Single VDVTA-Based Voltage-Mode Biquad Filter - Circuits and Systems

CS > Vol.6 No.3, March 2015

Single VDVTA-Based Voltage-Mode Biquad Filter ()

HTML XML

Download as PDF (Size: 525KB) PP. 55-59

DOI: 10.4236/cs.2015.63006 4,007 Downloads 5,025 Views Citations

Author(s)

Ghanshyam Singh¹, Dinesh Prasad^2*, D. R. Bhaskar²

Affiliation(s)

¹Department of Electronics and Communication Engineering, HMRITM, Hamidpur, Delhi, India.
²Department of Electronics and Communication Engineering, Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi, India.

ABSTRACT

In this paper, an application of voltage differencing voltage transconductance amplifier (VDVTA) in the realization of voltage-mode (VM) multi-input single output (MISO) type biquad is presented. The proposed topology uses one VDVTA as an active element, two capacitors and a grounded resistor. The configuration realizes low pass (LP), high pass (HP), band pass (BP) and notch (BR) filters without the requirement of any matching condition. The natural frequency (w₀) and bandwidth (BW) are independently controllable. The proposed circuit offers low active and passive sensitivities of w₀. The operation of the proposed circuit has been verified through SPICE simulation with TSMC CMOS 0.18 μm process parameters.

KEYWORDS

Voltage Differencing Voltage Transconductance Amplifier, Analog Filter, LP, HP, BP, BR, Voltage Mode

Share and Cite:

Singh, G. , Prasad, D. and Bhaskar, D. (2015) Single VDVTA-Based Voltage-Mode Biquad Filter. Circuits and Systems, 6, 55-59. doi: 10.4236/cs.2015.63006.

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journals Menu

Home

About SCIRP

Service

Policies