[1]
|
Additive Manufacturing of Functionally Graded Materials: A Comprehensive Review
International Journal of Precision Engineering and Manufacturing,
2024
DOI:10.1007/s12541-023-00864-x
|
|
|
[2]
|
Formation characteristics and properties of an explosion-welded steel–aluminum composite with a diffusion barrier
Composite Interfaces,
2024
DOI:10.1080/09276440.2023.2248767
|
|
|
[3]
|
Characterization of a functionally graded material produced using a new designed blender
Physica Scripta,
2024
DOI:10.1088/1402-4896/ad203b
|
|
|
[4]
|
Tailoring Electrical Properties in Carbon Nanomaterial Patterns with Multimaterial Aerosol Jet Printing
ACS Applied Materials & Interfaces,
2023
DOI:10.1021/acsami.3c15088
|
|
|
[5]
|
Pitting corrosion studies on functionally graded Inconel 825-SS316L wall manufactured by wire arc additive manufacturing
Engineering Research Express,
2022
DOI:10.1088/2631-8695/ac8148
|
|
|
[6]
|
Resistance Spot Welding of Dissimilar Alloys 1008 Low Carbon Steel- 1100 Aluminum Alloy
Materials Science Forum,
2021
DOI:10.4028/www.scientific.net/MSF.1039.144
|
|
|
[7]
|
Fonksiyonel Derecelendirilmiş Malzemelerin Mekanik Karakterizasyonu
5th International Students Science Congress,
2021
DOI:10.52460/issc.2021.041
|
|
|
[8]
|
Advanced Surface Coating Techniques for Modern Industrial Applications
Advances in Chemical and Materials Engineering,
2021
DOI:10.4018/978-1-7998-4870-7.ch007
|
|
|
[9]
|
Theoretical analysis of fracture in non-linear elastic functionally graded beam of linearly changing thickness with three longitudinal cracks
IOP Conference Series: Materials Science and Engineering,
2020
DOI:10.1088/1757-899X/1002/1/012006
|
|
|
[10]
|
Determination of thermophysical properties and density volume fractions of Al2O3/Y-ZrO2 layered composite materials using transient thermography and two-stage inverse nonlinear heat conduction analysis
Journal of Applied Physics,
2020
DOI:10.1063/1.5116709
|
|
|
[11]
|
Effects of the beam cross-section geometry on the lengthwise fracture of inhomogeneous beams
Procedia Structural Integrity,
2020
DOI:10.1016/j.prostr.2020.04.015
|
|
|
[12]
|
Inhomogeneous beams of circular cross-section under axial forces: a longitudinal fracture analysis
Procedia Structural Integrity,
2020
DOI:10.1016/j.prostr.2020.06.009
|
|
|
[13]
|
Longitudinal fracture analysis of inhomogeneous beams with continuously changing radius of cross-section along the beam length
Strength, Fracture and Complexity,
2020
DOI:10.3233/SFC-200250
|
|
|
[14]
|
Characterization of aluminum based functionally graded composites developed via friction stir processing
Transactions of Nonferrous Metals Society of China,
2020
DOI:10.1016/S1003-6326(20)65335-3
|
|
|
[15]
|
Longitudinal cracks in non-linear elastic inhomogeneous round bars subjected to tension
Procedia Structural Integrity,
2020
DOI:10.1016/j.prostr.2020.11.105
|
|
|
[16]
|
Longitudinal fracture analysis of inhomogeneous non-linear elastic rod with internal crack in torsion
Procedia Structural Integrity,
2020
DOI:10.1016/j.prostr.2020.11.104
|
|
|
[17]
|
Longitudinal fracture analysis of continuously inhomogeneous beam in torsion with stress relaxation
Procedia Structural Integrity,
2020
DOI:10.1016/j.prostr.2020.11.103
|
|
|
[18]
|
Longitudinal cracks in non-linear elastic inhomogeneous round bars subjected to tension
