Share This Article:

Balanites aegyptiaca Oil Synthesized Iron Oxide Nanoparticles: Characterization and Antibacterial Activity

Full-Text HTML XML Download Download as PDF (Size:1730KB) PP. 154-165
DOI: 10.4236/jbnb.2016.73016    1,801 Downloads   2,511 Views   Citations

ABSTRACT

Antibacterial activity of iron oxide nanoparticles, an employing B. aegyptiaca oil (L.) Del., was used as natural stabilizer by modifying a co-precipitation method. In this work, we chose B. aegyptiaca oil as the new surfactant coating agent, and synthesized B. aegyptiaca oil coating with iron oxide nanoparticles which were characterized with a variety of methods, including Gas Chromatography (GC) to determine the fatty acids composition of the seeds oil, Fourier Transform-Infrared Spectroscopy (FTIR), Transmission Electron Microscopy (TEM) equipped with Energy Dispersive Spectroscopy (EDS), X-ray Powder Diffractometer (XRD) and Vibrating Sample Magnetometer (VSM). In antibacterial studies, disk diffusion susceptibility test was used to measure efficacy of iron oxide nanoparticles against Gram-positive bacteria Staphylococcus aureus (S. aureus), Bacillus subtilis (B. subtilis) and Gram-negative bacteria Escherichia coli (E. coli) in terms of zone inhibition. The B. aegyptiaca coated on the surface of iron oxide nanoparticles; its particle size was found to be nanoscale below 50 nm, and the magnetization (δs) was 16.975 emu g-1. Antibacterial activity was measured. Efficacy of iron oxide nanoparticles against bacterial strains was found in Escherichia coli (E. coli). All these findings suggest that the nanoparticles synthesized from B. aegyptiaca oil may be a promising reagent for a wide variety of applications in biological fields as well as in nanomedicine.

Received 3 May 2016; accepted 27 June 2016; published 30 June 2016

1. Introduction

Nanotechnology had an enormous impact on medical technology, significantly improving the activity, specificity, bioavailability and therapeutic index of various natural products [1] . Therefore, by using nanoscale carriers, the therapeutic value of natural products can be drastically improved [2] . Lately, plant oil extracts are being used as a process for the synthesis of iron oxide nanoparticles that may find very important place in antibacterial activity. With the prevalence and increase of microorganisms resistant to multiple antibiotics and the continuing emphasis on healthcare costs, many researchers have tried to develop new, effective antimicrobial reagents. In the past two decades, some studies have shown that antimicrobial formulations in the form of nanoparticles could be used as effective bactericidal materials because of their high surface-to-volume ratio and novel physical and chemical properties on the nanoscale level [3] . Over the past decade, iron oxide nanoparticles have been extensively studied in biomedical applications because of their unique properties, such as easy handling, low cytotoxicity, good biocompatibility, relatively low cost and eco-friendly performance [4] .

Recently; magnetic antimicrobial nanoconposites have received special attention due to the recyclable and localizing properties of magnetic nanoparticles. Magnetic silver nanocomposites are the most studied matrix as antimicrobial agents. Bifunctional Fe3O4@Ag nanoparticles with both superparamagnetic and antibacterial properties were prepared, and the nanocomposites showed antibacterial performance against E. coli, Staphylococcus epidermidis (S. epidermidis) and B. subtilis [5] . A stable aqueous suspension of Fe3O4@Ag was developed by Chudasama and co-workers, and the nanocomposites displayed antibacterial activity against both Gram- negative and Gram-positive organisms [6] . Also tested human fibroblasts incubated with magnetic nanoparticles showed that lactoferrin and ceruloplasmin coated nanoparticles adhered to the cell surface whereas plain uncoated particles were found to be phagocytosed by the cells [7] .

