[1]
|
Barsoum, M. (1997) Fundamentals of Ceramics. McGraw Hill Incorporated, Singapore p410
|
[2]
|
Unal, A. (1986) Trans Institute of Metallurgy Section C. 95, p179.
|
[3]
|
Furnass, C.C. (1928) The Relationship Between Specific Voids and Size of Compression In System of Broken Solid of Mixed Size US Bureau Report Investigation Vol. 2894 p 321-340.
|
[4]
|
Singer, F., Singer, S.S. (1963) Industrial Ceramics, University Press Cambridge p44.
|
[5]
|
Nwoye, C. I. (2003) Investigating the Influence of Particle Size and Size Distribution on the Physical and Mechanical Properties of Ceramic Materials. A Project Report p5-8, 16-22.
|
[6]
|
Viewey, F., Larrly, P. (1978) Ceramic Processing Before Firing, John-Wiley and Sons, New York, p3-8.
|
[7]
|
Arisa, U. S. (1997) Effect of Initial Particle Size and Size Distribution on Physical and Mechanical Properties of Some Nigeria Clays Sintered at 1200℃. A Thesis Report, p3,15-18
|
[8]
|
Nwoye, C. I. (2009) Studies on Pore Deformation Mechanism in Particles J. Eng. Appl. Sc.(in press)
|
[9]
|
Nwoye, C. I. (2008) Effect of Porosity on the Shrinkage Behaviour of Ukpor and Nsu Clays. J. Eng. Appl. Sc., 3(1, 2): 27-30.
|
[10]
|
Reed, J. (1988) Principles of Ceramic Processing, Wiley Interscience Publication, Canada p470-478.
|
[11]
|
Keey, R.B., (1978) Introduction to Industrial Drying Operations, Pergamon Press, Elmsford, New York. p132-157.
|
[12]
|
Nwoye, C. I. (2008) Mathematical Model for Computational Analysis of Volume Shrinkage Resulting from Initial Air-Drying of Wet Clay Products. Int. Res. J. Eng. Sc. & Tech. 5(1):82-85.
|
[13]
|
Nwoye, C. I., Iheanacho, I. O., Onyemaobi, O. O. (2008) Model for the Evaluation of Overall Volume Shrinkage in Molded Clay Products from Initial Air-Drying Stage to Completion of Firing. Int. J. Nat. Appl. Sc. 4(2): 234-238.
|
[14]
|
Nwoye, C. I. (2009) Model for Calculating the Quantity of Water Lost by Evaporation
during Oven Drying of Clay. Researcher, 1(3): 8-13.
|
[15]
|
Nwoye, C. I., Okeke, K., Obi, M., Nwanyanwu, U., Ofoegbu, S. (2009) Model for Predictive Analysis of the Quantity of Water Evaporated during the Primary-Stage Processing of Bioceramic Material Sourced from Kaolin. J. Nat. Sc. 7(4): 79-84.
|
[16]
|
Nwoye, C. I., Nwakwuo, C. C., Obi, M. C., Obasi, G. C., Onyemaobi, O. O. (2009) Model for Quantifying the Extent and Magnitude of Water Evaporated during Time Dependent Drying of Clay. New York J. Sc. 2(3): 55-58.
|
[17]
|
Nwoye, C. I. (2007). SynchroWell Research Work Report, DFM Unit, No 20072002, p67-80.
|