Stagnation Point Flow of MHD Chemically Reacting Nanofluid over a Stretching Convective Surface with Slip and Radiative Heat. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231, 695-703. https://doi.org/10.1177/0954408916629506
[9]	Choi, S.U.S. and Eastman, A. (1995) Enhancing Thermal Conductivity of Fluids with Nanoparticles. Proceedings of the 1995 ASME International Mechanical Engineering Congress and Exposition, Vol. 66, San Francisco, 12-17 November 1995, 99-105.
[10]	Nadeem, S. and Lee, C. (2012) Boundary Layer Flow of Nanofluid over an Exponentially Stretching Surface. Nanoscale Research Letters, 7, Article No. 94. http://www.nanoscalereslett.com/content/7/1/94 https://doi.org/10.1186/1556-276X-7-94
[11]	Rana, P. and Bhargava, R. (2012) Flow and Heat Transfer of a Nanofluid over a Nonlinearly Stretching Sheet: A Numerical Study. Communications in Nonlinear Science and Numerical Simulation, 17, 212-226. https://doi.org/10.1016/j.cnsns.2011.05.009
[12]	Sheikholeslami, M. and Chamkha, A.J. (2017) Influence of Lorentz Forces on Nanofluid Forced Convection Considering Marangoni Convection. Journal of Molecular Liquids, 225, 750-757. https://doi.org/10.1016/j.molliq.2016.11.001
[13]	Ul Haq, R., Nadeem, S., Hayat Khan, Z. and Sher Akbar, N. (2015) Thermal Radiation and Slip Effects on MHD Stagnation Point Flow of Nanofluid over a Stretching Sheet. Physica E: Low-Dimensional Systems and Nanostructures, 65, 17-23. https://doi.org/10.1016/j.physe.2014.07.013
[14]	Som, N.M., Arifin, N., Ali, F., Bachok, N. and Nazar, R. (2014) Slip Effects on MHD Non-Darcy Boundary Layer Flow over a Stretching Sheet in a Porous Medium with Radiation and Ohmic Dissipation. Mathematical and Computational Methods in Science and Engineering, 1, 174-178.
[15]	Ashorynejad, H.R., Mohamad, A.A. and Sheikholeslami, M. (2013) Magnetic Field Effects on Natural Convection Flow of a Nanofluid in a Horizontal Cylindrical Annulus Using Lattice Boltzmann Method. International Journal of Thermal Sciences, 64, 240-250. https://doi.org/10.1016/j.ijthermalsci.2012.08.006
[16]	Sheikholeslami, M., Gorji-Bandpay, M. and Ganji, D.D. (2012) Magnetic Field Effects on Natural Convection around a Horizontal Circular Cylinder inside a Square Enclosure Filled with Nanofluid. International Communications in Heat and Mass Transfer, 39, 978-986. https://doi.org/10.1016/j.icheatmasstransfer.2012.05.020
[17]	Yadav, D., Kim, C., Lee, J. and Cho, H.H. (2015) Influence of Magnetic Field on the Onset of Nanofluid Convection Induced by Purely Internal Heating. Computers and Fluids, 121, 26-36. https://doi.org/10.1016/j.compfluid.2015.07.024
[18]	Xuan, Y., Li, Q. and Ye, M. (2007) Investigations of Convective Heat Transfer in Ferrofluid Microflows Using Lattice-Boltzmann Approach. International Journal of Thermal Sciences, 46, 105-111. https://doi.org/10.1016/j.ijthermalsci.2006.04.002
[19]	Rashad, A.M. (2008) Influence of Radiation on MHD Free Convection from a Vertical Flat Plate Embedded in Porous Media with Thermophoretic Deposition of Particles. Communications in Nonlinear Science and Numerical Simulation, 13, 2213-2222. https://doi.org/10.1016/j.cnsns.2007.07.002
[20]	Ghasemi, B. and Aminossadati, S.M. (2009) Natural Convection Heat Transfer in an Inclined Enclosure Filled with a Water-Cuo Nanofluid. Numerical Heat Transfer: Part A: Applications, 55, 807-823. https://doi.org/10.1080/10407780902864623
[21]	Mahmoudi, A.H., Pop, I. and Shahi, M. (2012) Effect of Magnetic Field on Natural Convection in a Triangular Enclosure Filled with Nanofluid. International Journal of Thermal Sciences, 59, 126-140. https://doi.org/10.1016/j.ijthermalsci.2012.04.006
[22]	Hamad, M.A.A. (2011) Analytical Solution of Natural Convection Flow of a Nanofluid over a Linearly Stretching Sheet in the Presence of Magnetic Field. International Communications in Heat and Mass Transfer, 38, 487-492. https://doi.org/10.1016/j.icheatmasstransfer.2010.12.042