Balanites aegyptiaca (L.) Del., (Zygophyllaceae), is locally known Hegleig tree and its fruits are called lal’loub; it is also known as Desert date in English. The tree is found in stretching from arid and semi-arid regions to sub-humid of tropical savannas of African countries, all over the Sahel and on many sites of the Sudan savanna, extending from the Atlantic coastline of Senegal to the Red Sea and Indian Ocean and the Arabian Peninsula [8] . It is widely used, in traditional medicine, to treat infectious diseases, psychoses, epilepsy, jaundice and rheumatism [9] . In addition, it is an important component of many popular preparations due to its antidiabetic, antiseptic, antimalarial, antisyphilitic and antiviral (Herpes zoster) activity [10] [11] . The fixed oil from the fruits had shown anticancer activity against lung, liver and brain human carcinoma cell lines [12] . The same study reported remarkable antimicrobial activity for the fixed oil against selected strains of Gram-positive and Gram-negative bacteria as well as antiviral activity against Herpes simplex virus [12] . Balanitis aegyptiaca oil is a fatty acid which is used for controlling the tendency of precipitation and agglomeration of the hydroxide precursors on the morphology of the iron oxide nanoparticles; also the purpose of natural B. aegyptiaca oil is to enhance the biocompatibility. The stabilization of magnetic nanoparticle dispersions can be obtained by adsorbing the surfactants on the surface of the particles [13] . Stable aqueous magnetic nanoparticles’ dispersions are produced with various saturated and unsaturated fatty acids as primary and secondary surfactants [14] [15] .

This study aims to explore the efficacy of magnetic iron oxide nanoparticles (Fe3O4) synthesized with B. aegyptiaca oil (L.) Del., as novel reagent to detect the bacteria strains. Three representative bacteria typically recommended for use in antimicrobial assays, i.e., Staphyloccous aureus (S. aureus), Bacillus subtilis (B. subtilis) and Escherichia coli (E. coli) were used. The antibacterial effect was quantized based on the inhibition zone measured in the disk diffusion tests conducted in plates.

2. Experimental

2.1. Plant Material Preparation and Characterization

The fruits of B. aegyptiaca were harvested from Central of Sudan-Eldamazen. The kernels of the fruits were separated and powdered using a mortar and pestle. 200 gm of B. aegyptiaca seeds weighed and packed in soxhlet apparatus. The powdered seeds were extracted with petroleum ether 40˚C - 60˚C. The solvent was then collected and evaporated under reduced pressure using rotary evaporator apparatus. The petroleum ether extract yielded pale yellow colour oil which was then stored in dark bottles at room temperature till use [16] .

2.2. Fatty Acid Composition of Seeds Oil of B. aegyptiaca

The triglycerides of the B. aegyptiaca oil trans-esterified using the following procedures [17] [18] . Typically, the oil (1 ml) was diluted by 1 ml of hexane. Then 6 ml of NaOH (0.5 M) in methanol were added. The mixture was refluxed for 2 - 3 min. Next, 6 ml of H2SO4 1% were added and shook well-over night, followed by the addition of 2 ml of hexane and shook after that saturated NaCl was added. Then to the upper layer (hexane) a few amount of Na2SO4 was added. After decantation the fatty acids composition was determined using gas chromatography (GC-2010, SHIMADZU-Japan).

2.3. Co-Precipitation Synthesis of B. aegyptiaca Oil/Fe3O4 Nanoparticles

Iron oxide nanoparticles were prepared by a co-precipitation method with the addition of B. aegyptiaca oil as a surfactant. Typically, 50 ml of 1 M solution FeCl3・6H2O and 50 ml of 2 M FeSO4・7H2O were mixed and dissolved in deionized water. Then 3 M of Sodium hydroxide were added into the above solution and the pH value was maintained between 10 - 11 with continuous stirring for 30 minutes and a dark precipitate was formed. 2 ml of B. aegyptiaca oil were heated to 70˚C under nitrogen atmosphere and added in the above solution with continuous stirring for 3 h at 80˚C. After that, the magnetic precipitate was isolated from the solvent by a permanent magnet, which then washed several times with distilled water and ethanol in sequence. Finally it was dried at 50˚C for 24 h and grinded to fine powder.