Procedia Structural Integrity,
2020
DOI:10.1016/j.prostr.2020.11.105
|
|
|
[19]
|
Longitudinal fracture analysis of inhomogeneous non-linear elastic rod with internal crack in torsion
Procedia Structural Integrity,
2020
DOI:10.1016/j.prostr.2020.11.104
|
|
|
[20]
|
Inhomogeneous beams of circular cross-section under axial forces: a longitudinal fracture analysis
Procedia Structural Integrity,
2020
DOI:10.1016/j.prostr.2020.06.009
|
|
|
[21]
|
Longitudinal fracture analysis of continuously inhomogeneous beam in torsion with stress relaxation
Procedia Structural Integrity,
2020
DOI:10.1016/j.prostr.2020.11.103
|
|
|
[22]
|
Determination of thermophysical properties and density volume fractions of Al2O3/Y-ZrO2 layered composite materials using transient thermography and two-stage inverse nonlinear heat conduction analysis
Journal of Applied Physics,
2020
DOI:10.1063/1.5116709
|
|
|
[23]
|
Longitudinal cracks in non-linear elastic inhomogeneous round bars subjected to tension
Procedia Structural Integrity,
2020
DOI:10.1016/j.prostr.2020.11.105
|
|
|
[24]
|
Longitudinal fracture analysis of inhomogeneous non-linear elastic rod with internal crack in torsion
Procedia Structural Integrity,
2020
DOI:10.1016/j.prostr.2020.11.104
|
|
|
[25]
|
Longitudinal fracture analysis of continuously inhomogeneous beam in torsion with stress relaxation
Procedia Structural Integrity,
2020
DOI:10.1016/j.prostr.2020.11.103
|
|
|
[26]
|
Effects of a temperature cycle on a rotating shrink fit with FGM‐hub
PAMM,
2019
DOI:10.1002/pamm.201900136
|
|
|
[27]
|
Elastic state of functionally graded curved beam on the plane stress state subject to thermal load
Mechanics Based Design of Structures and Machines,
2019
DOI:10.1080/15397734.2019.1660890
|
|
|
[28]
|
FGM Beam analysis in Dynamical and Thermal surroundings using Finite Element Method
Materials Today: Proceedings,
2019
DOI:10.1016/j.matpr.2019.07.301
|
|
|
[29]
|
Effects of a temperature cycle on a rotating shrink fit with FGM‐hub
PAMM,
2019
DOI:10.1002/pamm.201900136
|
|
|
[30]
|
On the design of rotating elastic shrink fits with annular inclusion and functionally graded hub
Mechanics Based Design of Structures and Machines,
2019
DOI:10.1080/15397734.2018.1549497
|
|
|
[31]
|
Non-linear elastic analysis of delamination in two-dimensional functionally graded multilayered beams
Strength, Fracture and Complexity,
2019
DOI:10.3233/SFC-180233
|
|
|
[32]
|
Functionally Graded Materials: An Overview of Stability, Buckling, and Free Vibration Analysis
Advances in Materials Science and Engineering,
2019
DOI:10.1155/2019/1354150
|
|
|
[33]
|
On processing and flexural behaviour of functionally graded clads developed through microwave irradiation
Materials Research Express,
2019
DOI:10.1088/2053-1591/ab11ea
|
|
|
[34]
|
Effects of homogeneous and inhomogeneous heating on rotating shrink fits with annular inclusion and functionally graded hub
Journal of Thermal Stresses,
2019
DOI:10.1080/01495739.2019.1638856
|
|
|
[35]
|
Development of Gradient Concentrated Single-Phase Fine Mg-Zn Particles and Effect on Structure and Mechanical Properties
Journal of Engineering Materials and Technology,
2019
DOI:10.1115/1.4041865
|
|
|
[36]
|
Numerical Investigation of Heat Transfer Enhancement Inside the Pipes Filled With Radial Pore-Size Gradient Porous Materials
