Scientific Research

An Academic Publisher

Subgraph Isomorphism Based Intrinsic Function Reduction in Decompilation

**Author(s)**Leave a comment

Received 29 December 2015; accepted 20 March 2016; published 23 March 2016

1. Introduction

In Figure 1(a), the source code which invokes memcmp function is listed. Disassembled code of memcmp is listed in Figure 1(b) and the decompilation result of Hex-Rays is listed in Figure 1(c). The disassembled

(a) (b) (c)

Figure 1. Hex-Rays decompilation result. (a) Source code; (b) Disassembly program; (c) Decompile result of Hex-Rays.

program of memcmp shows that its control flow relationship is very complex and the decompilation result has goto statements, complicated conditional statements and nested control flow relationship. In fact, the disassembled program should just be translated into a single call statement v13 = memcmp (v12, v8, v11) where v12 points to the first buffer, v8 points to the second buffer and v11 is the number of bytes to be compared. According to our test, many inlined intrinsic functions are not handled properly by Hex-Rays. In order to improve the readability, we design the algorithm based graph matching [7] [8] to detect more such structures and improve the readability of decompilation results.

In this paper, we proposed a new decompilation architecture which first constructs the control flow graph of the disassembled program, then detects intrinsic functions on the structured disassembled program based on graph-subgraph isomorphism algorithm and update their representations, third we generate the immediate representation of this disassembled program, at last we do the data flow analysis, type analysis, structure analysis and code generation on the IR (Intermediate Representation).

Our contribution mainly lies in the following two aspects.

First, we rearrange the decompilation processes. Before generating the RTL (Register Transfer Language) [9] representation of the program, we recover the control flow graph of the program and the disassembled program is reserved in the subsequent optimization passes to offer more useful information, such as type information, memory access pattern etc.

The rest of the paper is organized as follows. Section 2 describes previous work. Section 3 gives an overview of our system. Section 4 outlines our algorithm. Section 5 shows the experimental result. Section 6 and Section 7 show the discussion and the conclusion.

2. Previous Work

Decompilation techniques were initially used in the 1960s to aid the code migration from one platform to another. Since then, decompilation has been applied to program comprehension, source code recovery, debugging program and virus analysis. Some of the most prevalent decompilers and their main techniques are presented below.

2.1. Decompiler

Boomerang [1] constructs the RTL representation of a program with the help of SSL (Semantic Specification Language) [11] description and all the decompilation passes are operated on RTL. According to our test, Boomerang fails to detect the inlined intrinsic function.

RD [2] detects the instruction idiom on the LLVM [14] IR code using a technique called peephole optimization [15] which is widely used in most optimizing compilers. But it’s better to do the idiom analysis and intrinsic function detection on the assembly code rather than on the intermediate representation. The reasons are as following.

First, detecting idiom on IR is not universal because idioms vary greatly from different ISAs. So we need to construct different idiom patterns for different ISAs for the same idiom on IR which greatly reduces the generality of the IR analysis. While detecting the idiom earlier on the assembly code can improve the generality of the IR.

Second, analyzing the idioms earlier on the assembly code can reduce the complexity of many subsequent optimizations on the IR, such as the depletion in IR number and the simplicity of control flow, as the result, the complexity of data flow analysis is lowered.

Third, recovering the inlined intrinsic function earlier can provide type information for the succeeding type analysis. According to the result of [2] , the idiom detection accuracy drops to 20% because of the instruction semantics of X86 is complex and the description of LLVM IR is so long which makes the idiom detection inefficient.

2.2. Graph Isomorphism

Graph isomorphism [16] is a well-studied topic which is widely used in compiler optimization [7] , type checking [17] and semantic description [18] of functional programming language but not in decompiler. In fact graph isomorphism has many potential uses in decompiler as well; it’s an area in need of being mined.

A graph G1 = (V1, E1) is isomorphic to a subgraph of a graph G2 = (V2, E2) if there exists a subgraph of G2, say G3 = (V3, E3), such that there is a bijection. For each pair of vertices, if and only if. In our case, as the instructions of a basic block play an important role so the graph is a labeled graph. Assume the vertex labeling for G1 and G3 is and respectively. Then for each vertex, should be semantic compatible with.

