"Ultra Fast Spray Cooling and Critical Droplet Daimeter Estimation from Cooling Rate"
written by Muhammad Aamir, Liao Qiang, Zhu Xun, Wang Hong, Muhammad Zubair,
published by Journal of Power and Energy Engineering, Vol.2 No.4, 2014
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Ultra-Fast Cooling of Flat Metal Pate in a Modified Runout Table
2019
[2] Response surface method-based optimisation of spray parameters during impingement cooling of hot steel in rolling
International Journal of Process Management and Benchmarking, 2018
[3] Upward and downward facing high mass flux spray cooling with additives: A novel technique to enhance the heat removal rate at high initial surface temperature
Heat and Mass Transfer, 2018
[4] High mass flux air atomized spray with subcooled water: A novel methodology to enhance the heat transfer rate in film boiling regime
International Journal of Heat and Mass Transfer, 2018
[5] Cooling mechanisms on run out table: A technical review
Materials Today: Proceedings, 2018
[6] Nozzle positioning for ultra-fast cooling of steel strips in a run out table
Materials Today: Proceedings, 2018
[7] The influence of container geometry and thermal conductivity on evaporation of water at low pressures
Scientific Reports, 2018
[8] GA Optimization of Cooling Rate of a Heated MS Plate in a Laboratory-Scale ROT
2018
[9] Experimental Investigation and Optimization of Air-Water SprayImpingement Cooling to Enhance Heat Transfer
International Journal of Engineering and Technology, 2016
[10] Desirability function based optimization of experimental data for air-water spray impingement cooling
Management Science Letters, 2016
[11] Heat transfer characteristic research during jet impinging on top/bottom hot steel plate
International Journal of Heat and Mass Transfer, 2016
[12] Thermal characteristics of air-water spray impingement cooling of hot metallic surface under controlled parametric conditions
Journal of Thermal Science, 2016
[13] Influence of spray characteristics on heat flux in dual phase spray impingement cooling of hot surface
Alexandria Engineering Journal, 2016
[14] Cooling of Steel Plate-An Experimental Investigation
Food Biotechnology, 2016
[15] Flow/Heat Transfer Characteristics Analysis of Spray Cooling
2016
[16] Experimental investigation and optimization of air-water spray impingement cooling to enhance heat transfer
2016
[17] 國立中山大學機械與機電工程學系碩士論文
2011
[18] Management Science Letters
2010