Resilience Engineering for Sustainable Prevention in the Manufacturing Sector: A Comparative Study of Two Methods of Risk Analysis

Journals Menu

Follow SCIRP

ISSN Print: 2164-5167
ISSN Online: 2164-5175
www.scirp.org/journal/ajibm
E-mail: ajibm@scirp.org

"Resilience Engineering for Sustainable Prevention in the Manufacturing Sector: A Comparative Study of Two Methods of Risk Analysis"
written by Annick Melanson, Sylvie Nadeau,
published by American Journal of Industrial and Business Management, Vol.9 No.1, 2019

has been cited by the following article(s):

[1]	Application of FRAM to perform Risk Analysis of the Introduction of a Data Glove to Assembly Tasks
	Robotics and Computer-Integrated Manufacturing, 2022

[2]	The Functional Resonance Analysis Method: A Performance Appraisal Tool for Risk Assessment and Accident Investigation in Complex and Dynamic Socio …
	Nour, D Komljenovic - American Journal of Industrial and …, 2022

[3]	Integrated Reliability, Resilience and Sustainability Framework for Water Supply Systems Risk Management
	2022

[4]	ANALISIS RISIKO KECELAKAAN KERJA DENGAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA)(Studi Kasus: Pekerja Project Economizer, Tangki …
	SITEKIN: Jurnal Sains …, 2022

[5]	Étude des facteurs contributifs à l'erreur humaine dans l'assemblage manuel complexe: le cas d'une usine de fabrication de moteurs d'avions
	2022

[6]	FRAM and STAMP new avenue for risk analysis of manufacturing in the context of industry 4.0
	2021

[7]	FRAM and STAMP: New Avenue for Risk Analysis in Manufacturing in the Era of Industry 4.0
	Conference Paper, 2021

[8]	Framing the FRAM: A literature review on the functional resonance analysis method
	2020

[9]	A mixed rough sets/fuzzy logic approach for modelling systemic performance variability with FRAM
	2020

[1]	Occupational and Environmental Safety and Health V Studies in Systems, Decision and Control, 2024 DOI:10.1007/978-3-031-38277-2_65

[2]	Application of FRAM to perform Risk Analysis of the Introduction of a Data Glove to Assembly Tasks Robotics and Computer-Integrated Manufacturing, 2022 DOI:10.1016/j.rcim.2021.102285

[3]	Application of FRAM to perform Risk Analysis of the Introduction of a Data Glove to Assembly Tasks Robotics and Computer-Integrated Manufacturing, 2022 DOI:10.1016/j.rcim.2021.102285

[4]	A Mixed Rough Sets/Fuzzy Logic Approach for Modelling Systemic Performance Variability with FRAM Sustainability, 2020 DOI:10.3390/su12051918

Follow SCIRP