2.4. Physicochemical Characterization

2.4.1. Gas Chromatography (GC) Conditions

The fatty acids in the oil of B. aegyptiaca were analyzed on a Shimadzu gas chromatography 2010 equipped with flame ionization detector (FID). Fatty acids were separated using an INNOWax capillary column (0.25 mm i.d. 30 m in length, 0.25 µm film thicknesses). The carrier gas was hydrogen at flow rate of 40 ml min−1, with air 400 ml min−1 and makeup gas of Helium at 30 ml min−1. The column temperature was programmed at 3˚C min−1 to 250˚C with initial temperature of 100˚C. The injector was set at 230˚C with split ratio of 50:1 and the detector was set at 250˚C (Table 1).

2.4.2. Transmission Electron Microscopy (TEM)

Transmission electron microscopy was used to determine the morphology, size and structure of the magnetite particles (FEI TECNAI G2 operating at 300 kV). The sample dispersions were drop-cast onto the copper grids separately. X-ray energy-dispersive spectroscopy (EDS) was used to determine the elemental composition and purity of the sample by atom percentage of metal, elemental analysis on single particles was carried out using EDS attachment equipped with TEM.

2.4.3. Vibrating Sample Magnetometer

Magnetization curves for the coated cells were obtained with a vibrating sample magnetometer (VSM, Lanzhou University, Lakeshore 730, America).

2.4.4. Fourier Transform Infra Red Spectroscopy (FTIR)

FTIR spectra of the dried powder iron oxide nanoparticles were obtained using a Bruker Vertex 70 FT-IR spectrophotometer and KBr method.

2.4.5. X-Ray Diffraction (XRD)

X-ray diffraction (XRD) measurements were carried out at room temperature using a BRUKER D8 ADVANCE

Table 1. Gas chromatograph of B. aegyptiaca oil. The table shows the quantitative composition of the oil.

X-ray powder diffractometer with Cu-K radiation (λ = 1.5406˚A) in the 2θ range of 10˚C to 80˚C.

2.5. Antibacterial Activity

In antibacterial studies, agar well disk diffusion susceptibility test was used to measure efficacy of iron oxide nanoparticles against Gram-positive bacteria Staphylococcus aureus (S. aureus), Bacillus subtilis (B. subtilis) and Gram-negative bacteria Escherichia coli (E. coli) in bacterial sensitivity to antibiotics is commonly tested using a disk diffusion test, employing antibiotic impregnated disks [19] . A similar test with nanoparticles laden disks was used in this study. Briefly, A 5 ml suspension of nanoparticles (5 mg ml−1) was sonicated and subsequently filtered through a membrane filter (0.2 µm, 47 mm diameter). The nanoparticles laden filter paper was dried in an oven for 1 h and small disks of uniform size (6 mm diameter) containing 100 ± 15 µg nanoparticles were punched out and stored in a desiccators at room temperature. The bacterial suspension (100 µl of 104 - 105 CFU ml−1) was applied uniformly on the surface of a beef agar plate before placing the disks on the plate (3 per plate). The plates were incubated at 35˚C for 24 h, after which the average diameter of the inhibition zone surrounding the disk was measured with a ruler with up to 1 mm resolution terms of zone inhibition [20] .

3. Result and Discussion

Synthesis and characterization of magnetite nanoparticles (MNP) of B. aegyptiaca oil.

3.1. Chemical Composition of B. aegyptiaca Oil

In order to determine the fatty acids composition of B. aegyptiaca seed oil gas chromatography analysis of the petroleum ether extract of the seed oil revealed the presence of stearic acid M. (66.9%%), Cis-10-Heptadecenoic acid (22.5%), oleic acid (8.3%) and palmitic acid (2.1%). The fatty acids composition of B. aegyptiaca seed oil is presented in Figure 1. The chromatograms of B. aegyptiaca oil are composed of essentially four carboxylates, corresponding to four fatty acid. Cis-10-Heptadecenoic acid (17:1) has long been recognized as minor constituent of ruminant fats and its isomeric definition remains undefined in most reports on ruminant milk and intramuscular fat [21] [22] . Recently it was proposed, along with other odd-chain fatty acids, as a potential marker of microbial biomass [23] .

