[1]
|
[1] L. L. Hench, “Bioceramics,” Journal of the American Ce-ramic Society, Vol. 81, No.7, 1998, pp. 1705-1728.
|
[2]
|
[2] A. Clifford and R. Hill, “Apatite-Mullite Glass-Ceramics,” Journal of Non-Crystalline Solids, Vol. 19, No. 6, 1996, pp. 346-351. doi:10.1016/0022-3093(95)00611-7
|
[3]
|
[3] L. L. Hench, “Bioceramics,” Journal of the American Cra- mic Society, Vol. 81, No. 7, 1998, pp. 1705-1728.
|
[4]
|
[4] S. M. Best, A. E. Porter, E. S. Thian and J. Huang, “Bioce-ramics: Past, Present and for the Future,” Journal of Euro-pean Ceramic Society, Vol. 28, 2008, pp. 1319-1327. doi:10.1016/j.jeurceramsoc.2007.12.001
|
[5]
|
[5] L. M. Rodriguez-Lorenzo, J. N. Hart and K. A. Gross, “In-fluence of Fluorine in the Synthesis of Apatites. Synthesis of Solid Solutions of Hydroxyl-Fluorapatite,” Biomaterials, Vol.24, 2003, pp. 3777-3785.
doi:10.1016/S0142-9612(03)00259-X
|
[6]
|
[6] S. M. Barinova, L. I. Shvorneva, D. Ferro, I. V. Fadeeva and S. V. Tumano, “Solid Solution Formation at the Sintering of Hydroxyapatite-Fluorapatite Ceramics,” Science and Tech-nology of Advanced Materials, Vol. 5, 2004, pp. 537-541. doi:10.1016/j.stam.2004.02.012
|
[7]
|
[7] M. J. Larsen and A. Thorson, “A Comparaison of Some Effects of Fluoride on Apatite Formation in Vitro and in Vivo,” Calc. Tiss. Int., Vol. 36, No. 6, 1984, pp. 690-696.
doi:10.1007/BF02405391
|
[8]
|
[8] L. Gineste, M. Gineste, X. Ranz, A. Ellefterion, A. Guilhem, N. Rouquet and P. Frayssinet, “Degradation of Hydroxylapa-tite, Fluorapatite and Fluorhydroxyapatite Coatings of Dental Implants in Dogs,” Journal of Biomedical Materials Re-search, Vol. 48, No. 3, 1999, pp. 224-234.
doi:10.1002/(SICI)1097-4636(1999)48:3<224::AID-JBM5>3.0.CO;2-A
|
[9]
|
[9] B. H. Yoon, H. W. Kim, S. H. Lee, C. J. Bae, Y. H. Koh,Y. M. Kong and H. E. Kim, “Stability and Cellular Responses to Fluorapatite-Collagen Composites,” Biomaterials, Vol. 26, 2005, pp. 2957-2963. doi:10.1016/j.biomaterials.2004.07.062
|
[10]
|
[10] K. A. Gross and K. A. Bhadang, “Sintered Hydroxyfluorapa-tite. Part III: Sintering and Resultant Mechanical Properties of Sintered Blends of Hydroxyapatite and Fluorapatite,” Bio-materials, Vol. 25, 2004, pp. 1395-1405.
doi:10.1016/j.biomaterials.2003.08.051
|
[11]
|
[11] S. V. Dorozhkin, “Bioceramics of Calcium Orthophos-phates,” Biomaterials, Vol. 31, 2010, pp. 1465-1485.
doi:10.1016/j.biomaterials.2009.11.050
|
[12]
|
[12] M. Fulmer and P. W. Brown, “Low-Temperature Formation of Fluorapatite in Aqueous Solution,” Journal of the Ameri-can Ceramic Society, Vol.75, No.12 1992, pp. 401-407.
