Structural Modification of Sand Cast Eutectic Al-Si Alloys with Sulfur/Sodium and Its Effect on Mechanical Properties

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

World Journal of Engineering and Technology

ISSN Print: 2331-4222
ISSN Online: 2331-4249
www.scirp.org/journal/wjet
E-mail: wjet@scirp.org

Google-based Impact Factor: 0.80
Citations h5-index & Ranking*

Journals Menu

"Structural Modification of Sand Cast Eutectic Al-Si Alloys with Sulfur/Sodium and Its Effect on Mechanical Properties"
written by Chikezie W. Onyia, Boniface A. Okorie, Simeon I. Neife, Camillus S. Obayi,
published by World Journal of Engineering and Technology, Vol.1 No.2, 2013

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Effect of Silicon Content on wear and Hardness of Al-Si Alloys
	2021

[2]	Desenvolvimento de ligas de alumínio recicladas contendo a fase primária Al (Fe, TM) Si aproximante de quasicristal: controle da microestrutura visando aplicações …
	2021

[3]	Desgasificación con NaCl: Un método para incrementar las propiedades mecánicas de una aleación de aluminio A 319
	… y Ciencia: de la …, 2020

[4]	Упрочнение земляных отливок из бинарных заэвтектических силуминов
	2020

[5]	A State-of-the-Art Review on Manufacturing and Additive Influences on Sand-Cast Components
	2019

[6]	Effect of combinative addition of Ti and Sr on modification of AA4043 welding wire and mechanical properties of AA6082 welded by TIG welding
	Transactions of Nonferrous Metals Society of China, 2017

[7]	Effect of High Temperature Exposure on the Mechanical Properties of Self-Hardening Al-Based Alloy
	Materials Science Forum, 2017

[8]	The effect of Sr modification on thermal diffusivity of Al–8Si alloy
	Food Additives & Contaminants Part A, 2017

[9]	Effect of Si content on machinability of Al-Si alloys
	2017

[10]	Assessment of circumferential cracks in hypereutectic Al-Si clutch housings
	Case Studies in Engineering Failure Analysis, 2016

[11]	Desenvolvimento de camadas ricas no intermetálico α-Alx (Fe, Mn, Cr) ySiz em ligas Al-Si por solidificação controlada
	2016

[12]	DESENVOLVIMENTO DE CAMADAS RICAS NO INTERMETÁLICO
	2016

[13]	Effect of Rare Earth Metals on the Microstructure of Al-Si Based Alloys
	Materials, 2016

[14]	Effects of Innovative Processing on the Mechanical Properties of 3XXX Aluminum Alloy
	2016

[15]	EFFECT OF SILICON CONTENT ON MACHINABILITY OF Al-Si ALLOYS
	Advances in Science and Technology Research Journal, 2016

[16]	The Effect of Strontium Modification on T6 Heat Treatment Parameters, Microstructure and Hardness of Aluminum Silicon-A356 Alloy
	Journal of Materials and Metallurgical Engineering, 2016

[17]	The effect of strontium modification on T6 heat treatment parameters, microstructure and hardness of aluminum silicone-A356 alloy
	JoMME, 2016

[18]	Use of sodium salt electrolysis in the process of continuous modification of eutectic EN AC-AlSi 1 2 alloy
	Bulletin of Materials Science, 2015

[19]	Brittle Failure of Hypereutectic Al–Si Alloy Component
	Journal of Failure Analysis and Prevention, 2015

[20]	Influence of Various Additional Elements in Al Based Filler Alloys for Automotive and Brazing Industry
	Journal of Welding and Joining, 2015

[21]	Use of sodium salt electrolysis in the process of continuous modification of eutectic EN AC-AlSi12 alloy
	2015

[22]	Case Studies in Engineering Failure Analysis
	2014

[23]	Microstructures and Mechanical Properties of In Situ Al2O3/Al-Si Composites Fabricated by Reaction Hot Pressing
	Metallurgical and Materials Transactions. Springer, 2014

[24]	Modification of Al-Si Alloy (LM 28) By MnO2 Addition
	International Journal of Emerging Technology and Advanced Engineering, 2014

[25]	New approaches to casting hypereutectic Al-Si alloys to achieve simultaneous refinement of primary silicon and modification of eutectic silicon
	2013

[1]	Tensile Properties Enhancement Response of A413 and A356 Aluminum Casting Alloys to Direct Water Spray Processing International Journal of Metalcasting, 2024 DOI:10.1007/s40962-023-01045-2

[2]	Enhancing microstructure and mechanical properties of nickel aluminium bronze alloy through tin addition Scientific Reports, 2023 DOI:10.1038/s41598-023-44146-y

[3]	Tensile Properties Enhancement Response of A413 and A356 Aluminum Casting Alloys to Direct Water Spray Processing International Journal of Metalcasting, 2023 DOI:10.1007/s40962-023-01045-2

[4]	Effect of Silicon Content on wear and Hardness of Al-Si Alloys IOP Conference Series: Materials Science and Engineering, 2021 DOI:10.1088/1757-899X/1065/1/012010

[5]	A State-of-the-Art Review on Manufacturing and Additive Influences on Sand-Cast Components Arabian Journal for Science and Engineering, 2019 DOI:10.1007/s13369-019-04139-4

[6]	Assessment of circumferential cracks in hypereutectic Al-Si clutch housings Case Studies in Engineering Failure Analysis, 2017 DOI:10.1016/j.csefa.2016.11.003

[7]	Effect of combinative addition of Ti and Sr on modification of AA4043 welding wire and mechanical properties of AA6082 welded by TIG welding Transactions of Nonferrous Metals Society of China, 2017 DOI:10.1016/S1003-6326(17)60031-1

[8]	The effect of Sr modification on thermal diffusivity of Al–8Si alloy International Journal of Cast Metals Research, 2017 DOI:10.1080/13640461.2017.1367115

[9]	Effect of Rare Earth Metals on the Microstructure of Al-Si Based Alloys Materials, 2016 DOI:10.3390/ma9010045

[10]	Influence of Various Additional Elements in Al Based Filler Alloys for Automotive and Brazing Industry Journal of Welding and Joining, 2015 DOI:10.5781/JWJ.2015.33.5.1

[11]	Brittle Failure of Hypereutectic Al–Si Alloy Component Journal of Failure Analysis and Prevention, 2015 DOI:10.1007/s11668-015-9996-6

[12]	Use of sodium salt electrolysis in the process of continuous modification of eutectic EN AC-AlSi 1 2 alloy Bulletin of Materials Science, 2015 DOI:10.1007/s12034-015-0875-2

[13]	Microstructures and Mechanical Properties of In Situ Al2O3/Al-Si Composites Fabricated by Reaction Hot Pressing Metallurgical and Materials Transactions B, 2014 DOI:10.1007/s11663-014-0203-z

[14]	Microstructures and Mechanical Properties of In Situ Al2O3/Al-Si Composites Fabricated by Reaction Hot Pressing Metallurgical and Materials Transactions B, 2014 DOI:10.1007/s11663-014-0203-z

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

World Journal of Engineering and Technology

World Journal of Engineering and Technology

Journals Menu

Home

About SCIRP

Service

Policies