Numerical Prediction of Symmetric Water Impact Loads on Wedge Shaped Hull Form Using CFD

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

World Journal of Mechanics

ISSN Print: 2160-049X
ISSN Online: 2160-0503
www.scirp.org/journal/wjm
E-mail: wjm@scirp.org

Google-based Impact Factor: 1
Citations h5-index & Ranking

Journals Menu

"Numerical Prediction of Symmetric Water Impact Loads on Wedge Shaped Hull Form Using CFD"
written by Ahmed Swidan, Walid Amin, Dev Ranmuthugala, Giles Thomas, Irene Penesis,
published by World Journal of Mechanics, Vol.3 No.8, 2013

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Numerical investigation on the water entry of a 2D seaplane section with heel angles
	Ocean Engineering, 2022

[2]	Numerical investigation into water entry problems of a flat plate with air pockets
	Journal of Ocean …, 2022

[3]	A passive flow separation approach for reducing slamming loads on large catamarans: experimental investigation
	Maritime Research and Technology, 2022

[4]	CFD modelling and grid uncertainty analysis of the free-falling water entry of 2D rigid bodies
	Applied Ocean Research, 2021

[5]	Accurate Prediction of Landing Loads for a New Design of a Wing-In-Ground Maritime Surveillance Drone–CFD Investigation
	2021 31st International …, 2021

[6]	Numerical simulation on the water entry of bow-flare section considering bulbous bow
	2020

[7]	Studying the influence of different Centre bow cross-sections in maximum acceleration in drop test in HARTH vessel
	2020

[8]	بررسی فرم های مقاطع مختلف دماغه ی مرکزی در میزان بیشینه ی شتاب در مسئله ی سقوط آزاد در شناور هارث‎
	2020

[9]	Debris Hazard Assessment in Extreme Flooding Events
	2019

[10]	A Novel Concept in Reducing Wetdeck Slamming Loads-CFD Investigation
	2019

[11]	Performance comparison of ordinary-chine wedges with flat-chine wedges in water entry problem
	2019

[12]	Numerical simulation of vertical water impact of asymmetric wedges by using a finite volume method combined with a volume-of-fluid technique
	Ocean Engineering, 2018

[13]	Numerical study on the water entry of curved wedges
	Ships and Offshore Structures, 2018

[14]	Validation Exercises for a Free Falling Wedge into Calm Water
	2018

[15]	Solving the problem of water impact in waves by improving a constrained interpolation profile based method
	2018

[16]	Review of Ship Slamming Loads and Responses
	Journal of Marine Science and Application, 2017

[17]	PREDICTION OF THE PROPULSION PERFORMANCES OF PLANING STEPPED HULLS: CFD IN SUPPORT OF EXPERIMENTAL TOWING TANK TESTS
	2017

[18]	Numerical Investigation of Water-Entry Problems Using IBM Method
	2017

[19]	Review of ship slamming
	Journal of Marine Science and Application, 2017

[20]	Wetdeck slamming loads on a developed catamaran hullform–experimental investigation
	Ships and Offshore Structures, 2016

[21]	Application of IMPS Method in a Ship Bow Section Entering Water Problems
	2016

[22]	Comparative study on water impact problem
	2016

[23]	Prediction of slamming loads on catamaran wetdeck using CFD
	FAST 2015, 2015

[24]	Seakeeping Committee
	2014

[25]	Numerical Investigation of Water Slamming Loads on Wave-Piercing Catamaran Hull Model
	HSMV2014 10th Symposium on High Speed Marine Vehicles, 2014

[26]	Seakeeping Committee-Final Report and Recommendations to the 27th ITTC
	27th ITTC Conference (Copenhagen 2014), 2013

[1]	Analysis of fluid dynamic behavior and impact load on oblique water entry of a two-dimensional seaplane based on VOF method Ocean Engineering, 2023 DOI:10.1016/j.oceaneng.2023.114028

[2]	Conceptualising a Hybrid Flying and Diving Craft Journal of Marine Science and Engineering, 2023 DOI:10.3390/jmse11081541

[3]	Numerical investigation into water entry problems of a flat plate with air pockets Journal of Ocean Engineering and Science, 2023 DOI:10.1016/j.joes.2022.04.011

[4]	Numerical investigation on the water entry of a 2D seaplane section with heel angles Ocean Engineering, 2022 DOI:10.1016/j.oceaneng.2022.112236

[5]	Numerical investigation into water entry problems of a flat plate with air pockets Journal of Ocean Engineering and Science, 2022 DOI:10.1016/j.joes.2022.04.011

[6]	Numerical investigation on the water entry of a 2D seaplane section with heel angles Ocean Engineering, 2022 DOI:10.1016/j.oceaneng.2022.112236

[7]	CFD modelling and grid uncertainty analysis of the free-falling water entry of 2D rigid bodies Applied Ocean Research, 2021 DOI:10.1016/j.apor.2021.102813

[8]	CFD modelling and grid uncertainty analysis of the free-falling water entry of 2D rigid bodies Applied Ocean Research, 2021 DOI:10.1016/j.apor.2021.102813

[9]	Numerical simulation on the water entry of bow-flare section considering bulbous bow Ocean Engineering, 2020 DOI:10.1016/j.oceaneng.2020.107081

[10]	Performance comparison of ordinary-chine wedges with flat-chine wedges in water entry problem Ships and Offshore Structures, 2019 DOI:10.1080/17445302.2019.1667129

[11]	Numerical simulation of vertical water impact of asymmetric wedges by using a finite volume method combined with a volume-of-fluid technique Ocean Engineering, 2018 DOI:10.1016/j.oceaneng.2018.04.043

[12]	Numerical study on the water entry of curved wedges Ships and Offshore Structures, 2018 DOI:10.1080/17445302.2018.1471776

[13]	Wetdeck slamming loads on a developed catamaran hullform – experimental investigation Ships and Offshore Structures, 2017 DOI:10.1080/17445302.2016.1194555

[14]	Review of ship slamming loads and responses Journal of Marine Science and Application, 2017 DOI:10.1007/s11804-017-1437-3

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

World Journal of Mechanics

World Journal of Mechanics

Journals Menu

Home

About SCIRP

Service

Policies