Share This Article:

Design and Analysis of Different Types of Rotors for Pico-Turbine

Abstract Full-Text HTML Download Download as PDF (Size:753KB) PP. 141-147
DOI: 10.4236/sgre.2015.66013    4,732 Downloads   5,548 Views   Citations

ABSTRACT

Small-scale vertical axis wind turbine (VAWT) rotor is developed for use in areas lacking adequate energy infrastructure. The materials and methods of construction are selected to minimize cost as much as possible. The paper describes the design of different kinds of vertical axis wind turbine rotors having different number of blades and twist angle. The aim of the work is to study the influence of the different designs on rotational speed and power of rotor in different wind speed.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

Tabassum, S. , Rahaman, M. , Bashar, M. , Islam, S. , Sharmin, A. , Imam, A. , Hoque, A. , Mahbub, N. , Khatun, S. and Khanam, M. (2015) Design and Analysis of Different Types of Rotors for Pico-Turbine. Smart Grid and Renewable Energy, 6, 141-147. doi: 10.4236/sgre.2015.66013.

References

[1] Ajedegba, J.O. (2008) Effects of Blade Configuration on Flow Distribution and Power Output a Zephyr Vertical Axis Wind Turbine. Thesis Submitted for a Degree of M.Sc. to University of Ontario Institute of Technology.
[2] Musgrove, P.J. (1987) Wind Energy Conversion: Recent Progress and Future Prospects. Solar & Wind Technology, 4, 37-49. http://dx.doi.org/10.1016/0741-983X(87)90006-3
[3] Amirat, Y., Benbouzid, M.E.H., Bensaker, B. and Wamkeue, R. (2007) Condition Monitoring and Fault Diagnosis in Wind Energy Conversion Systems: A Review. IEEE International Electric Machines and Drives Conference, 2, 1434- 1439.
[4] Ali, M.H. (2013) Experimental Comparison Study for Savonius Wind Turbine of Two & Three Blades at Low Wind Speed. International Journal of Modern Engineering Research (IJMER), 3, 2978-2986.
[5] Hyers, R.W., McGowan, J.G., Sullivan, K.L., Manwell, J.F. and Syrett, B.C. (2006) Condition Monitoring and Prognosis of Utility Scale Wind Turbines. Energy Materials, 1, 187-203.
http://dx.doi.org/10.1179/174892406X163397
[6] Kumar, A. and Grover, S. (1993) Performance Characteristics of a Savonius Rotor for Wind Power Generation—A Case Study, Alternate Sources of Energy. Proceedings of Ninth National Convention of Mechanical Engineers, IIT Kanpur.
[7] Ogawa, T., Yoshida, H. and Yokota, Y. (1989) Development of Rotational Speed Control Systems for a Savonius-Type Wind Turbine. ASME Journal of Fluids Engineering, 111, 53-58.
http://dx.doi.org/10.1115/1.3243598
[8] Shankar, P.N. (1978) Development of Vertical Axis Wind Turbines. Rural Technology, IISc, Bangalore, 145-162.
[9] Widodo, W.S., Chin, A.C., Sihombing, H. and Yuhazri, M.Y. (2012) Design and Analysis of 5 kW Savonius Rotor Blade. Global Engineers & Technologists Review, 2.
[10] Bennouna, O., Heraud, N., Rodriguez, M. and Camblong, H. (2007) Data Reconciliation and Gross Error Detection Applied to Wind Power. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 221, 497-506. http://dx.doi.org/10.1243/09596518jsce266

  
comments powered by Disqus

Copyright © 2018 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.