James Jianghai Fu [7] proposes an efficient algorithm to solve the rooted directed graph pattern matching problem using dynamic programming. Given a pattern graph P and a target graph T, its time and space complex-

ity is. L.P. Cordella et al. [8] use SSR (State Space Representation) to describe a graph

matching process and each state of the matching process represents a partial mapping solution. The algorithm does not rely on any special topological property of the graphs and can find all graph and graph-subgraph iso-

morphism between two given graphs. The worst temporal and spatial complexity of this algorithm is and.

Based on the prevalence of code reuse, Wei Ming Khoo [19] proposes that decompilation can be done by search. He extracts instruction mnemonics, control-flow subgraphs and data constants from disassembled program to index source code from database which is constructed in advance. MotohiroKawahito et al. [7] propose to use topological embedding algorithm to detect hardware-assist instructions (such as TRT and TROT instructions on IBM zSeries) to accelerate delimiter search and character conversion. Tomáš Bílý [20] proposes to detect special cases of loops which can be transformed to memset or memcpy call to improve the runtime performance.

3. System Overview

ASMBoom is a decompiler which is constructed by us from the open source decompilation architecture named boomerang. Figure 2 shows a high level overview of the approach that is taken by ASMBoom to decompile a

Figure 2. Decompilation flow.

target disassembled code. The frontend of the decompiler is called ASMBoom which consists of three parts CFG Recovery [21] , Intrinsics Reduction and RTL Generation. The Backend of the decompiler is adapted from the Boomerang decompiler which also consists of three main parts Data Flow Analysis, Structure Analysis and Code Generation.

The biggest difference between our decompiler and the state-of-art decompilers is the decompilation sequence. Unlike the traditional decompilation process, before the generation of Intermediate Representation; we do intrinsics function detection which is highlighted using dotted box in the Figure 2.

The ASMBoom components consist of three main parts, they are CFG Recovery, Intrinsics Reduction and RTL Generation.

CFG Recovery is the process of converting the sequential disassembled program into graph representation based on control flow relationship. One of the greatest challenges in recovering the CFG is the indetermination of the branch address when coming across indirect jump instructions, jump table and indirect call instructions. In this paper we assume that the input disassembled code can be perfectly constructed so that we can focus on the intrinsic function detection.

After the intrinsic functions are detected, the original CFG is modified and the parameter and return value are identified, we need to generate the RTL representation of the assembly program which is completed by a simple traversal of each basic block of the CFG and generating IR for each instruction. Then the RTL of the input assembly is disposed by some of the processes in Boomerang, such as Data Flow Analysis, Structural Analysis and Code Generation. These are all well studied problems in modern compiler theory based decompiler which is out of the range of this paper.

4. Algorithm

The algorithm consists of three major parts. They are semantic compatibility of basic blocks, process of matching and determination of parameter and return value. Semantic compatibility of basic blocks, which assists the matching process, is employed to judge the similarity of two basic blocks. Most of the times, though two CFGs are isomorphic they can express different programs for the fact that the semantics of corresponding basic blocks are not compatible. Matching process determines which subgraphs of the target graph are isomorphic with the pattern graph. The basic blocks in the target graph which are matched with the pattern graph form a region [10] . This property of the in lined intrinsic function provides much more convenience to the analysis of parameter and return value of the intrinsic function. The CFG of the target function needs to be reconstructed before the parameter and return value are determined.

In Figure 3 the intrinsic function reduction algorithm is outlined. The original recursive VF matching algorithm [8] is transformed into an iterative algorithm. Its time complexity is the same with the VF matching algorithm but its space complexity is greatly reduced for the recursive runtime stack is removed. The mapping M is

expressed as the ordered pairs (n, m) each representing the mapping of a node n of graph with a node m of:

(4.1)

Figure 3. Intrinsic function reduction algorithm.

State space representation is employed to effectively describe a graph matching process and each state S of the matching process represents a partial mapping solution. A partial mapping solution M(S) is the subsequence of M, i.e. contains only some components of M.

The details of semantic compatibility of two basic blocks, matching process and parameter and return value determination are explained below.

4.1. Semantic Compatibility of Two Basic Blocks

There are different ways to judge the semantic equivalence between two basic blocks. This topic is widely studied in compiler optimization and malware analysis. In [22] , the authors use the Manhattan distance between the basic blocks’ instruction mixes to judge their semantic equivalence. In [23] , they use edit distance of the instructions to measure the semantic equivalence between two basic blocks. Paper [24] uses symbolic execution result to judge the semantic equivalence between basic blocks. Authors of [25] assign each basic block a color based on the instruction categories. They divide the instructions into 7 classes; data transfer, arithmetic, logic, test, stack, branch and call. Then the semantic compatibility is determined by the color.