Figure 1. Chromatogram of B. aegyptiaca oil analyzed by gas chromatography.

3.2. Transmission Electron Microscopy (TEM)

Transmission electron microscopy allows obtaining information about the shapes and sizes of the particles. Figure 2 shows the TEM images and histogram of the size distribution of the magnetite particles with and without B. aegyptiaca oil coating. Figure 2(a) denotes presence of agglomeration of the particles in pure Fe3O4, while Figure 2(b) shows each particle separated from the neighbors because of the organic chain absorbed on its surface of iron oxide nanoparticles. Surfactant molecules (also called stabilizing agents) are attached to the nanoparticle surface, preventing clotting and providing the desired dispersion and surface properties. It is well known that magnetic Fe3O4 prepared by the co-precipitation method has a large number of hydroxyl groups on its surface in contact with the aqueous phase. The OH groups on the surface of Fe3O4 particles react readily with carboxylic acid head groups of oil fatty acids molecules. Excess fatty acids on oil of B. aegyptiaca and then adsorbed the fatty acids to form as hydrophobic shell [24] . The size and shape of magnetite nanoparticles may vary depending on the nature and concentration of the stabilizing agent [25] . The size of bare Fe3O4 nanoparticles is 29 nm with a dominant population at 5 - 10 nm and the size of nanoparticles coated B. aegyptiaca oil is 35 nm with a dominant population at 11 - 12 nm. The nanoparticles coated B. aegyptiaca oil has a size slightly higher than the nanoparticles without B. aegyptiaca. A mean size of samples was calculated by programme nano measurer 1.2.

Figure 2. TEM micrographs of (a) the magnetite Fe3O4 and (b) B. aegyptiaca oil coated magnetite and the corresponding histograms (c) and (d).

3.3. X-Ray Energy-Dispersive Spectroscopy Analysis (EDS)

Figure 3 shown the composition of the Fe3O4 with B. aegyptiaca was confirmed by X-ray EDS microanalysis of the analyzed point. The presence of Fe and O can be observed, with iron abundance higher than oxygen signals that indicate oil coating and surrounding iron oxide nanoparticles. Moreover, together with Fe and O ones, the copper signal is present because of the copper grids used for sample preparation, in which traces of Cu are present, as reported by the manufacturer. The C signals are attributed mainly to organic molecules (fatty acid) in B. aegyptiaca oil.

3.4. Vibrating Sample Magnetometer

The magnetic properties of the B. aegyptiaca coated Fe3O4 nanoparticles were investigated with a vibrating sample magnetometer at 300 k. Figure 4 is shown the magnetic hysteresis loop at 300 k. The saturation magnetization (Ms), remanence (Mr), coercivity (Hc) and loop squareness ratio (Mr/Ms) of B. aegyptiaca coated iron oxide nanoparticles is shown in Table 2. The coated sample had a higher Ms but a lower Mr, Hc and Mr/Ms. The increase in magnetization of the coated sample is probably due to the nanoparticles, spinal structure, confirmed that the good paramagnetic property of the resulting sample at room temperature [26] .

3.5. Infrared Spectrum of B. aegyptiaca Oil

To understand the adsorption spectrum of the B. aegyptiaca oil on the surface of Fe3O4 nanoparticles, infrared measurements were carried out on the B. aegyptiaca oil, pure Fe3O4 and the composite Fe3O4 nanoparticles coated with B. aegyptiaca oil. Figure 5 shows the typical IR spectrum of the B. aegyptiaca oil. The functional groups present in the ester B. aegyptiaca oil are explained as follows: The vibration caused by C-H stretching could be found at wavelength around 3000 cm−1 (Figure 5(c)). This indicates the presence of aliphatic hydrocarbons. Between 1600 and 1800 cm−1 another distinctive peak could be noticed. This is C=O, i.e. carbonyl group, which could account for the carboxylic acid of B. aegyptiaca oil. Lastly, C-O ether groups can be seen between 1000 and 1100 cm−1.

