Share This Article:

Raman Microspectroscopy as a Unique Method of the Investigation of Acid Proof Steel Foil Oxidation

Abstract Full-Text HTML Download Download as PDF (Size:2656KB) PP. 7-12
DOI: 10.4236/opj.2013.35A002    2,101 Downloads   3,884 Views   Citations

ABSTRACT

In this paper, the results of the investigation of the morphology and phase composition of the oxide layers formed on the surface of the 1H18N9T acid proof steel foil by confocal Raman micro-spectroscopy with optical microscopy, SEM, XRD and TEM-EDS-SADP are presented. The foil oxidation was performed by thermo-programmed heating up to 823, 1023 or 1113 K and next annealing at the final temperatures in the air flow for 48 h, 4 h and 4 h, respectively. The great advantages of the use of the Raman spectroscopy for the phase determining in the oxide layers on the acid proof steel foil are shown. Moreover the possibility of applying the optical microscopy for investigation of the surface morphology of both the initial steel foil and the oxide layers is pointed out.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

A. Wesełucha-Birczyńska, J. Dutkiewicz, E. Bielańska, L. Lityńska-Dobrzyńska, M. Kozicki, W. Łasocha, A. Rafalska-Łasocha and M. Najbar, "Raman Microspectroscopy as a Unique Method of the Investigation of Acid Proof Steel Foil Oxidation," Optics and Photonics Journal, Vol. 3 No. 5A, 2013, pp. 7-12. doi: 10.4236/opj.2013.35A002.

References

[1] J Camra, E. Bielańska, A. Bernasik, K. Kowalski, M. Zimowska, A. Bialas and M. Najbar, “Role of Al Segregation and High Affinity to Oxygen in Formation of Adhesive Alumina Layers on FeCr Alloy Support,” Catalysis Today, Vol. 105, No. 3-4, 2005, pp. 629-633. doi:10.1016/j.cattod.2005.06.015
[2] E. Bielańska, J. Camra, J. Dutkiewicz, P. Kornelak, M. Najbar, A. Weselucha-Birczyńska and T. Wilkosz, “Oxidation of Acid-Proof Steel Foil as a Method of Deposition of Phases Active in Nitrogen Oxides Decomposition on Metallic Monolith Walls,” Advanced Materials Research, Vol. 651, 2013, pp. 317-320. doi:10.4028/www.scientific.net/AMR.651.317
[3] J. Dutkiewicz, S. Janiga, I. Nazarczuk, M. Kozicki, P. Kornelak and M. Najbar, “Effect of Soot on NO Decomposition in O2 and SO2 Presence over Ni-Cr-Fe Oxide Catalysts,” Proceeding of the International Symposium on Nitrogen Oxides Emission Abatement, Zakopane, 4-7 September 2011, pp. 137-138.
[4] I. R. Beattie and T. R. Gilson, “The Single-Crystal Raman Spectra of Nearly Opaque Materials. Iron(III) Oxide and Chromium(III) Oxide,” Journal of the Chemical Society (A), 1970, pp. 980-986.
[5] D. L. A. de Faria, S. V. Silva and M. T. de Oliveira, “Raman Microspectroscopy of Some Iron Oxides and Oxyhydroxides,” Journal of Raman Spectroscopy, Vol. 28, No. 11, 1997, pp. 873-878. doi:10.1002/(SICI)1097-4555(199711)28:11<873::AID-JRS177>3.0.CO;2-B
[6] O. N. Shebanova and P. Lazor, “Raman Spectroscopic Study of Magnetite (FeFe2O4): A New Assignment for the Vibrational Spectrum,” Journal of Solid State Chemistry, Vol. 174, No. 2, 2003, pp. 424-430. doi:10.1016/S0022-4596(03)00294-9
[7] R. T. Downs, “The RRUFF Project: An Integrated Study of the Chemistry, Crystallography, Raman and Infrared Spectroscopy of Minerals,” Proceedings of the 19th General Meeting of the International Mineralogical Association, Kobe, 23-28 July 2006, pp. 3-13.
[8] Y. Chen, Z. Liu, S. P. Ringer, Z. Tong, X. Cui and Y. Chen, “Selective Oxidation Synthesis of MnCr2O4 Spinel Nanowires from Commercial Stainless Steel Foil,” Crystal Growth & Design, Vol. 7, No. 11, 2007, pp. 2279-2281. doi:10.1021/cg070514a

  
comments powered by Disqus

Copyright © 2018 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.