|
[13]
|
[13] P. Uwe, E. Angela and R. Christian, “A Pyrolytic Route for the Formation of Hydroxyapatite-Fluorapatite Solid Solu-tions,” Journal of Materials Science, Material Medical, Vol. 4, No. 3, 1993, pp. 292-295.
|
[14]
|
[14] J. C. Elliott, “Structure and Chemistry of the Apatite and Other Calcium Orthophosphates,” Elsevier Science., Am-sterdam, 1994.
|
[15]
|
[15] E. D. Franz and R. Telle, “Reaction Hot Pressing of Fluora-patite for Dental Implants,” In: P. Vincenzini, Ed., Hight Tech Ceramics, Elsevier Science, Amsterdam, 1987, pp. 31-41.
|
[16]
|
[16] E. Landi, A. Tampieri, G. Celotti and S. Sprio, “Densifica-tion Behaviour and Mechanisms of Synthetic Hydroxyapa-tites,” Journal of European Ceramic Society, Vol. 20, 2000, pp. 2377-2387. doi:10.1016/S0955-2219(00)00154-0
|
[17]
|
[17] F. Ben Ayed, J. Bouaziz and K. Bouzouita, “Résistance Mé-canique de la Fluorapatite, ” Annales de Chimie-Science des Materiaux, Vol. 31, No. 4, 2006, pp. 393-406.
doi:10.3166/acsm.31.393-406
|
[18]
|
[18] S. Agathopoulos, D. U. Tulyaganov, P. A. A. P. Marques, M. C. Ferro, M. H. V. Fernandes and R. N. Correia, “The Fluora-patite-Anorthite System in Biomedicine,” Biomaterials, Vol. 24, 2003, pp. 1317-1331.
doi:10.1016/S0142-9612(02)00468-4
|
[19]
|
[19] K. A. Gross and L. M. Rodr?guez-Lorenzo, “Biodegradable Composite Scaffolds with an Interconnected Spherical Net-work for Bone Tissue Engineering,” Biomaterials, Vol. 25, 2004, pp. 4955-4962. doi:10.1016/j.biomaterials.2004.01.046
|
[20]
|
[20] A. Rapacz-Kmita , A. Slosarczyk and Z. Paszkiewicz, “Me-chanical Properties of Hap-ZrO2 Composites,” Journal of European Ceramic Society, Vol. 26, 2006, pp. 1481-1488. doi:10.1016/j.jeurceramsoc.2005.01.059
|
[21]
|
[21] W. Zhenjun, H. Liping and Z. Chen, “Composite Biocoating of Hydroxyapatite/Al2O3 on Titanium Formed by Al Anodi-zation and Electrodeposition,” Materials Letters, Vol. 61, 2007, pp. 2952-2955. doi:10.1016/j.matlet.2006.10.050
|
[22]
|
[22] B. Viswanath and N. Ravishankar, “Interfacial Reactions in Hydroxyapatite/Alumina Nanocomposites,” Scripta Materi-alia, Vol. 55, 2006, pp. 863-866.
doi:10.1016/j.scriptamat.2006.07.049
|
[23]
|
[23] B. T. Lee, C. W. Lee, A. K. Gain and H. Y. Song, “Micro-structures and Material Properties of Fibrous Hap/Al2O3- ZrO2 Composites Fabricated by Multi-Pass Extrusion Proc-ess,” Journal of European Ceramic Society, Vol. 27, 2007, pp. 157-163. doi:10.1016/j.jeurceramsoc.2006.02.038
|
[24]
|
[24] J. M. Ten Cate and J. D. B. Featherstone, “Mechanistic As-pects of the Interaction between Fluoride and Dental Enamel,” Critical Reviews in Oral Biology and Medicine, Vol. 2, 1991, pp. 283-296.
|
[25]
|
[25] C. L. Deal, “Osteoporosis: Prevention, Diagnosis, and Man-agement,” American Journal of Medicine, Vol. 102, No. 1A (Supplement), 1997, pp. 35S-9S.
