Evaluation of the Ultimate Capacity of Friction Piles

Wael N. Abd Elsamee

Faculty of Engineering, Sinai University, El Arish, Egypt.

DOI: 10.4236/eng.2012.411100                

Abstract

The precise prediction of maximum load carrying capacity of bored piles is a complex problem because the load is a function of a large number of factors. These factors include method of boring, method of concreting, quality of concrete, expertise of the construction staff, the ground conditions and the pile geometry. To ascertain the field performance and estimate load carrying capacities of piles, in-situ pile load tests are conducted. Due to practical and time constraints, it is not possible to load the pile up-to failure. In this study, field pile load test data is analyzed to estimate the ultimate load for friction piles. The analysis is based on three pile load test results. The tests are conducted at the site of The Cultural and Recreational Complex project in Port Said, Egypt. Three pile load tests are performed on bored piles of 900 mm diameter and 50 m length. Geotechnical investigations at the site are carried out to a maximum depth of 60 m. Ultimate capacities of piles are determined according to different methods including Egyptian Code of practice (2005), Tan-gent-tangent, Hansen (1963), Chin (1970), Ahmed and Pise (1997) and Decourt (1999). It was concluded that approxi- mately 8% of the ultimate load is resisted by bearing at the base of the pile, and that up to 92% of the load is resisted by friction along the shaft. Based on a comparison of pile capacity predictions using different method, recommendations are made. A new method is proposed to calculate the ultimate capacity of the pile from pile load test data. The ultimate capacity of the bored piles predicted using the proposed method appears to be reliable and compares well to different available methods.

Keywords

Soil; Pile Capacity; Bored Pile; Friction Pile; Pile Load

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	U. A. A. Mirza, “Pile Skin Friction in Clays,” International Journal of Offshore and Polar Engineering, Vol. 7, No. 1, 1997, pp. 538-540.
[2]	D. M. Dewaikar and M. J. Pallavi, “Analysis of Pile Load Tests Data,” Journal of Southeast Asian Geotechnical Society, Vol. 6, No. 4, 2000, pp. 27-39.
[3]	F. I. Nabil, “Axial Load Tests on Bored Piles and Pile Groups in Cemented Sands,” Journal of Geotechnical and Geoenvironmental Engineering, Vol. 127, No. 9, 2001, pp. 766-733. doi:10.1061/(ASCE)1090-0241(2001)127:9(766)
[4]	G. E. Abdelrahman, E. M. Shaarawi and K. S. Abouzaid, “Interpretation of Axial Pile Load Test Results for Continuous Flight Auger Piles,” Emerging Technologies in Structural Engineering, Proceedings of the 9th Arab Structural Engineering Conference, Abu Dhabi, 29 November1 December 2003, pp. 791-802.
[5]	M. Wehnert and P. A. Vermeer, “Numerical Analysis of Load Test on Bored Piles,” Proceedings of the Ninth International Symposium on “Numerical Models in Geomechanics”, Ottawa, 25-27 August 2004, pp. 1-6.
[6]	A. M. Radwan, A. H. Abdel-rahman, M. Rabie and M. F. Awad-Allah, “New Suggested Approach for Design of Large Diameter Bored Piles Based on Finite Element Analysis,” Twelfth International Colloquium on Structural and Geotechnical Engineering (12th ICSGE), 10-12 December 2007, Cairo, pp. 340-357.
[7]	Egyptian Code, “Soil Mechanics and Foundation,” Organization, Cairo, 2005.
[8]	A. Akbar, S. Khilji, S. B. Khan, M. S. Qureshi and M. Sattar, “Shaft Friction of Bored Piles in Hard Clay,” Pakistan Journal of Engineering and Applied Science, Vol. 3, 2008, pp. 54-60.
[9]	H. H. Al Jairry, “Exact Probability Equation for Friction Piles in Clay,” Iraqi Journal of Civil Engineering, Vol. 6, No. 1, 2009, pp. 791-802.
[10]	J. B. Hansen, “Discussion on Hyperbolic Stress-Strain Response, Cohesive Soils,” Journal for Soil Mechanics and Foundation Engineering, Vol. 89, 1963, pp. 241242.
[11]	F. K. Chin, “Estimation of the Ultimate Load of Piles from Tests Not Carried to Failure,” Proceedings of Second Southeast Asian Conference on Soil Engineering, Singapore City, 11-15 June 1970, pp. 81-92.
[12]	F. Ahmed and P. J. Pise, “Pile Load Test Data-Interpretation & Correlation Study,” Indian Geotechnical Conference, Vadodara, 17-20 December 1997, pp. 443-446.
[13]	L. Decourt, “Behavior of Foundations under Working Load Conditions,” Proceedings of the 11th Pan-American Conference on Soil Mechanics and Geotechnical Engineering, Foz DoIguassu, August 1999, Vol. 4, pp. 453-488.