In Figure 5(c) two sharp bands at 2955 and 2852 cm−1 were attributed to the asymmetric CH2 stretch and the symmetric CH2 stretch, respectively which were not found in the pure Fe3O4. The intense peak at 1745 cm−1 was

Figure 3. X-ray energy-dispersive spectroscopy analysis (EDS) (a) pure Fe3O4 (b) Fe3O4 B. aegyptiaca oil. EDS spectra showing elemental composition analysis of Fe3O4 nanoparticles.

Figure 4. Magnetization curves for the B. aegyptiaca oil coated of Fe3O4 determined with a vibrating sample magnetometer. σs, saturation magnetization; emu, electromagnetic unit; Oe, Oersted.

Figure 5. FTIR spectra of (a) pure Fe3O4; (b) Fe3O4 coated with B. aegyptiaca oil and (c) B. aegyptiaca oil.

Table 2. Magnetic properties of the B. aegyptiaca oil coated of Fe3O4.

derived from the existence of the C=O stretch and the band at 1346 cm−1 exhibited the presence of the C-O stretch. The O-H in-plane and out-of-plane bands appeared at 1462 and 955 cm−1, respectively. In the Figure 5(b), the asymmetric CH2 stretch and the symmetric CH2 shifted to 2916 and 2850 cm−1, respectively. The surfactant molecules in the adsorbed state were subjected to the field of the solid surface. As a result, the characteristic bands shifted to a lower frequency region which indicated that the hydrocarbon chains in the monolayer surrounding the nanoparticles were in a closed-packed, crystalline state [27] . Which were characteristic of the asymmetric in as (COO?) and the symmetric in s (COO?) stretch, instead. This result can be explained that the bonding pattern of the carboxylic acids on the surface of the nanoparticles was a combination of molecules bonded symmetrically and molecules bonded at an angle to the surface [28] . The characteristic band for pure Fe3O4 usually appears at 570 cm−1, whereas the present sample was shifted to 579 cm−1. This can be explained as the carboxyl groups of B. aegyptiaca oil combined with the Fe atoms on the surface of the Fe3O4 nanoparticles and render a partial single bond character of the C=O bond to weaken the bond, and then shift the stretching frequency to a lower value [29] .

3.6. X-Ray Diffraction (XRD)

The crystallinity of the magnetic nanoparticles was investigated by powder XRD (Figure 6). Both Fe3O4 and Fe3O4 B. aegyptiaca oil nanoparticles exhibit six characteristic peaks at 2θ = 30.1, 35.3, 43.6, 53.6, 57.3 and 62.8, indexed as (220), (311), (400), (422), (511) and (440), respectively. The peak positions and relative intensities of the nanoparticles match well with those from JCPDS card 19-0629 for magnetite [30] , All the reflections in the pattern can be indexed from those of a standard sample of the Fe3O4 spinel structure [JC-PDS card No: 26-1136], indicating that the pure Fe3O4 has been obtained [31] .

3.7. Antibacterial Activity Study

Antimicrobial activity of B. aegyptiaca synthesized iron oxide nanoparticles suspension was tested against different gram positive (Staphylococcus aureus, Bacillus subtilis) and gram negative Escherichia coli (E. coli). It was shown in Figure 7 moderate activities against most of the tested microorganisms. The antimicrobial activity test of the fixed oil against selected strains of Gram-positive and negative was shown the highest activity on the gram positive bacteria. While B. aegyptiaca oil didn’t shown any result for gram negative bacteria, in contrasted it was shown highest antimicrobial activity against gram negative bacteria when used Fe3O4 with B. aegyptiaca oil and no result in gram positive bacteria these results are consistent with recent reports the bacitracin-conjug- ated Fe3O4@PAA nanoparticles also shown antibacterial ability towards Gram-negative E. coli bacteria [30] . The antimicrobial activity of this nanoparticles synthisezed by oil Fe3O4 is less than standard B. aegyptiaca oil that as reflected by lower size of the inhibition zone. The inhibition zones were calculated and taken as the measure of the inhibitory power of the oil [32] . The picture was shown that the oil at the tested dose of 10 μl/disk had antimicrobial activity with maximum inhibition zone against Staphyloccous aureus (S. aureus) compared with Fe3O4-B. aegyptiaca with maximum inhibition against Escherichia coli (E. coli).

