J. F. Yue , S. H. Liang, X. Y. Ning, et al., “Structural Features and Performance Analysis of Wall-arrangement Tangential Firing System for a 600 MW Ultra Supercritical Boiler,” Journal of Chinese Society of Power Engineering, Vol. 31, No. 8, 2011, pp. 598-604.

has been cited by the following article:

• TITLE: Study on Calculation Method for Partition of Heat Transfer in an Ultra-supercritical Boiler

  AUTHORS: Ye Teng, Zhongxiao Zhang, Xudan Liu, Wei Liu, Tuo Zhou, Ming Zhu

  KEYWORDS: Ultra-supercritical; Flue Gas Temperature; Heat Load; Heat Transfer Deterioration

  JOURNAL NAME: Energy and Power Engineering, Vol.5 No.4B, October 16, 2013

  ABSTRACT: Use a 1000MW ultra-supercritical tower boiler as the research object. On the basis of one dimensional model, simplify the tube heat transfer model and the radiation heat transfer model; establish the two-dimensional area calculation model with the regional method;summarize the heat load distribution of flue gas temperature and water wall surface; and compare with the measured data. The error range of the result is acceptable on the project. The distribution of water wall surface heat load along the furnace width and the area where heat transfer deteriorationcause easily along the furnace height direction are studied with the model and algorithm on different boiler load conditions. All these provide the reference for the design and operation of the ultra supercritical boiler.