Author(s)

Ambran Hartono, Suparno Satira, Mitra Djamal, Ramli Ramli, Herman Bahar, Edi Sanjaya

Department of Physics, Faculty of Mathematics and Natural Sciences, Universitas Negeri Padang, Padang, Indonesia.
Department of Physics, Faculty of Science and Technology, Islamic State University Syarif Hidayatullah, Jakarta, Indonesia.
Theoretical High Energy Physics and Instrumentation Research Group, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Bandung, Indonesia.

Fabrication of PVDF films has been making using Hot Roll Press. Preparation of samples carried out for nine different temperatures. This condition is carried out to see the effect of temperature fabrication on electrical properties and crystallite size of PVDF films. The electrical properties like as surface resistivity are discussion focus in this paper. Surface resistivity properties of PVDF can be improved by mechanical treatment on the varying film thickness and the temperature. To obtain the diffraction pattern of sample characterization is performed using X-Ray Diffraction. Crystallite size of PVDF films calculate from broadening pattern of X-Ray Diffraction. Furthermore, from the diffraction pattern calculated β fraction and crystallite size, for calculation to determine the crystallite size of the sample by using the Scherrer equation. Has been obtained an increase piezoelectric properties of PVDF films that characterized by increasing β fraction. Have been obtained β fraction increased from 25.4% up to 44% for temperatures of 130°C up to 170°C, respectively. Resistivity value has been obtained at temperature 130°C up to 170°C, decreased from 1.23 × 10⁴ Wm up to 0.21 × 10⁴ Wm respectively. From the experimental results and the calculation of crystallite sizes obtained for the samples with temperature 130°C up to 170°C respectively are increased from 7.2 nm up to 20.54 nm. These results indicate that mechanical treatment caused increase β fraction and decrease surface resistivity. Increasing temperatures will also increase the size of the crystallite of the sample. This happens because with the increasing temperature causes the higher the degree of crystallization of PVDF film sample is formed, so that the crystallite size also increases.

Crystallite Size; PVDF; Roll Hot Press; Scherrer Equation; Surface Resistivity; Temperature Different; XRD

A. Hartono, S. Satira, M. Djamal, R. Ramli, H. Bahar and E. Sanjaya, "Effect of Mechanical Treatment Temperature on Electrical Properties and Crystallite Size of PVDF Film," Advances in Materials Physics and Chemistry, Vol. 3 No. 1, 2013, pp. 71-76. doi: 10.4236/ampc.2013.31011.