Journal of Thermal Science and Engineering Applications,
2018
DOI:10.1115/1.4040276
|
|
|
[37]
|
Fracture analysis of a three-dimensional functionally graded beam
International Journal of Structural Integrity,
2018
DOI:10.1108/IJSI-12-2016-0037
|
|
|
[38]
|
Non-linear fracture analysis of multilayered two-dimensional graded beams
Multidiscipline Modeling in Materials and Structures,
2018
DOI:10.1108/MMMS-09-2017-0107
|
|
|
[39]
|
Non-linear fracture in bi-directional graded shafts in torsion
Multidiscipline Modeling in Materials and Structures,
2018
DOI:10.1108/MMMS-12-2017-0163
|
|
|
[40]
|
Mechanical and Wear Properties of Functionally Graded Cu-11Ni-4Si/ Graphite Composite
Silicon,
2018
DOI:10.1007/s12633-018-0048-1
|
|
|
[41]
|
Thermally assembled shrink fit with annular inclusion and FGM‐hub
PAMM,
2018
DOI:10.1002/pamm.201800042
|
|
|
[42]
|
Functionally Graded Materials: An Overview of Dental Applications
World Journal of Dentistry,
2018
DOI:10.5005/jp-journals-10015-1523
|
|
|
[43]
|
Thermally assembled shrink fit with annular inclusion and FGM‐hub
PAMM,
2018
DOI:10.1002/pamm.201800042
|
|
|
[44]
|
Sıcak Presleme Yöntemiyle Üretilmiş B4C Takviyeli AA 7xxx Matrisli Fonksiyonel Derecelendirilmiş Malzemelerin Çapraz Kırılma Dayanımının Belirlenmesi
Muş Alparslan Üniversitesi Fen Bilimleri Dergisi,
2017
DOI:10.18586/msufbd.322494
|
|
|
[45]
|
Delamination fracture analysis of an elastic-plastic functionally graded multilayered beam
International Journal of Mechanical and Materials Engineering,
2017
DOI:10.1186/s40712-017-0073-7
|
|
|
[46]
|
Design and characterization of isothermal chambers filled with gradient-porous materials
Journal of Thermal Science and Technology,
2017
DOI:10.1299/jtst.2017jtst0008
|
|
|
[47]
|
Design of Zirconia-Aluminum Functionally Graded Material for Buckling and Vibration Characteristics Enhancement of Beam/Column Structure
Key Engineering Materials,
2017
DOI:10.4028/www.scientific.net/KEM.735.100
|
|
|
[48]
|
Manufacturing and Micro structure study of Al-SiC Functionally graded material
Materials Today: Proceedings,
2017
DOI:10.1016/j.matpr.2017.01.065
|
|
|
[49]
|
Analytical study of elastic-plastic longitudinal fracture in a functionally graded beam
Strength, Fracture and Complexity,
2017
DOI:10.3233/SFC-170197
|
|
|
[50]
|
A brief review of functionally graded materials
MATEC Web of Conferences,
2017
DOI:10.1051/matecconf/201713103010
|
|
|
[51]
|
Wave Propagation in Materials and Structures
2016
DOI:10.1201/9781315372099-20
|
|
|
[52]
|
Thermally loaded thick‐walled cylindrically curved aluminum/steel‐FGM‐panel
PAMM,
2016
DOI:10.1002/pamm.201610081
|
|
|
[53]
|
Shrink fit with FGM‐hub subject to heating and rotation
PAMM,
2015
DOI:10.1002/pamm.201510075
|
|
|
[54]
|
FEM Simulation of the Bending Angle During the Laser Forming of FGM Plates
Journal of Thermal Stresses,
2015
DOI:10.1080/01495739.2015.1039929
|
|
|
[55]
|
Characterization of Microscale Drilling Process for Functionally Graded M2-Cu Material Using Design of Experiments
Journal of the Korean Society of Manufacturing Technology Engineers,
2015
DOI:10.7735/ksmte.2015.24.5.502
|
|
|
[56]
|
Property Estimation of Functionally Graded Materials Between M2 Tool Steel and Cu Fabricated by Powder Metallurgy
Transactions of the Korean Society of Mechanical Engineers A,
2014
DOI:10.3795/KSME-A.2014.38.9.953
|
|
|