Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Model for Predictive Analysis of the Quantity of Water Evaporated during the Primary-Stage Processing of Bioceramic Material Sourced from Kaolin"
written by C. I. Nwoye, K. Okeke, M. C. Obi, U. Nwanyanwu, G. C. Obasi, O. O. Onyemaobi,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Model for Computational Analysis and Predictive Assessment of Bulk Density of Fired Bricks Based on Incurred Shrinkage
Journal of Innovative Research in Engineering and Sciences, 2016
[2] Multi-Factorial Based Assessment and Prediction of the Shrinkage Sustained In Fired Clay Materials
Indian Journal of Applied Engineering Research , 2013
[3] Development of a model for Comparative Analysis and Assessment of Preferred Experimental Techniques
SAUSSUREA, 2012
[4] Application of Process Data Analytical Method for Comparative Assessment and Determination of Limits of Viability
SAUSSUREA, 2011
[5] Model for Periodic Analysis of the Quantity of Water Evaporated during Thermo-processing of Clay Designated for Production of Oven Refractory
Journal of Minerals and Materials Characterization and Engineering, 2011
[6] Model for the calculation of the quantity of water evaporated during drying of olokoro clay
2010
[7] Model for Computational Analysis of the Quantity of Water Evaporated during Initial Stage Drying of Wet Clay Designated for Production of Spark Plug Ceramic Component
Academia Arena, 2010
[8] Determination of Average Grain Sizes and Water Evaporation Rates of Some Nigeria Clays at Oven Drying Temperature
Report and Opinion, 2010
[9] Models for Comparative Analysis, Assessment and Adoption of Preferred Experimental Techniques
CI Nwoye, CC Nwoye, M Obi, G Obasi, OO Onyemaobi - sciencepub.net, 2010
[10] Effect of Water-Steam Transition Temperature on the Evaporation of Water and Shrinkage of Clay during Oven Drying of Clays
CI Nwoye - sciencepub.net, 2010
[11] Model for Mathematical Analysis and Predicting the Shrinkage-Induced Final Length of Fired Clay Products
CI Nwoye, IE Mbuka - sciencepub.net, 2010
[12] Model for Computational and Predictive Analysis of Dried Length during Initial Air-Drying of Wet Clay Products
CI Nwoye, IE Mbuka - sciencepub.net, 2010
[13] Model for the Assessment and Computational Analysis of the Shrinkage Sustained in Kaolin Based Thermoprocessed Bioceramic Materials Relative to the Resultant Bulk Density
CI Nwoye, K Okeke, M Obi - africanbmes.org, 2010
[14] Process Data Analytical Method for Comparative Assessment and Determination of Limits of Viability of Various Experimental Techniques Applied
CI Nwoye - sciencepub.net, 2010
[15] Model for Random Assessment of Evaporated Water during Processing of Clay Designated for Production of Ceramic Metal Composite Used for Knee and Spinal Implants
Afr J Med Phy, Biomed Eng & Sc, 2010
[16] Model for the Assessment and Computational Analysis of the Shrinkage Sustained in Kaolin Based Thermoprocessed Bioceramic Materials Relative to the …
2010
[17] Effect of water-steam transition temperature on the evaporation of clay during oven drying of clay
2010
[18] 1 Department of Materials and Metallurgical Engineering, Federal University of Technology, Owerri, Nigeria. 2 Department of Material Science, Oxford …
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top