However, all these methods are statistics based. In our system, we do not use the statistics based methods for the semantic of a basic block not only depends on the statistical features but also relies on the sequential feature and data flow. For instance, two basic blocks having the same statistical feature cannot guarantee that their semantics are equivalent because their instruction sequences and data flows may differ from each other.

Therefore, we use subsequence inclusion to judge the semantic compatibility of two basic blocks. That is basic block Pb of the intrinsic function template is compatible with basic block Tb of the target function if the mnemonics of Pb is a common sequence of the mnemonics of Tb. The reason why this method is employed is that sometimes basic blocks of the boundary of the intrinsic function is mixed up with adjacent basic blocks which do not belong to the intrinsic functions.

4.2. Matching Process

Matching process determines how the template is found in the target function using the modified VF matching algorithm in Figure 3. VF matching algorithm is a method to solve the subgraph isomorphism problem, which is a computational task in which two graphs G and H are given as input, and one must determine whether G contains a subgraph that is isomorphic to H. The feasibility rules are described in the above section. In our case, target graph is the decompiled assembly program expressed in CFG form. The pattern graph is the intrinsic function which is also in CFG form. In Figure 4, the target function consists of four basic blocks and the template

Figure 4. Graph based pattern match process.

consists of three basic blocks. Target function is a simple main function to compute the max value of two input integers and template is the expansion of max macro. The searching tree is also illustrated on the right side of Figure 4. As we can see, many branches of the search tree are pruned based on some heuristic rules which is stated in the above section.

Figure 4 shows the matching process between target graph G1 and pattern graph G2. Initially, the matching solution M is empty and the SSR is s0. First, it tests node n1 in G1 with node m1 in G2. They do not match each other because their semantics are incompatible. So it continues to test node n2 in G1 with node m1 in G2, both of the two basic blocks have a mov instruction. Thus, they are semantic compatible, the matching procedure continues and the matching solution M becomes {(n2, m1)}. At the match state S2, each successor of n2 in G1 is compared with each successor of m1 in G2. When stage S2 tries to expand to stage S3, once n3 and m3 are not semantic compatible, the matching process returns. Then stage S2 tries to expand to stage S4 by comparing n4 and m3. At this time, as they are semantic compatible and the matching solution M becomes {(n2, m1), (n4, m3)}. When stage S4 tries to expand matching solution M, as there are no successors for either n4 or m3 and the matching solution M does not cover either G1 or G2 entirely, the matching process returns to stage S2. Then n4 of G1 is matched with m2 of G2 to extend the match state to S5, as the semantic is not compatible. So it returns to S2.

When matching node n3 in G1 and node m2 in G2, they match each other perfectly. As a result, it enters stage S6 and expands the matching solution M to {(n2, m1), (n3, m2)}. At state S6, each successor of n3 in G1 is compared with each successor of m2 in G2. As they do match each other, the stage is expanded. Matching solution M becomes {(n2, m1), (n3, m2), (n4, m3)}. Now matching solution M covers all the nodes of G2, so the matching process terminates and the matching solution M is returned as the final result which means that graph G2 match the subgraph of G1 which consists of {n2, n3, n4}. There exists a mapping {(n2, m1), (n3, m2), (n4, m3)} between graph G1 and graph G2. And the subgraphs of G1 made up of {n2, n3, n4} needs to be reduced to a basic block which consists of a call instruction.

4.3. Parameter and Return Value Determination

Before determining the parameter and return value of the inlined intrinsic function, the boundary of the intrinsic function needs to be identified and the CFG of the target function needs to be reconstructed.

For the entry basic block of the inlined intrinsic function, instructions in the root basic block of the matched subgraph are often mixed up with its predecessor’s. If it is the case, we split the root basic block into two basic blocks with the first basic block containing instructions unrelated to the instructions in the template and the second basic block containing instructions related to the instructions in the template. Also, we add an edge from the first basic block to the second basic block, so as to denote the second basic block being the root basic block of the matched subgraph. Then we record all the incoming edges of the root basic block and set these edges as the incoming edges of the newly created basic block which contains a single call instruction with parameter and return value annotated.