doi:10.1016/S0002-9343(97)00415-4
|
[26]
|
[26] F. Menaa, B. Menaa and O. Sharts, “Fluoro-Raman Spec-troscopy as New Analytical Tool for Pharmaceutical and Biomedical Applications,” Faraday Discussions, Vol. 149, 2011, pp. 269-278.
doi:10.1039/c005252c
|
[27]
|
[27] L. L. Demos, H. Kazada, F. M. Cicuttini, M. I. Sinclair and CK. Fairly, “Water Fluoridation, Osteoporosis, Fractures— Recent Developments,” Australian Dental Journal, Vol. 46, No.2, 2001, pp. 80-87.
doi:10.1111/j.1834-7819.2001.tb00561.x
|
[28]
|
[28] F. Ben Ayed, J. Bouaziz and K. Bouzouita, “Pressureless Sintering of Fluorapatite under Oxygen Atmosphere,” Jour-nal of European Ceramic Society, Vol. 20, No. 8, 2000, pp. 1069-1067. doi:10.1016/S0955-2219(99)00272-1
|
[29]
|
[29] F. Ben Ayed, J. Bouaziz and K. Bouzouita, “Calcination and Sintering of Fluorapatite under Argon Atmosphere,” Journal of Alloys and Compounds, Vol. 322, No.1-2, 2001, pp. 238-245. doi:10.1016/S0925-8388(01)01200-2
|
[30]
|
[30] J. C. Heughebaert, “Contribution à L’étude de L’évolution des Orthophosphates de Calcium Précipités en Orthophos-phates Apatitiques,” Thèse, INP, Toulouse, 1977.
|
[31]
|
[31] G. E. Cootea, R. J. Sparksa and P. Blattnerb, “Nuclear Mi-croprobe Measurement of Fluorine Concentration Profiles, with Application in Archaeology and Geology,” Nuclear In-struments Methods, Vol. 197, 1982, pp. 213-221.
doi:10.1016/0167-5087(82)90139-9
|
[32]
|
[32] S. Brunauer, P. H. Emmet and J. Teller, “Absorption of Gases in Multimolecular Layers,” Journal of the American Chemical Society, Vol. 60, 1938, pp. 310-319.
doi:10.1021/ja01269a023
|
[33]
|
[33] R. Z. Legeros, “Crystallography Studies of the Carbonate Substitution in the Apatite Structure,” PhD thesis, New York University, 1967.
|
[34]
|
[34] N. Senamaud, D. Bemache-Assollant, E. Champion, M. Heughebaertb and C. Reyb, “Calcination and Sintering of Hydroxyfluorapatite Powders,” Solid State Ionics. 101-103, 1997, pp. 1357-1362.
doi:10.1016/S0167-2738(97)00242-7
|
[35]
|
[35] S. Kim, Y. M. Kong, I. S. Lee and H. E. Kim, “Effect of Calcinations of Starting Powder on Mechanical Properties of Hydroxyapatite-Alumina Bioceramic Composite,” Journal of Materials Science: Material Medical, Vol. 13, 2002, pp. 307-310. doi:10.1023/A:1014019103240
|
[36]
|
[36] D. Santhiya, S. Subramanian, K. A. Natarajan and S. G. Malghan, “Surface Chemical Studies on Alumina Suspen-sions Using Ammonium Poly(Methacrylate),” Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 164, 2000, pp. 143-154.
