Share This Article:

Study on Ultimate Pullout Force of Grouting Anchors of the Anchor-Pull Retaining Wall

Abstract PP. 32-37
DOI: 10.4236/gep.2014.25005    3,007 Downloads   3,353 Views  

ABSTRACT

Determination of the grouting anchor pullout force is a key step during the design of anchor-pull retaining wall, but it is mostly determined relied on empirical formula at present, and the rationality and the safety cannot be effectively guaranteed. Based on the engineering case of the gravity retaining wall of Qinglin Freeway, the model test was designed, and combined with the results of the ABAQUS finite element numerical analysis, it was analyzed that how the anchor axial pulling force distributes. The results showed that the force of the anchor near the wall bolt was large and which far from the wall was small and the ultimate pullout force was proportional to the length, diameter and shear strength. When the end tension of the anchor was small, the top load played a leading role on the anchor tension. This conclusion confirmed the calculation formula of ultimate pullout force was and provided a theoretical basis for anchor-pull retaining wall design and calculation.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

Zhang, H. , Yu, Y. , Song, X. , Li, Y. and Wu, J. (2014) Study on Ultimate Pullout Force of Grouting Anchors of the Anchor-Pull Retaining Wall. Journal of Geoscience and Environment Protection, 2, 32-37. doi: 10.4236/gep.2014.25005.

References

[1] Ge, L. D., & Zhu, H. B. (1999). Application of Anchor Retaining Wall. Beijing Water Conservancy, 1, 20-22.
[2] Liao, F. X., Chen, Y. K., & Yin, J. D. (2006) The Pressure Dispersion-Type Prestressed Anchor Cable Construction Technology. Subgrade Engineering, 1, 85-87.
[3] Ying, H. W., Jiang, B., & Xie, K. H. (2007). Considering Soil Arching Effect of Retaining Wall Active Soil Pressure Distribution. Chinese Journal of Geotechnical Engineering, 29, 717-722.
[4] Zhang, H. B., Song, X. G., Jiang, J. H., et al. (2011). Model Test of Mechanical Characteristics of Cantilever Retaining Wall with Mutual Anchor. Applied Mechanics and Materials, 90-93, 508-513. http://dx.doi.org/10.4028/www.scientific.net/AMM.90-93.508
[5] Zhu, Y. P., & Luo, X. H. (2008). The Design of Retaining Structures. Beijing: Higher Education Press.

  
comments powered by Disqus

Copyright © 2019 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.