For the exit basic blocks of the inlined intrinsic function, all the targeted basic blocks outside of the matched basic blocks need to be identified and recorded. These basic blocks will bethe targets of the newly created basic block.

Figure 5 illustrates the idea clearly. Figure 5(a) is the target function with a strcmp template embedded which is highlighted using dotted boxes. Figure 5(b) is the template of strcmp. Figure 5(c) is the target function after the intrinsic function strcmp is reduced. In Figure 5, there’s a match {(B2, T1), (B3, T2), (B4, T3), (B5, T4), (B6, T5), (B7, T6)} between the target function and the strcmp template. So the basic block set {B2, B3, B4, B5, B6, B7} will be reduced to a single basic block B2′. All the incoming edges from outside of the basic block set {B2, B3, B4, B5, B6, B7} is {

Van Emmerik [1] uses the following equations to determine the initial parameters and return values of a callee.

(4.2)

The parameter of the callee p, params (p), which are determined by the intersection of the live variables at call site live_on_entry (p) and the parameter filter param_filter. Results (p), the return results of the callee p, which are determined by the intersection of the return value definitions of procedure p return_filter (p) and the live variables at the exit of the call site live_on_exit (p).

Live_on_entry and live_on_exit can be computed by the live variable analysis algorithm. But for convenience, we assume live_on_entry and live_on_exit are all the full set as in our case the parameters and return values are determined by theparam_filter and the return_filter respectively.

(a) (b) (c)

Figure 5. Intrinsic function reduction illustration. (a) Target function; (b) Strcmp template; (c) Intrinsic function reduced.

The param_filter and return_filter are determined by a triple <#BasicBlock, #Instruction, #Operand>, where #BasicBlock is the basic block number, #Instruction is the instruction number and # Operand is the operand number. For instance, in Figure 5(b), the param_filter of the strcmp template is {<1, 1, 2>, <1, 2, 2>} which means the parameters of the strcmp intrinsic function can get from the 2nd operand of the 1st instruction in the 1st basic block and the 2nd operand of the 2nd instruction in the 1st basic block in turn. The return_filter of the strcmp template is {<6, 2, 1>} which means the return value of the strcmp intrinsic function can be got from the 1st operand of the 2nd instruction in the 6th basic block. To convert the triple representation into the variable representation, first the isomorphism mapping between the target function and the intrinsic function is used to convert the basic block number in template into the basic block number in the target function. In this case, the param_filter becomes {<2, 1, 2>, <2, 2, 2>} and the return_filter becomes {<7, 2, 1>} since T1 is matched with B2 and T6 is matched with B7. Second, the new triples in the param_filter and return_filter are used for indexing the operators in the target function. Finally, the param_filter becomes {[eax], [ecx]} and the return_filter becomes {eax}. Parameters of the inlined intrinsic function will be {[eax], [ecx]} and the return value of the inlined intrinsic function will be{eax}.

5. Experiment

To test the intrinsic function reduction algorithm, we collect some open source test suites and compile them with MSVC 2010 compiler with ?O2 optimization option. We choose these test suites for the reason that lots of supported intrinsic functions illustrated in Table 1 are contained in their source code. Xml [26] is the program which extracts and processes metadata from xml files. Awk [27] is the version of awk described in [28] by Al Aho et al. Grep [29] is a text search tool using regular expression. Sqlite [30] is a software library that implements a self-contained, serverless, zero-configuration, transactional SQL database engine. We also compare our decompiler with three of the most popular decompilers Hex-Rays, RD and REC.

We manually craft 5 intrinsic function patterns which are all memory and string related method. These five patterns are extracted from the exes compiled by MSVC 2010 compiler with ?O2 optimization option. Table 1 shows the supported intrinsic function names and their functional descriptions.

Table 2 lists the contrast experimental result. Hex-Rays, a plug-in of IDA, is a very famous decompiler product which has a programmatic API to allow customers to implement their own analysis methods. REC is an interactive decompiler which supports different kinds of file formats and instruction sets. Although REC sources are not in the public domain its executable can be downloaded from the Internet. RD is a retargetable decompiler that can be utilized for source code recovery, static malware analysis. RD provides online decompilation service and has a very convenient UI.

Table 2 presents the comparison of intrinsic function reduction among decompilers. The dash line in the table means the data is not available for the decompiler fails to get the data. Call times show numbers of intrinsic funcions which are called in source code. We compare our decompiler ASMBoom with Hex-Rays, REC and RD decompiler based on the test suite xml, awk, grep and sqlite. Detected times show numbers which can be detected by the four decompilers.