doi:10.1016/S0927-7757(99)00347-7
|
[37]
|
[37] Y. Chen, S. Liu and G. Wang, “Kinetics and Adsorption Behavior of Carboxymethyl Starch on Α-Alumina in Aque-ous Medium,” Journal of Colloid and Interface Science, Vol. 303, 2006, pp. 380-387. doi:10.1016/j.jcis.2006.08.011
|
[38]
|
[38] A. Boumaza, L. Favaro, J. Lédion, G. Sattonnay, J. B. Bru-bach, P.Berthet, A. M. Huntz, P. Roy and R. Tétot, “Transi-tion Alumina Phases Induced by Heat Treatment of Boeh-mite: An X-Ray Diffraction and Infrared Spectroscopy Study,” Journal of Solid State Chemistry, Vol. 182, 2009, pp. 1171-1176. doi:10.1016/j.jssc.2009.02.006
|
[39]
|
[39] K. A. Bhadang and K. A. Gross, “Influence of Fluorapatite on the Properties of Thermally Sprayed Hydroxyapatite Coatings,” Biomaterials, Vol. 25, 2004, pp. 4935-4945.
doi:10.1016/j.biomaterials.2004.02.043
|
[40]
|
[40] M. Hidouri, K. Bouzouita, F. Kooli and I. Khattech, “Ther-mal Behaviour of Magnesium-Containing Fluorapatite,” Materials Chemistry and Physics, Vol. 80, No. 2003, pp. 496-505. doi:10.1016/S0254-0584(02)00553-9
|
[41]
|
[41] M. Hidouri, K. Bouzouita, A. Aissa and M. Debbabi, “étude Structurale des Fluorapatites Contenant du Magnésium en Substitution,” Comptes Rendus Chimie, Vol. 7, 2004, pp. 699-705.
doi:10.1016/j.crci.2004.04.003
|
[42]
|
[42] K. Chaari, F. Ben Ayed, J. Bouaziz and K. Bouzouita, “Elaboration and Characterization of Fluorapatite Ceramic with Controlled Porosity,” Materials Chemistry and Physics, Vol. 113, No.1, 2009, pp. 219-226.
doi:10.1016/j.matchemphys.2008.07.079
|
[43]
|
[43] Z. He and J. Ma, “Constitutive Modeling of Alumina Sinter-ing: Grain-Size Effect on Dominant Densification Mecha-nism,” Computational Materials Science, Vol. 32, 2005, pp. 196-202. doi:10.1016/j.commatsci.2004.08.006
|
[44]
|
[44] J. F. Roy, M. Descemond, C. Brodhag and F. Thevenot, “Alu-mina Microstructural Behaviour under Pressureless Sintering and Hot-Pressing,” Journal of European Ceramic Society, Vol. 11, 1993, pp. 325-333. doi:10.1016/0955-2219(93)90032-M
|
[45]
|
[45] P. Quirmbach, M. Wolf and R. J. Brook, “Development of Microstructure during Pressureless Sintering of Alumina,” Journal of European Ceramic Society, Vol. 10, 1992, pp. 51-57. doi:10.1016/0955-2219(92)90118-W
|
[46]
|
[46] M. Azar, P. Palmero, M. Lombardi, V. Garnier, L. Mon-tanaro, G. Fantozzi and J. Chevalier, “Effect of Initial Parti-cle Packing on the Sintering of Nanostructured Transition Alumina,” Journal of European Ceramic Society, Vol. 28 2008, pp. 1121-1128.
doi:10.1016/j.jeurceramsoc.2007.10.003
|
[47]
|
[47] H. Fischer, R. Wei? and R. Telle, “Crack Healing in Alu-mina Bioceramics,” Dental Materials, Vol. 24, 2008, pp. 328-332.
|
[48]
|
[48] X. Teng, H. Liu and Ch. Huang, “Effect of Al2O3 Particle size on the Mechanical Properties of Alumina-Based Ceram-ics,” Materials Science and Engineering: A, Vol. 452-453, 2007, pp. 773-780.
doi:10.1016/j.msea.2006.10.073
|
[49]
|
[49] H. M. Lee, C. Y. Huang and C. J. Wang, “Forming and Sin-tering Behaviors of Commercial α-Al2O3 Powders with Dif-ferent Particle Size Distribution and Agglomeration,” Jour-nal of Materials Processing Technology, Vol. 209, No. 2, 2009, pp. 714-722. doi:10.1016/j.jmatprotec.2008.02.047
|
[50]
|
[50] N. Louet, H. Reveron and G. Fantozzi, “Sintering Behaviour and Microstructural Evolution of Ultrapure Α-Alumina Con-taining Low Amounts of SiO2,” Journal of European Ce-ramic Society, Vol. 28, 2008, pp. 205-215.