4. Conclusion

Magnetite nanoparticles were successfully synthesized and coated with B. aegyptiaca oil to obtain stable suspensions in hexane without the need of external stabilizing agents. The B. aegyptiaca magnetic nanoparticles displayed antibacterial activity against Gram-negative bacterial strains compared with B. aegyptiaca oil itself, and the B. aegyptiaca oil had antimicrobial activity against Gram-positive bacteria. The results confirmed that Balanites aegyptiaca (L). Del. fixed oil has great potential as medicinal oil beside its use as edible oil. Due to the antibacterial effect and magnetism, the B. aegyptiaca synthesized magnetic nanoparticles may have a promising reagent for a wide variety of biological applications as well as in nanomedicine.

Figure 6. XRD patterns of (a) Fe3O4 pure and (b) Fe3O4 B. aegyptiaca oil nanoparticles.

Figure 7. Representative images of agar plates containing B. aegyptiaca oil (a) Staphy- loccous aureus; (b) Bacillus subtilis; (c) pure iron oxide nanoparticles and (d) iron oxide nanoparticles with B. aegyptiaca oil impregnated disks and diameter of inhibition zone for Escherichia coli.

Acknowledgements

This work was supported by the Natural Science Foundation of China (Grant Nos. 21327005, 21175108); the Program for Chang Jiang Scholars and Innovative Research Team, Ministry of Education, China (Grant No. IRT1283); the Program for Innovative Research Group of Gansu Province, China (Grant No. 1210RJIA001).

NOTES

*Corresponding author.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

Gasmalla, H. , Idris, A. , Shinger, M. , Qin, D. , Shan, D. and Lu, X. (2016) Balanites aegyptiaca Oil Synthesized Iron Oxide Nanoparticles: Characterization and Antibacterial Activity. Journal of Biomaterials and Nanobiotechnology, 7, 154-165. doi: 10.4236/jbnb.2016.73016.