[23]	Sheikholeslami, M. and Rashidi, M.M. (2015) Ferrofluid Heat Transfer Treatment in the Presence of Variable Magnetic Field. European Physical Journal Plus, 130, Article No. 115. https://doi.org/10.1140/epjp/i2015-15115-4
[24]	Sheikholeslami, M. and Ellahi, R. (2015) Three Dimensional Mesoscopic Simulation of Magnetic Field Effect on Natural Convection of Nanofluid. International Journal of Heat and Mass Transfer, 89, 799-808. https://doi.org/10.1016/j.ijheatmasstransfer.2015.05.110
[25]	Shen, X., Nie, X., Hu, H. and Tjong, J. (2012) Effects of Coating Thickness on Thermal Conductivities of Alumina Coatings and Alumina/Aluminum Hybrid Materials Prepared Using Plasma Electrolytic Oxidation. Surface and Coatings Technology, 207, 96-101. https://doi.org/10.1016/j.surfcoat.2012.06.009
[26]	Musil, J., Blazek, J., Zeman, P., Prokšová, Š., Šašek, M. and Cerstvy, R. (2010) Thermal Stability of Alumina Thin Films Containing γ-Al2O3 Phase Prepared by Reactive Magnetron Sputtering. Applied Surface Science, 257, 1058-1062. https://doi.org/10.1016/j.apsusc.2010.07.107
[27]	Vanbesien, K., De Visschere, P., Smet, P.F. and Poelman, D. (2006) Electrical Properties of Al2O3 Films for TFEL-Devices Made with Sol-Gel Technology. Thin Solid Films, 514, 323-328. https://doi.org/10.1016/j.tsf.2006.02.034
[28]	Balasubramanyam, A., Sailaja, N., Mahboob, M., Rahman, M.F., Misra, S., Hussain, S.M., et al. (2009) Evaluation of Genotoxic Effects of Oral Exposure to Aluminum Oxide Nanomaterials in Rat Bone Marrow. Mutation Research—Genetic Toxicology and Environmental Mutagenesis, 676, 41-47. https://doi.org/10.1016/j.mrgentox.2009.03.004
[29]	M’rad, I., Jeljeli, M., Rihane, N., Hilber, P., Sakly, M. and Amara, S. (2018) Aluminium Oxide Nanoparticles Compromise Spatial Learning and Memory Performance in Rats. EXCLI Journal, 17, 200-210.
[30]	Miziolek, A.W. (2012) Nanoenergetics: An Emerging Technology Area of National Importance. The AMPTIAC Newsletter, 6, 43-48.
[31]	Ghanta, S.R. and Muralidharan, K. (2013) Chemical Synthesis of Aluminum Nanoparticles. Journal of Nanoparticle Research, 15, 1715. https://doi.org/10.1007/s11051-013-1715-1
[32]	Wagner, A.J., Bleckmann, C.A., Murdock, R.C., Schrand, A.M., Schlager, J.J. and Hussain, S.M. (2007) Cellular Interaction of Different Forms of Aluminum Nanoparticles in Rat Alveolar Macrophages. Journal of Physical Chemistry B, 111, 7353-7359. https://doi.org/10.1021/jp068938n
[33]	Klapötke, T. and Piercey, D. (2010) Nanoscale Aluminum—Metal Oxide (Thermite) Reactions for Application in Energetic Materials. Central European Journal of Energetic Materials, 7, 115-129.
[34]	Tyner, K.M., Schiffman, S.R. and Giannelis, E.P. (2004) Nanobiohybrids as Delivery Vehicles for Camptothecin. Journal of Controlled Release, 95, 501-514. https://doi.org/10.1016/j.jconrel.2003.12.027
[35]	Esfe, M.H., Arani, A.A.A., Azizi, T., Mousavi, S.H. and Wongwises, S. (2017) Numerical Study of Laminar-Forced Convection of Al2O3-Water Nanofluids between Two Parallel Plates. Journal of Mechanical Science and Technology, 31, 785-796. https://doi.org/10.1007/s12206-017-0130-4
[36]	Lin, Y., Li, B., Zheng, L. and Chen, G. (2016) Particle Shape and Radiation Effects on Marangoni Boundary Layer Flow and Heat Transfer of Copper-Water Nanofluid Driven by an Exponential Temperature. Powder Technology, 301, 379-386. https://doi.org/10.1016/j.powtec.2016.06.029
[37]	Ali, R., Shahzad, A., Khan, M. and Ayub, M. (2016) Analytic and Numerical Solutions for Axisymmetric Flow with Partial Slip. Engineering with Computers, 32, 149-154. https://doi.org/10.1007/s00366-015-0405-2
[38]	Hamilton, R.L. (1962) Thermal Conductivity of Heterogeneous Two-Component Systems. Industrial and Engineering Chemistry Fundamentals, 1, 187-191. https://doi.org/10.1021/i160003a005