doi:10.1016/j.jeurceramsoc.2007.04.015
|
[51]
|
[51] F. Ben Ayed, “Frittage Et Caractérisation de la Fluorapatite,” faculté des sciences de sfax, 2003.
|
[52]
|
[52] N. Bouslama, F. Ben Ayed and J. Bouaziz, “Sintering and Mechanical Properties of Tricalcium Phosphate-Fluorapatie Composites,” Ceramics International, Vol. 35, 2009, pp. 1909-1917. doi:10.1016/j.ceramint.2008.10.030
|
[53]
|
[53] F. Ben Ayed and J. Bouaziz, “Sintering of Tricalcium Phos-phate-Fluorapatite Composites by Addition of Alumina,” Ceramics International, Vol. 34, 2008, pp. 1885-1892.
doi:10.1016/j.ceramint.2007.07.017
|
[54]
|
[54] H. Ji and P. M. Marquis, “Sintering Behaviour of Hy-droxyapatite Reinforced with 20 wt% Al2O3,” Journal of Materials Science, Vol. 28, 1993, pp. 1941-1945.
doi:10.1007/BF00595767
|
[55]
|
[55] H.Y. Juang and M.H. Hon, “Fabrication and Mechanical Properties of Hydroxyapatite-Alumina Composites,” Mate-rial Science and Engineering, Vol. 12, 1994, pp. 77-81.
doi:10.1016/0928-4931(94),90033-7
|
[56]
|
[56] D. Asmi, I. M. Low, B. H. O’Connor and C. Buckley, “Phase Compositions and Depth Profiling of Calcium Aluminates in a Functionally-Graded Alumina/Calcium- Hex-aluminate Composite,” Journal of Materials Processing Technology, Vol. 118, 2001, pp. 219-224.
doi:10.1016/S0924-0136(01)00963-3
|
[57]
|
[57] A. Gutiérrez-Alejandre, M. Gonzalez-Crus, M. Trombetta, G. Busca and J. Ramirez, “Chracterisation of Alumina-Titania Mixed Oxide Supports, Part II: Al2O3-Based Supports,” Mi-crop. Mesop. Mat., Vol. 23, 1998, pp. 265-275.
doi:10.1016/S1387-1811(98)00121-8
|
[58]
|
[58] G. Del Angel, C. Guzman, A. Bonilia, G. Torres amd J. M. “Padilia, Lanthanum Effect on the Structural Properties of γ-Al2O3 Obtained from Bohemite,” Materials Letters, Vol. 59, 2005, pp. 499-502.
|
[59]
|
[59] K. J. D. MacKenzie, M. Schmuècker, M. E. Smith, I. J. F. Poplett and T. Kemmitt, “Evolution of Crystalline Aluminates from Hybrid Gel-derived Precursors Studied by XRD and Mul-tinuclear Solid State MAS NMR IV: Calcium Dialuminate, CaAl4O7 and Calcium Hexaluminate,” Thermochemical Acta, Vol. 363, 2000, pp. 181-188.
doi:10.1016/S0040-6031(00)00630-4
|
[60]
|
[60] B. Lazic, H. Kriiger, V. Kahlenberg, J. Konzett and R. Kaindl, “Incommensurate Structure of Ca2Al2O5 at High Temperature-Structure Investigation and Raman Spectros-copy,” Acta Crystallographica, 2008, pp. 417-425.
|
[61]
|
[61] J. M. Poujade, C. Zerbib and D. Serre, “Céramiques den-taires,” EMC-Dentisterie, Vol. 1, 2004, pp. 101-117.
doi:10.1016/j.emcden.2003.11.002
|