Share This Article:

Synthesis and Characterization of Lithium Manganese Oxide with Different Ratio of Mole on Lithium Recovery Process from Ge-othermal Fluid of Lumpur Sidoarjo

Abstract Full-Text HTML XML Download Download as PDF (Size:1566KB) PP. 56-62
DOI: 10.4236/msce.2015.311007    2,204 Downloads   2,630 Views   Citations

ABSTRACT

Geothermal fluid of Lumpur Sidoarjo (Lusi) with lithium content as high as 5.81 mg/liter has a great potential as the source of lithium. Lithium recovery from geothermal liquid of Lusi is firstly investigated by adsorption methods with Lithium Manganese Oxide (LMO) as absorbent. LMO is considered as a promising candidate of adsorbent material due to non-toxic and low cost production. LMOs with different ratio of mole are prepared by solid state reactions method at temperature 500?C for 5 hrs. XRD peaks of pre- and post-acid treatment LMO 1, 0.8 and 0.5 show a stable spinel crystal structure while LMO 2 has monoclinic structure. The highest lithium adsorption capability is obtained by LMO 1 with 6.6 mg/g.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

Noerochim, L. , Satriawangsa, G. , Susanti, D. and Widodo, A. (2015) Synthesis and Characterization of Lithium Manganese Oxide with Different Ratio of Mole on Lithium Recovery Process from Ge-othermal Fluid of Lumpur Sidoarjo. Journal of Materials Science and Chemical Engineering, 3, 56-62. doi: 10.4236/msce.2015.311007.

References

[1] Jaskula, B.W. (2013) Lithium: U.S. Geological Survey Mineral Commodity Summaries. USGS National Minerals Information Center, Virginia, 94-95.
[2] David, R.J., Simon, S.A., Swarbrick, R.E. and Tingay, M.J. (2010) Probabilistic Longevity Estimate for the LUSI Mud Volcano, East Java. Journal of the Geological Society, 168, 517-523.
[3] Tanikawa, W. (2011) The Mechanism of Overpressure Generation in the LUSI Mud Volcano. E-Proceeding Symposium on Future Lusi, BPLS.
[4] Ooi, K., Miyai, Y. and Katoh, S. (1986) Recovery of Lithium from Seawater by Manganese Oxide Adsorbent. Separation Science and Technology, 21, 755-766.
[5] Chitrakar, R., Kanoh, H., Miyai, Y. and Ooi, K. (2001) Recovery of Lithium from Seawater Using Manganese Oxide Adsorbent (H1.6Mn1.6O4) Derivied from Li1.6Mn1.6O. Industrial & Engineering Chemistry Research, 40, 2054-2058.
http://dx.doi.org/10.1021/ie000911h
[6] Kitajou, A., Suzuki, T., Nishihama, S. and Yoshizuka, K. (2003) Selective Recovery of Lithium From Seawater Using a Novel MnO2 Adsorbent II-Enhancement of Lithium Ion Selectivity of The Adsorbent. Ars Separatoria Acta, 2, 97-106.
[7] Wang, L., Ma, W., Liu, R., Li, H.Y. and Meng, C.C. (2006) Correlation between Li+ Adsorption Capacity and the Preparation Conditions of Spinel Lithium Manganese Precursor. Solid State Ionics, 177, 1421-1428.
http://dx.doi.org/10.1016/j.ssi.2006.07.019
[8] David, W.I.F., Thackeray, M.M., Bruce, P.G. and Goodenough, J.B. (1984) Lithium Insertion Into β-MnO2 and The Rutile-Spinel Transformation. Materials Research Bulletin, 19, 99-106.
http://dx.doi.org/10.1016/0025-5408(84)90015-1
[9] Chung, K.-S., Lee, J.-C., Kim, W.-K., Kim, S.B. and Cho, K.Y. (2008) Inorganic Adsorbent Containing Polymeric Membrane Reservoir for the Recovery of Lithium from Seawater. Journal of Membrane Science, 325, 503-508.
http://dx.doi.org/10.1016/j.memsci.2008.09.041
[10] Hunter, J.C. (1981) Preparation of a New Crystal Form of Manganese Dioxide: λ-MnO2. Journal of Solid State Chemistry, 3, 142-147.
http://dx.doi.org/10.1016/0022-4596(81)90323-6
[11] Chung, K., Lee, J., Kim, E., Lee, K., Kim, Y. and Ooi, K. (2004) Recovery of Lithium from Seawater Using Nano-Manganese Oxide Adsorbents Prepared by Gel Process. Materials Science Forum, 449-452, 277-280.
http://dx.doi.org/10.4028/www.scientific.net/MSF.449-452.277
[12] Ammundsen, B., Aitchison, P.B., Burns, G.R., Jones, D.J. and Roziere, J. (1997) Proton Insertion and Lithium-Proton Exchange in Spinel Lithium Manganates. Solid State Ionics, 97, 269-276.
http://dx.doi.org/10.1016/S0167-2738(97)00065-9
[13] Feng, Q., Miyai, Y., Kanoh, H. and Ooi, K. (1992) Li+ Extraction/Insertion with Spinel-Type Lithium Manganese Oxides, Characterization of Redox-Type and Ion-Exchange-Type Sites. Langmuir, 8, 1861-1867.
http://dx.doi.org/10.1021/la00043a029

  
comments powered by Disqus

Copyright © 2018 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.