References

[1] Baimark, Y. (2012) Preparation of Surfactant-Free Linear and Star-Shaped Poly(l-lactide)-b-methoxy Polyethylene Glycol Nanoparticles for Drug Delivery. Journal of Applied Sciences, 12, 263.
http://dx.doi.org/10.3923/jas.2012.263.270
[2] Sahoo, S.K. and Labhasetwar, V. (2003) Nanotech Approaches to Drug Delivery and Imaging. Drug Discovery Today, 8, 1112-1120.
http://dx.doi.org/10.1016/S1359-6446(03)02903-9
[3] Ghavamzadeh, R., Haddadi-Asl, V. and Mirzadeh, H. (2004) Bioadhesion and Biocompatibility Evaluations of Gelatinand Polyacrylic Acid as a Crosslinked Hydrogel in Vitro. Journal of Biomaterials Science, Polymer Edition, 15, 1019-1031.
http://dx.doi.org/10.1163/1568562041526478
[4] Laurent, S., Forge, D., Port, M., Roch, A., Robic, C., Vander Elst, L. and Muller, R.N. (2008) Magnetic Iron Oxide Nanoparticles: Synthesis, Stabilization, Vectorization, Physicochemical Characterizations, and Biological Applications. Chemical Reviews, 108, 2064-2110.
http://dx.doi.org/10.1021/cr068445e
[5] Gong, P., Li, H., He, X., Wang, K., Hu, J., Tan, W., Zhang, S. and Yang, X. (2007) Preparation and Antibacterial Activity of Fe3O4@ Ag Nanoparticles. Nanotechnology, 18, 285604.
http://dx.doi.org/10.1088/0957-4484/18/28/285604
[6] Chudasama, B., Vala, A.K., Andhariya, N., Upadhyay, R.V. and Mehta, R.V. (2009) Enhanced Antibacterial Activity of Bifunctional Fe3O4-Ag Core-Shell Nanostructures. Nano Research, 2, 955-965.
http://dx.doi.org/10.1007/s12274-009-9098-4
[7] Gupta, A.K. and Curtis, A.S. (2004) Lactoferrin and Ceruloplasmin Derivatized Superparamagnetic Iron Oxide Nanoparticles for Targeting Cell Surface Receptors. Biomaterials, 25, 3029-3040.
http://dx.doi.org/10.1016/j.biomaterials.2003.09.095
[8] Maydell, H.J. (1986) Trees and Shrubs of the Sahel Their Characteristics and Uses. Deutsche Gesellschaft fur Technische Zusammenarbeit (GTZ), Germany.
[9] Ya’u, J., Abdulmalik, U.N., Yaro, A.H., Chindo, B.A., Anuka, J.A. and Hussaini, I.M. (2011) Behavioral Properties of Balanites aegyptiaca in Rodents. Journal of Ethnopharmacology, 135, 725-729.
http://dx.doi.org/10.1016/j.jep.2011.04.003
[10] Duke, J.A. and Duke, P.A.K. (1983) Medicinal Plants of the Bible. Trado-Medic Books.
[11] Awad, M.A., El Dib, R.A., Almusayeib, N., Al-Massarani, S., Ortashi, K.M. and Hendi, A.A. (2013) Novel Balanites aegyptiaca Mesocarp Synthesized Silver Nanoparticles: Formation, Characterization, Antimicrobial, Cytotoxicity and Antiviral Effects. Digest Journal of Nanomaterials & Biostructures (DJNB), 8, 4.
[12] Al Ashaal, H.A., Farghaly, A.A., El Aziz, M.A. and Ali, M.A. (2010) Phytochemical Investigation and Medicinal Evaluation of Fixed Oil of Balanites aegyptiaca Fruits (Balantiaceae). Journal of Ethnopharmacology, 127, 495-501.
http://dx.doi.org/10.1016/j.jep.2009.10.007
[13] Shimoiizaka, J., Nakatsuka, K., Fujita, T. and Kounosu, A. (1980) Sink-Float Separators Using Permanent Magnets and Water Based Magnetic Fluid. IEEE Transactions on Magnetics, 16, 368-371.
http://dx.doi.org/10.1109/TMAG.1980.1060588
[14] Khalafalla, S.E. and Reimers, G.W. (1980) Preparation of Dilution-Stable Aqueous Magnetic Fluids. IEEE Transactions on Magnetics, 16, 178-183.
http://dx.doi.org/10.1109/TMAG.1980.1060578
[15] Wooding, A., Kilner, M. and Lambrick, D.B. (1991) Studies of the Double Surfactant Layer Stabilization of Water-Based Magnetic Fluids. Journal of Colloid and Interface Science, 144, 236-242.
http://dx.doi.org/10.1016/0021-9797(91)90254-6
[16] Harborne, J.B. (1984) Phytochemical Methods. 2nd Edition, Chapman and Hall, New York.
http://dx.doi.org/10.1007/978-94-009-5570-7
