Share This Article:

A Realization Method of Protocol Conversion Between Modbus and IEC61850

Abstract Full-Text HTML Download Download as PDF (Size:2329KB) PP. 18-23
DOI: 10.4236/ojapps.2013.32B004    4,238 Downloads   6,016 Views   Citations

ABSTRACT

In order to adapt to the construction needs of the smart grid, smart substation need to solve the problem of protocol conversion between the conventional non-standardized condition monitoring equipment and the standardized monitoring system. This paper proposed a realization method of conversion method between Modbus and IEC61850. Object-oriented technology is used for information model on Modbus. After the analysis of IEC61850 and MMS information and service model, to establish the model mapping relationship between IEC61850, MMS and Modbus based on the principle of minimum information point which is one to one correspondence. Combined with the implementation of SISCO MMS-EASE LITE software development kit programming, giving a realization method using QT programming techniques based on the mapping model. Finally, the establishment the interval controller as an example of protocol scheme verifies the correctness and the feasibility of protocol conversion method.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

F. Zhang, Y. Zhu, C. Yan, J. Bi, H. Xiong and S. Yuan, "A Realization Method of Protocol Conversion Between Modbus and IEC61850," Open Journal of Applied Sciences, Vol. 3 No. 2B, 2013, pp. 18-23. doi: 10.4236/ojapps.2013.32B004.

References

[1] S. Li, Z. L. Jia and Z. H. Ying, “Reconstruction of Non-integrated Automation Substation Based on IEC61850,” Electric Power Automation Equip-ment, Vol. 30, No. 5, 2010, pp. 139-141.
[2] State Grid Corporation, “Online Monitoring System of Substation Equipment Technical Guidelines,” Beijing, 2011.
[3] D. W. Wang, Y. L. Zhu and Y. Wang, “Condition Monitoring and Integrating Platform for Power Transmission and Transformation Equipment Based on IEC61850,” Automation of Electric Power Systems, Vol. 34, No. 13, 2010, pp. 43-48.
[4] D. W. Wang, Y. Wang and J. Di, “Design Scheme of Condition Monitoring System for Smart Substation,” Automation of Electric Power Systems, Vol. 35, No. 18, 2011, pp. 51-56.
[5] J. Zhang and S. Z. Hou, “Research on IEC 61850 Sever Application Based on MMSEASE Lite,” Telecommunications for Electric Power System, Vol. 32, No, 227, 2011, pp. 55-58.
[6] D. W. Wang, C. Y. Yan and J. G. Bi, “An Approach to Mapping Between Modbus and IEC61850 for Condition Monitoring Communication Gateway in Substations,” Automation of Electric Power Systems, Vol. 36, No. 19, 2010, pp. 78-84.
[7] W. L. Wang, G. H. Xu and Z. H. Zhu, “Research of Protocol Gateway Device Based on CORBA Technology,” Power System Protection and Control, Vol. 37, No. 7, 2009, pp. 63-66.
[8] IEC61850-8-1 Communi-cation networks and systems in substations, Part 8-1:Specific communication service mapping (SCSM)—Mappings to MMS(ISO9606-1 and ISO9506-2) and to ISO/IEC8802-3[S].2004.
[9] K. Dong, B. Guan and W. Wang, “Research on Mapping between IEC61850 and MMS,” Power System Protection and Control, Vol. 38, No. 10, 2010, pp. 92-95.
[10] S. J. Wang, S. R. Ye and L. Zhang, “Analysis of Implementing the IEC61850 Model with MMS-EASE Lite,” Instrumentation Technology, No. 6, 2009, pp. 50-53.
[11] GB/T19582.1-2008 National Standard of the People's Republic of China “The Industrial Automation Network Specification Based on Modbus Part 1: Modbus Application Protocol,” 2008.
[12] GB/T19582.2-2008 National Standard of the People's Republic of China “The Industrial Automation Network Specification Based on Modbus Part 2: Modbus Protocol on the Serial Link Implementation Guide,” 2008.

  
comments powered by Disqus

Copyright © 2018 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.