6. Discussion

On average, ASMBoom outperforms other decompilers. It demonstrates that graph isomorphism based intrinsic function reduction technique is more efficient than the F.L.I.R.T method which is used in Hex-Rays decompiler

Table 1. Supported intrinsic function.

Table 2. Comparison of intrinsic function reduction among decompilers.

and the method used in RD [31] . Hex-Rays sometimes misinterpret some intrinsic function like code segment as intrinsic function, especially on the memset intrinsic function. Graph isomorphism based method is based on the details of semantic compatibility of two basic blocks, matching process. So it can be more efficient than other decompilers in detecting graphs in fixed pattern.

Our algorithm fails to detect all the inlined intrinsic functions owing to the incompleteness of the templates we provide. By tracking all the inlined memcmp intrinsic function in the sqlite test suite, we find there’re different kinds of templates depending on its context. Most of the templates have redundant basic blocks inserted into the original template which turns the graph isomorphism problem into a graph topological embedding one.

7. Conclusions

Graph isomorphism based method to recover the inlined intrinsic function from structured assembly program is very efficient. We discover more inlined intrinsic functions than the state-of-art decompilers such as Hex-Rays, REC and RD.

The only shortcoming of our approach is that the intrinsic function template is compiler oriented. Intrinsic functions vary greatly from compilers both in topological structure and semantic of basic blocks. Constructing various templates for the same intrinsic function makes matching process a complex decision-making procedure.

Fund

This work was supported by the science and technology project of Shaanxi province (2014K05-04).

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

*Journal of Software Engineering and Applications*,

**9**, 80-90. doi: 10.4236/jsea.2016.93007.

[1] | Van Emmerik, M.J. (2007) Static Single Assignment for Decompilation. The University of Queensland, Brisbane. |

[2] | Kroustek, J. and Pokorny, F. (2013) Reconstruction of Instruction Idioms in a Retargetable Decompiler. Federated Conference on Computer Science and Information Systems (FedCSIS), Kraków, 8-11 September 2013, 1519-1526. |

[3] |
Chen, G., et al. (2013) A Refined Decompiler to Generate C Code with High Readability. Software: Practice and Experience, 43, 1337-1358. http://dx.doi.org/10.1002/spe.2138 |

[4] |
Reverse Engineering Compiler. http://www.backerstreet.com/rec/rec.htm |

[5] | Guilfanov, I. (2008) Decompilers and Beyond. Black Hat USA. |

[6] |
Hex-Rays, IDA F.L.I.R.T Technology: In-Depth. 2015. https://www.hex-rays.com/products/ida/tech/flirt/in_depth.shtml |

[7] |
Fu, J.J. (1997) Directed Graph Pattern Matching and Topological Embedding. Journal of Algorithms, 22, 372-391. http://dx.doi.org/10.1006/jagm.1996.0818 |

[8] |
Cordella, L.P., et al. (1999) Performance Evaluation of the VF Graph Matching Algorithm. Proceedings of International Conference on Image Analysis and Processing, Venice, 1999, 1172-1177. http://dx.doi.org/10.1109/iciap.1999.797762 |

[9] |
Cifuentes, C. and Van Emmerik, M. (2000) UQBT: Adaptable Binary Translation at Low Cost. Computer, 33, 60-66. http://dx.doi.org/10.1109/2.825697 |

[10] | Aho, A.V., Ullman, J.D. and Sethi, R. (1986) Compilers, Principles, Techniques, and Tools. Addison-Wesley Pub. Co., Reading, MA, 796 p. |

[11] |
Duke, R., Rose, G. and Smith, G. (1995) Object-Z: A Specification Language Advocated for the Description of Standards. Computer Standards & Interfaces, 17, 511-533. http://dx.doi.org/10.1016/0920-5489(95)00024-O |

[12] | Brumley, D., et al. (2013) Native x86 Decompilation Using Semantics-Preserving Structural Analysis and Iterative Control-Flow Structuring. USENIX, Washington DC, 353-368. |

[13] |
Brumley, D., et al. (2011) BAP: A Binary Analysis Platform. In: Proceedings of the 23rd International Conference on Computer Aided Verification, Springer-Verlag, Snowbird, UT. http://dx.doi.org/10.1007/978-3-642-22110-1_37 |