[17] Christie, W.W. (1972) The Preparation of Alkyl Esters from Fatty Acids and Lipids. In: Gunstone, F.D. and Elek, P., Eds., Topics in Lipid Chemistry, Vol. 3, Scientific Books Ltd., London, 171-197.
[18] Christie, W.W. (1989) Gas Chromatography and Lipids. Vol. 39, Oily Press, Ayr.
[19] Case, C.L. and Johnson, T.R. (1984) Laboratory Experiments in Microbiology. Benjamin/Cummings Publishing Company, California, USA.
[20] Ruparelia, J.P., Chatterjee, A.K., Duttagupta, S.P. and Mukherji, S. (2008) Strain Specificity in Antimicrobial Activity of Silver and Copper Nanoparticles. Acta Biomaterialia, 4, 707-716.
http://dx.doi.org/10.1016/j.actbio.2007.11.006
[21] Alves, S.P., Marcelino, C., Portugal, P.V. and Bessa, R.J.B. (2006) Short Communication: The Nature of Heptadecenoic Acid in Ruminant Fats. Journal of Dairy Science, 89, 170-173.
http://dx.doi.org/10.3168/jds.S0022-0302(06)72081-1
[22] Shorland, F.B. and Jessop, A.S. (1955) Isolation of Δ9 Heptadecenoic Acid from Lamb Caul Fat 737-737. Nature, 176, 737.
http://dx.doi.org/10.1038/176737a0
[23] Vlaeminck, B., Dufour, C., Van Vuuren, A.M., Cabrita, A.R.J., Dewhurst, R.J., Demeyer, D. and Fievez, V. (2005) Use of Odd and Branched-Chain Fatty Acids in Rumen Contents and Milk as a Potential Microbial Marker. Journal of Dairy Science, 88, 1031-1042.
http://dx.doi.org/10.3168/jds.S0022-0302(05)72771-5
[24] Shan, G., Xing, J., Zhang, H. and Liu, H. (2005) Biodesulfurization of Dibenzothiophene by Microbial Cells Coated with Magnetite Nanoparticles. Applied and Environmental Microbiology, 71, 4497-4502.
http://dx.doi.org/10.1128/AEM.71.8.4497-4502.2005
[25] Mosivand, S., Monzon, L.M.A., Ackland, K., Kazeminezhad, I. and Coey, J.M.D. (2013) Structural and Magnetic Properties of Sonoelectrocrystallized Magnetite Nanoparticles. Journal of Physics D: Applied Physics, 47, 055001.
http://dx.doi.org/10.1088/0022-3727/47/5/055001
[26] Seidenfaden, R., Krauter, A., Schertzinger, F., Gerardy-Schahn, R. and Hildebrandt, H. (2003) Polysialic Acid Directs Tumor Cell Growth by Controlling Heterophilic Neural Cell Adhesion Molecule Interactions. Molecular and Cellular Biology, 23, 5908-5918.
http://dx.doi.org/10.1128/MCB.23.16.5908-5918.2003
[27] Nakamoto, K. (1986) Infrared and Raman Spectra of Inorganic and Coordination Compounds. John Wiley & Sons Ltd., New York.
[28] Tao, Y.T. (1993) Structural Comparison of Self-Assembled Monolayers of n-Alkanoic Acids on the Surfaces of Silver, Copper, and Aluminum. Journal of the American Chemical Society, 115, 4350-4358.
http://dx.doi.org/10.1021/ja00063a062
[29] Zhao, S.Y., Lee, D.G., Kim, C.W., Cha, H.G., Kim, Y.H. and Kang, Y.S. (2006) Synthesis of Magnetic Nanoparticles of Fe3O4 and CoFe2O4 and Their Surface Modification by Surfactant Adsorption. Bulletin of the Korean Chemical Society, 27, 237-242.
http://dx.doi.org/10.5012/bkcs.2006.27.2.237
[30] Zhang, W., Shi, X., Huang, J., Zhang, Y., Wu, Z. and Xian, Y. (2012) Bacitracin-Conjugated Superparamagnetic Iron Oxide Nanoparticles: Synthesis, Characterization and Antibacterial Activity. Chemphyschem, 13, 3388-3396.
http://dx.doi.org/10.1002/cphc.201200161
[31] Li, D., Jiang, D., Chen, M., Xie, J., Wu, Y., Dang, S. and Zhang, J. (2010) An Easy Fabrication of Monodisperse Oleic Acid-Coated F3O4 Nanoparticles. Materials Letters, 64, 2462-2464.
http://dx.doi.org/10.1016/j.matlet.2010.08.025
[32] Grayer, R.J. and Harborne, J.B. (1994) A Survey of Antifungal Compounds from Higher Plants, 1982-1993. Phytochemistry, 37, 19-42.
http://dx.doi.org/10.1016/0031-9422(94)85005-4

  
comments powered by Disqus

Copyright © 2018 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.