[14] |
Lattner, C. and Adve, V. (2004) LLVM: A Compilation Framework for Lifelong Program Analysis & Transformation. IEEE International Symposium on Code Generation and Optimization, 20-24 March 2004, 75-86. http://dx.doi.org/10.1109/cgo.2004.1281665 |

[15] |
Tanenbaum, A.S., Van Staveren, H. and Stevenson, J.W. (1982) Using Peephole Optimization on Intermediate Code. ACM Transactions on Programming Languages and Systems (TOPLAS), 4, 21-36. http://dx.doi.org/10.1145/357153.357155 |

[16] |
Ullmann, J.R. (1976) An Algorithm for Subgraph Isomorphism. Journal of the ACM (JACM), 23, 31-42. http://dx.doi.org/10.1145/321921.321925 |

[17] |
Katzenelson, J., Pinter, S.S. and Schenfeld, E. (1992) Type Matching, Type-Graphs, and the Schanuel Conjecture. ACM Transactions on Programming Languages and Systems (TOPLAS), 14, 574-588. http://dx.doi.org/10.1145/133233.133247 |

[18] |
Holm, K.H. (1990) Graph Matching in Operational Semantics and Typing. In: CAAP’90, Springer, 191-205. http://dx.doi.org/10.1007/3-540-52590-4_49 |

[19] | Khoo, W.M. (2013) Decompilation as Search. University of Cambridge, Cambridge. |

[20] | Bíly, T. (2006) Replacement Special Loop Form by a Call of Built-in Function. In: Proceedings of the GCC Developers’ Summit 2006. |

[21] | Cooper, K.D., Harvey, T.J. and Waterman, T. (2002) Building a Control-Flow Graph from Scheduled Assembly Code. |

[22] |
Demme, J. and Sethumadhavan, S. (2012) Approximate Graph Clustering for Program Characterization. ACM Transactions on Architecture and Code Optimization, 8, 1-21. http://dx.doi.org/10.1145/2086696.2086700 |

[23] |
Cong, J., Hui, H. and Wei, J. (2010) A Generalized Control-Flow-Aware Pattern Recognition Algorithm for Behavioral Synthesis. Design, Automation & Test in Europe Conference & Exhibition (DATE), Dresden, 8-12 March 2010, 1255-1260. http://dx.doi.org/10.1109/date.2010.5456999 |

[24] |
Luo, L., et al. (2014) Semantics-Based Obfuscation-Resilient Binary Code Similarity Comparison with Applications to Software Plagiarism Detection. Proceedings of the 22nd ACM SIGSOFT International Symposium on Foundations of Software Engineering. Hong Kong, China: ACM. http://dx.doi.org/10.1145/2635868.2635900 |

[25] |
Kruegel, C., et al. (2006) Polymorphic Worm Detection Using Structural Information of Executables. Proceedings of the 8th International Conference on Recent Advances in Intrusion Detection, Springer-Verlag, Seattle. http://dx.doi.org/10.1007/11663812_11 |

[26] |
Liu Zhangpei.xml Test Suite. https://github.com/livenowhy/xml |

[27] |
Ted Nyman.awk test suite. https://github.com/tnm/awk. 2015 March. |

[28] | Aho, A.V., et al. (1988) The AWK Programming Language. Addison-Wesley, New York. |

[29] | Coapp-Packages. Grep Test Suite. https://github.com/coapp-packages/grep |

[30] |
Sqlite Test Suite. http://www.sqlite.org/download.html |

[31] | Durfina, L. and Kolár, D. (2013) Generic Detection of the Statically Linked Code. Proceedings of the Twelfth International Conference on Informatics (INFORMATICS’13), SpisskáNováVes, SK, FEI TU in Kosice, 157-161. |

[32] | Yan, X. and Han, J. (2002) gSpan: Graph-Based Substructure Pattern Mining. Proceedings of IEEE International Conference on Data Mining, Maebashi, 9-12 December 2002. |

[33] | Ayres, J., Gehrke, J., Yiu, T. and Flannick, J. (2002) Sequential Pattern Mining Using a Bitmap Representation. In: Proceedings of the 8th ACM SIGKDD International Conference on Knowledge Discovery and Data Mining, ACM, Edmonton. |

Copyright © 2018 by authors and Scientific Research Publishing Inc.

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.